|
|
|
DVD-shrink not burning
|
|
|
robpardee
Junior Member
|
10. April 2007 @ 18:18 |
Link to this message
|
I have had trouble with several movies now that I shouldn't have any trouble with. I successfuly can analyze and encode my movies but when it comes to the burning part it will say checking disc then "Phase:write in" and my burner freezes and it won't respond until I unplug it and plug it back in then shrink says that it couldn't burn the movie and has been doing this for some time now. I have Nero and have had no real trouble burning until just yesterday when this started. I just can't get it to write anything to a disc, it just keeps freezing on me. HELP!!!!
P.S. I have tried restarting, reinstalling shrink and redoing the whole disc again and nothing yet.
"A setback is just a chance to do twice the damage the next time around."
|
|
Advertisement
|
|
|
|
Senior Member
|
10. April 2007 @ 19:29 |
Link to this message
|
hello,
i assume you are autoburning with Nero, right?
If you post a burn log that would help us help you
You can find it here program files/nero/nero/core
look for the nerohistory.txt file
dont forget to edit your serial number out.
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson |
Senior Member
1 product review
|
10. April 2007 @ 23:02 |
Link to this message
|
|
Just to clarify....
DVD Shrink cannot burn disks all by itself. There is no burning engine in the program. It can recognize three programs and start them to do the burn.
They are:
CopytoDVD
DVD Decrypter
Nero
Since Shrink can't burn, then there's a problem with whichever burn program that you are using.
|
|
robpardee
Junior Member
|
11. April 2007 @ 05:47 |
Link to this message
|
I found a nerohistory.log file. I am using Nero and I have had this problem a long time ago but it hadn't done it in a long time until now. Here is what the last log says:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 8/8/2006 11:20:04 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <HP DVD Writer 840e> Version: 68JH - HA 2 TA 0 - 6.6.0.16
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI CDRW/DVD SBW242C atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
QSI CDRW/DVD SBW242C D: CDRom0
HP DVD Writer 840e E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 445MB (456176kB)
Free physical memory: 107MB (109664kB)
Memory in use : 75
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.4.2007
NeroAPI
10:02:19 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
10:02:19 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
10:02:19 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
10:02:21 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
10:02:21 PM #5 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 840e running
10:02:21 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
10:02:21 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:02:21 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:02:21 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:02:21 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2227775 (495:03.50, 4351MB)
10:02:21 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
10:02:21 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 840e, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
10:02:21 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:02:21 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2227776 (2227776) = #2227776/495:3.51
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227776 blocks [HP DVD Writer 840e]
--------------------------------------------------------------
10:02:21 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 840e] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4562485248, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2227776 | lead-out | 1 | 0x41 | 0x00
10:02:24 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
10:02:24 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
10:02:24 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
10:02:24 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
10:02:24 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:02:24 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode
10:02:24 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON
10:02:24 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes
10:02:24 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:05:47 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00BD0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
10:05:47 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x09091400
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
10:05:47 PM #27 Text 0 File Mmc.cpp, Line 19340
Writer-Buffer for HP DVD Writer 840e\H2 T0 reduced to 32768Bytes
10:05:47 PM #28 SCSI -500 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x09091400
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
10:05:47 PM #29 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
HP DVD Writer 840e\H2 T0
10:05:47 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:05:47 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:05:47 PM #32 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1
10:05:47 PM #33 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07182340
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
10:05:47 PM #34 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07182340
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
10:05:49 PM #35 CDR -500 File WriterStatus.cpp, Line 167
SCSI command aborted
HP DVD Writer 840e\H2 T0
10:05:49 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
10:05:49 PM #37 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07182340
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
10:05:49 PM #38 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07182340
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
10:05:50 PM #39 CDR -500 File WriterStatus.cpp, Line 172
SCSI command aborted
HP DVD Writer 840e\H2 T0
10:05:50 PM #40 TRANSFER -39 File WriterStatus.cpp, Line 172
Could not perform EndSession
10:05:50 PM #41 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
10:05:50 PM #42 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
10:05:50 PM #43 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
10:05:50 PM #44 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
10:05:52 PM #45 SCSI -500 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 6:00:00 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 8/8/2006 11:20:03 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 6:00:00 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
"A setback is just a chance to do twice the damage the next time around."
|
Moderator
|
11. April 2007 @ 09:56 |
Link to this message
|
i don't dissect Nero logs anymore, i've done literally 1000's of them, they drive me mad :)
but i'll make an exception (just don't tell any of the regulars LOL)..
