|
|
|
Burn processed failed at 2.4X for data files? DVD+R DL disk
|
|
Member
|
28. March 2007 @ 17:52 |
Link to this message
|
Hi well first I try to burn alot of data onto my Dual Layer Disk but i get error "Compliant will not fit onto blank disc."
And i know i put less MB on my Dual Layer Disk then there is capable so i should have enough room. Here is log.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.3
Recorder: <LITE-ON DVDRW LH-18A1P> Version: GL0C - HA 1 TA 1 - 6.3.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <TSSTcorp DVD-ROM SH-D162C>Version: TS04 - HA 1 TA 0 - 6.3.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 4K040H2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3200820A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM SH-D162C atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-18A1P atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM SH-D162 D: CDRom0
LITE-ON DVDRW LH-18A1P F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 53477376 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 351MB (359920kB)
Free physical memory: 137MB (140444kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.3.2007
ISO compilation
6:46:21 PM #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:46:21 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
6:46:21 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
6:46:21 PM #4 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media
6:46:22 PM #5 Phase 41 File dlgbrnst.cpp, Line 1800
Compilation will not fit onto a blank disc
6:46:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
6:46:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: LITE-ON DVDRW LH-18A1P, Media type: DVD+R9 Dual Layer
Disc Manufacturer ID: RICOHJPN, Media Type ID: D01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
6:46:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)
So then i just try to fill my DL disk as if it were a Single layer DVD+R Disk and i get this...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
Nero version: 6.3.0.3
Recorder: <LITE-ON DVDRW LH-18A1P> Version: GL0C - HA 1 TA 1 - 6.3.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <TSSTcorp DVD-ROM SH-D162C>Version: TS04 - HA 1 TA 0 - 6.3.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 4K040H2 atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3200820A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM SH-D162C atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-18A1P atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM SH-D162 D: CDRom0
LITE-ON DVDRW LH-18A1P F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 53477376 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 351MB (359920kB)
Free physical memory: 124MB (127024kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.3.2007
ISO compilation
6:25:53 PM #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:25:53 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
6:25:53 PM #3 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LH-18A1P running
6:25:53 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
6:25:53 PM #5 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media
6:25:53 PM #6 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 2176287 (483:37.12, 4250MB)
6:25:53 PM #7 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE
6:25:53 PM #8 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: LITE-ON DVDRW LH-18A1P, Media type: DVD+R9 Dual Layer
Disc Manufacturer ID: RICOHJPN, Media Type ID: D01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
6:25:53 PM #9 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:25:53 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2176288 (2176288) = #2176288/483:37.13
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2176288 blocks [LITE-ON DVDRW LH-18A1P ]
--------------------------------------------------------------
6:25:54 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [LITE-ON DVDRW LH-18A1P ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4457037824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2176288 | lead-out | 1 | 0x00 | 0x41
6:25:54 PM #12 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started
6:25:54 PM #13 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.
6:25:54 PM #14 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed
6:25:54 PM #15 Phase 28 File dlgbrnst.cpp, Line 1800
Speed measurement started
6:25:54 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:28:35 PM #17 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LH-18A1P > start writing Lead-Out at LBA 2176288 (213520h), lenght 0 blocks
6:28:35 PM #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:28:35 PM #19 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
6:28:35 PM #20 Phase 29 File dlgbrnst.cpp, Line 1751
Speed measurement completed: 19.7x (27,304 KB/s)
6:28:35 PM #21 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 2.4x (3,312 KB/s)
6:28:35 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:28:35 PM #23 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 13:30,625 (810625ms) -> OK
6:28:35 PM #24 Text 0 File DVDR.cpp, Line 1512
Recording mode: unknown Recording Mode
6:28:35 PM #25 Text 0 File Mmc.cpp, Line 19487
Set BUFE: SMART-BURN -> ON , SMART-BURN : ON
6:28:35 PM #26 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes
6:28:35 PM #27 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22D7FF h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 03 52 49 43 4F 48 4A - 50 4E 44 30 31 02 40 25 ..RICOHJPND01.@%
25 37 10 00 2C 6C 00 2C - 6C 20 1F 0C 0C 14 14 02 %7..,l.,l.......
01 01 20 00 20 1F 0C 0C - 14 14 02 01 01 20 00 04 ................
6:30:05 PM #28 SCSI -1106 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x037B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
6:30:05 PM #29 CDR -1106 File Writer.cpp, Line 301
Power calibration error
6:30:05 PM #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:30:05 PM #31 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
6:30:06 PM #32 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was -1
6:30:06 PM #33 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
6:30:06 PM #34 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
6:30:06 PM #35 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 2.4x (3,312 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)
|
Senior Member
1 product review
|
28. March 2007 @ 18:38 |
Link to this message
|
|
what DL Disc are you using? thats all i can say about this, sorry i can't get anything out of the log.
|
Moderator
|
28. March 2007 @ 19:19 |
Link to this message
|
Hi koolyoe
Here's some more suggestions:
Nero version: 6.3.0.3
Update Nero - this older version didn't handle dual layeras well as the newer versions.
Update package 1 - 6.6.1.5. - link
Recorder: <LITE-ON DVDRW LH-18A1P> Version: GL0C Update the firmware to GLOF
Disc Manufacturer ID: RICOHJPN
Not sure how good Ricoh made DL's are - the best is Verbatim.
Give the updates and go.
Keep us posted.
This message has been edited since posting. Last time this message was edited on 28. March 2007 @ 19:20
|
|