Quote:
Nero API version: 6.6.0.16
- that version is absolutely fine and stable/bug free
Quote:
Recorder: <HP DVD Writer 840e> Version: 68JH
- burners' firmware's up to date according to this - http://h10025.www1.hp.com/ewfrf/wc/softw...&dlc=en&lang=en
Quote:
Physical memory : 445MB (456176kB)
Free physical memory: 107MB (109664kB)
Memory in use : 75
- that's not good, virtually no free memory so the hard drive will be 'swapping' ie thrashing the hard disk using the hasd disk as virtual memory (not good, especially during a burn)
Quote:
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
- this is the one bit i've never figured out about Nero - i don't know if these DRM messages in a Nero log mean you're trying to back up a movie that's still 'protected', or not..
edit- i re-read your first post, you reckon you're dealing with the movie encryption fine, so it should be safe to ignore this section..
Quote:
Recorder: HP DVD Writer 840e, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
- firmware quite happily understands/recognises those (very nice) disks
Quote:
Writer-Buffer for HP DVD Writer 840e\H2 T0 reduced to 32768Bytes
- hmmm, see my comment about lack of free memory
Quote:
Burn process failed at 8x (11,080 KB/s) - try 4x
[quote]Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 6:00:00 PM
that's Roxio, which 'can' interfere with Nero, if you have the packet writing portion of Roxio installed.
more info from a similar problem to yours here - http://forums.afterdawn.com/thread_view.cfm/449874
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***This message has been edited since posting. Last time this message was edited on 11. April 2007 @ 09:59
|
|
robpardee
Junior Member
|
11. April 2007 @ 18:18 |
Link to this message
|
|
Thank you I will check into the memory do you have any suggestions on what to do with it??
THanks again!!
"A setback is just a chance to do twice the damage the next time around."
|
Senior Member
|
11. April 2007 @ 18:58 |
Link to this message
|
|
dont multitask during burning,(running other programs)
get some more ram, another stick of 512mb would help a lot, the more the better.
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
|
|
PacMan777
AfterDawn Addict
|
11. April 2007 @ 22:34 |
Link to this message
|
To make a long story short, the drive wasn't reading the data in the BCA. Then you started getting scsi (drives) aborted errors. I'd suspect something to do with software interfering with the drive(s). A quick way to see and clear things up is to delete all the backup software and then install in steps to see where the problems come in. I'm suspecting packet ware or driver conflicts with Nero and Roxio. Delete both and clean up after Nero with the Nero cleaner tool and RoxiZap for Roxio cleanup. Delete Shrink, even if you have before. Delete the rest of your backup programs if it isn't too difficult. Be sure to delete any packet (batch) writing programs. Clean up, run a reg cleaner and reboot. Install your decryption software, DVD Shrink, and Nero (Do Not Install InCD). I'd reboot to allow Windows a good "handshake" with the programs. Now try a backup and save the log. Use the same media, that's good stuff with MCC. Burn at a reasonable speed (4-8X). If it works good you're in business. If not, post the new Nero burn log.
This message has been edited since posting. Last time this message was edited on 11. April 2007 @ 22:37
|
|
robpardee
Junior Member
|
13. April 2007 @ 11:50 |
Link to this message
|
Were do I find the Nero clean up tool? I looked under program files and in Nero itself. I haven't deleted it yet but I was just wondering where to find this application. So far I have reinstalled everything but Nero.
Thanks for everyone's help!!
"A setback is just a chance to do twice the damage the next time around."
|
|
PacMan777
AfterDawn Addict
|
13. April 2007 @ 15:05 |
Link to this message
|
|
Senior Member
|
13. April 2007 @ 15:53 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 13. April 2007 @ 15:56
|
|
PacMan777
AfterDawn Addict
|
13. April 2007 @ 20:14 |
Link to this message
|
Once you get everything cleaned up and the Nero installed, do a backup and let us know what happens. If the burn fails, include the log. If the burn fails, while you're waiting, install ImgBurn. Use Shrink to transcode your movie to the hard drive. Under target select Create DVD Files: Hard Disk Folder. Use your player software to make sure the files play good and then try burning with ImgBurn. Put a DVD recordable in the drive and don't forget to set the speed. Use Build mode, under Device select your burner, then browse for the folder, select and click the files to DVD (burn) icon and you're there. That tells if it's just one burner program or more than just Nero. Hopefully you won't need to do the extra work, but just in case ...
This message has been edited since posting. Last time this message was edited on 13. April 2007 @ 20:24
|
|
robpardee
Junior Member
|
14. April 2007 @ 08:55 |
Link to this message
|
Ok, I reinstalled Nero now too and used the demo version I'd gotten a link from several people here. It still didn't work but I can't find the Nero history file in this Nero. I looked under program files and the Nero file but I couldn't find it. But it still didnt work this time!
"A setback is just a chance to do twice the damage the next time around."
|
Senior Member
|
14. April 2007 @ 13:23 |
Link to this message
|
If you are using Nero 7 then look in the core folder, thats where it will be, not really sure if it doesn't make if your using a demo, though.
did you use that roxio zap tool to remove that driver?
http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
here is a tool to get rid of it, like creaky said it may be causing the problem with nero
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
This message has been edited since posting. Last time this message was edited on 14. April 2007 @ 13:24
|
|
robpardee
Junior Member
|
14. April 2007 @ 13:36 |
Link to this message
|
Ok thank you I found it. I completely uninstalled Roxio since I don't use it, I'll clear it out now with roxio zap though. P.S. I can't add anymore RAM my computers maxed out now. Here is the last log file:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 8/8/2006 11:20:04 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=169792 bytes, created 3/14/2007 11:43:16 AM
NT-SPTI used
Nero API version: 7.8.5.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 8, 5, 0
Recorder: <HP DVD Writer 840e> Version: 68JH - HA 1 TA 1 - 7.8.5.0
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI CDRW/DVD SBW242C atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
QSI CDRW/DVD SBW242C D: CDRom0
HP DVD Writer 840e E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
BUFE : 0
Physical memory : 445MB (456176kB)
Free physical memory: 192MB (196864kB)
Memory in use : 56
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.4.2007
NeroAPI
12:27:59 PM #1 Phase 112 File APIProgress.cpp, Line 285
DVD-Video files reallocation started
12:28:00 PM #2 Phase 114 File APIProgress.cpp, Line 285
DVD-Video files reallocation completed (no file modified)
12:28:00 PM #3 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted
12:28:00 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:28:01 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:28:01 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
12:28:01 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
12:28:01 PM #8 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
12:28:02 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2227775 (495:03.50, 4351MB)
12:28:02 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO
12:28:02 PM #11 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: HP DVD Writer 840e, Media type: DVD-R
Disc Manufacturer: MCC 02 - RG20
Disc Application Code: 64, Disc Physical Code: 193
12:28:02 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:28:02 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2227776 (2227776) = #2227776/495:3.51
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2227776 blocks [E: HP DVD Writer 840e]
--------------------------------------------------------------
12:28:02 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HP DVD Writer 840e] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4562485248, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2227776 | 0 | 0x00
2227776 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
12:28:02 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:28:02 PM #16 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-No, small files-Yes (<32KB)
12:28:02 PM #17 Phase 24 File APIProgress.cpp, Line 285
Caching of files started
12:28:02 PM #18 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
12:28:02 PM #19 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed
12:28:02 PM #20 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 8x (11,080 KB/s)
12:28:02 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:28:02 PM #22 Text 0 File DVDR.cpp, Line 3192
Recording mode: Sequential Recording Mode
12:28:02 PM #23 Text 0 File DVDR.cpp, Line 3348
Start write address at LBA 0
DVD high compatibility mode: Yes
12:28:02 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x08947040: Len x648
12:28:02 PM #25 Text 0 File Cdrdrv.cpp, Line 9856
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:28:02 PM #26 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 66059200
12:38:32 PM #27 Text 0 File DVDR.cpp, Line 3750
EndDAO: Last written address was -1 (FFFFFFFFh)
12:38:32 PM #28 CDR -1114 File WriterStatus.cpp, Line 162
Reset occurred
E: HP DVD Writer 840e
12:38:32 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
12:38:32 PM #30 Phase 39 File APIProgress.cpp, Line 285
Burn process aborted
12:38:32 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
12:38:32 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
12:38:32 PM #33 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:38:37 PM #34 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
12:38:37 PM #35 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 8/8/2006 11:20:03 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 6:00:00 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
"A setback is just a chance to do twice the damage the next time around."
This message has been edited since posting. Last time this message was edited on 14. April 2007 @ 13:40
|
Senior Member
|
14. April 2007 @ 13:52 |
Link to this message
|
no need to use the roxio zap tool since that driver is not in the log,
it looks like you are getting the same error
have you tried a different burning program to see if Nero is the problem?
try imgBurn(free)
http://www.imgburn.com/index.php?act=download
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
|
|
PacMan777
AfterDawn Addict
|
14. April 2007 @ 14:40 |
Link to this message
|
Originally posted by 300bowler:
no need to use the roxio zap tool since that driver is not in the log,
it looks like you are getting the same error
have you tried a different burning program to see if Nero is the problem?
try imgBurn(free)
http://www.imgburn.com/index.php?act=download
Speaking of like minds. LOL
Originally posted by PacMan777:
... install ImgBurn. Use Shrink to transcode your movie to the hard drive. Under target select Create DVD Files: Hard Disk Folder. Use your player software to make sure the files play good and then try burning with ImgBurn. Put a DVD recordable in the drive and don't forget to set the speed. Use Build mode, under Device select your burner, then browse for the folder, select and click the files to DVD (burn) icon and you're there. That tells if it's just one burner program or more than just Nero...
I was surprised when I came on this evening and there wasn't already a comment as to whether ImgBurn worked or not.
This message has been edited since posting. Last time this message was edited on 14. April 2007 @ 14:41
|
Senior Member
|
14. April 2007 @ 15:40 |
Link to this message
|
|
pacman,
i thought you said something about ImgBurn and i went back to look if you did, and missed that part
guess i need to get my eyes checked. ;) LOL
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
|
|
robpardee
Junior Member
|
14. April 2007 @ 15:46 |
Link to this message
|
I tried selecting the ImgBurn with DVD Decrypter from the DVD Shrink but it didn't work either. I downloaded the ImgBurn program too but I don't know how to use it. I'm getting DVDFab Platnum soon and I'm hoping that that will do it for me.
"A setback is just a chance to do twice the damage the next time around."
|
Senior Member
|
14. April 2007 @ 18:19 |
Link to this message
|
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
|
|
PacMan777
AfterDawn Addict
|
14. April 2007 @ 19:30 |
Link to this message
|
robpardee,
Change the exe file in shrink with the one that supports ImgBurn and you can set Shrink to use ImgBurn automatically.
I advised recording a file folder to the HD because they're more easily accessible for analysis and ediing. You could do ISO and open with a virtual drive. But burning files is no big deal with ImgBurn. The simple outline I provided is enough for those familiar with similar software.
The capture shows all the details for burning files with ImgBurn as I pointed out in my previoius post.
You'll need some of the software to make necessary changes. It's all freeware. Go over the installation instructions and use as much of the software as you need. Click Here for the download.
|
|
robpardee
Junior Member
|
16. April 2007 @ 14:06 |
Link to this message
|
I just obtained DVDFab Platinum and installed it. I have used it before and it has worked in the past but along with the shrink problems I have been having since this didn't work either it seems like the problem is not with shrink or Nero. I say this because I tried to burn and yet again just like everything else I've tried it freezes at the part where it starts to burn the disc it freezes and then says the burn process failed! Since DVDFab has it's own burning program this suggests that my problem before with Nero isn't nero's fault. I have no idea what the problem is but it's frustrating. Does anyone think that uninstalling and reinstalling my DVD drive would help at all? Any other suggestions.
"A setback is just a chance to do twice the damage the next time around."
|
|
PacMan777
AfterDawn Addict
|
16. April 2007 @ 14:15 |
Link to this message
|
Do you think you want to consider the alternatives I offered? If so click
Here for a different method of cleaning up your source files before opening them in the transcoding software. Follow the guide. Them follow my suggestion above.
|
|
robpardee
Junior Member
|
16. April 2007 @ 14:22 |
Link to this message
|
|
Oh yes I saw that link but I'm not familiar with the program or how to do it so I was a little leary to try it.. I actually am still rather new with the whole burning thing and learning all the things I can about it. I will go ahead and download the program and try it out if you have any other recommendations in the mean time let me know. P.S. how do I make ImgBurn the default image burner on Shrink?
"A setback is just a chance to do twice the damage the next time around."
This message has been edited since posting. Last time this message was edited on 16. April 2007 @ 14:25
|
|
Advertisement
|
|
|
|
PacMan777
AfterDawn Addict
|
16. April 2007 @ 14:54 |
Link to this message
|
Originally posted by robpardee:
Oh yes I saw that link but I'm not familiar with the program or how to do it so I was a little leary to try it.. I actually am still rather new with the whole burning thing and learning all the things I can about it. I will go ahead and download the program and try it out if you have any other recommendations in the mean time let me know. P.S. how do I make ImgBurn the default image burner on Shrink?
By doing as I suggested and following the included instructions. If you have any problems just ask. The archive is in a rar format, so you'll need WinRAR or a similar program to open it. If you don't have an archive tool, you can download WinRAR from http://www.download.com (C/Net).
|
|
