|
Mobile Phone Tools Download
|
|
|
jeaniest
Newbie
|
7. January 2005 @ 22:08 |
Link to this message
|
|
|
|
Advertisement
|
 |
|
|
|
kazyel
Account closed as per user's own request
|
7. January 2005 @ 22:12 |
Link to this message
|
|
Thanx a lot....
|
|
corneln
Suspended due to non-functional email address
|
8. January 2005 @ 05:29 |
Link to this message
|
|
could someone tell me how to insert games into my Motorola V180? i have the cable, mobile Phone Tools, PTS, P2k, but i dont know hot to do it. please help me. thanks
:)
|
|
motodude
Suspended due to non-functional email address
|
8. January 2005 @ 10:46 |
Link to this message
|
|
|
achudnow
Newbie
|
11. January 2005 @ 07:05 |
Link to this message
|
|
First, thanks for all the great info on this thread. I've encountered a problem with MPT 3.11 and my V551, perhaps somwone can help. MPT seem to work fine with eveything but the Multimedia Studio. When I launch the MMS the connection to my phone is dropped. Once I quit MMS the connection is reestablished. any thought on this? BTW, I'm using a Bluetooth connection.
|
|
boolagoo
Newbie
|
14. January 2005 @ 09:02 |
Link to this message
|
|
Ive downloaded and installed mobile phone tools v1.23 and updated it to v2.16 and for some reason it wont recognize my v551. How would I go about resolving this? Is v2.16 too early to use with a v551? Ask me if you need any more info.
|
|
Snickerdo
Newbie
|
14. January 2005 @ 17:42 |
Link to this message
|
|
Anyone else get an error when they try to do a LiveUpdate? I can't install 3.11 directly as it gives me some error that ends up screwing up Bluetooth. I can get 2.16 installed and the Bluetooth works fine (detects my V551, even though it can't pair to it because it doesn't support the phone) but when I try and do a LiveUpdate to 3.19 I get some error message. Anyone have any ideas?
|
|
rockdawg
Member
|
14. January 2005 @ 18:38 |
Link to this message
|
|
Was your phone connected while the LiveUpdate was happening? If so, disconnect it and try it again. If not, connect it and try it again. LOL If you've done both of those already, then I don't know what else to do. I have a V220 - it's not bluetooth compatible, so I don't have any experience there.
If it's stupid but works, it isn't stupid.
Hung like Einstein, and smart as a horse!
|
|
Snickerdo
Newbie
|
14. January 2005 @ 19:19 |
Link to this message
|
I tried unpairing the phone and turning off my phone's Bluetooth, but it made no difference. Those are the errors I'm getting. I even tried throwing myself onto the router's DMZ in case it was trying to download the files using some crazy port, made no difference.
|
|
markoss
Newbie
|
17. January 2005 @ 02:22 |
Link to this message
|
|
Somebody please help! I downloaded the file and installed it, though when it tries to install the driver for my phone it says it cannot find the right driver and to pick it from a list. The only thing is my phone isnt there. I have looked all over the internet and my phone, a motorola c650 does work with Mobile Phone Tools. Can someone please tell me if there is an updated version which may work with my phone.
This message has been edited since posting. Last time this message was edited on 17. January 2005 @ 03:15
|
|
Inedhelp9
Newbie
|
27. January 2005 @ 15:33 |
Link to this message
|
|
I have a motorolla V180 phone and i have the mobile edit and mobile phone tools, but i cant get either to recognize my phone. Other threads talk about COM ports 3 and 4, but in my device manager i only have COM 1 and 2. How do i get my phone to be recognized. I have installed the motorolla modem thing too , but it still doesnt work. My computer recognizes it but the software will not. What do I do?
This message has been edited since posting. Last time this message was edited on 27. January 2005 @ 15:33
|
|
rockdawg
Member
|
27. January 2005 @ 16:50 |
Link to this message
|
|
Inedhelp9, in device manager, that's most likely all you will see unless you have an internal modem (or other component that utilizes a virtual COM port like 3 and higher) installed in your computer. You have to go into your modems advanced settings (in XP) to see additional COM ports. when your phone is connected to your pc what is shown under modems (motorola usb modem or similar)?
markoss, what version did you install?
If it's stupid but works, it isn't stupid.
Hung like Einstein, and smart as a horse!
|
|
CdSlc
Newbie
|
28. January 2005 @ 11:33 |
Link to this message
|
|
Snickerdo, the error that you are getting is the same error that I used to get while trying to run LiveUpdate. I did a search in this forum and howardforums.com and found couple of suggestions. After following their suggestion, my LiveUpdate is working perfectly fine.
Let me give you couple of things that I have read about:
1. LiveUpdate has problems in running behind a firewall and/or Anti-Virus.
2. If you are running XP SP2 make sure that you disable the firewall within XP software.
3. If you have your own firewall and/or anti-virus software then disable both of them and reboot your PC. You need to make sure that when the PC boots up they don't start up automatically. There are various ways to do it, but I ran msconfig and in the Startup and Services tab, I disabled all the services that I felt would be related to firewall/anti-virus.
4. After doing all the above steps, see whether you are able to do LiveUpdate. In my case, I could not so I tried a different method.
5. When your PC is booting up, press F8 and go into the setup menu and select the 'Safe Mode With Networking'. This will disable all your unessential services and will just have the bare minimum drivers/services loaded for bare working. Now run LiveUpdate and it should work fine.
6. Now reboot your PC and this time let the PC boot in the Normal Mode. You are now all set.
I personally liked option# 5. This way I don't have to go around messing with firewall/anti-virus software. I don't have to mess with msconfig.
Hope this helps.
|
|
calitails
Newbie
|
28. January 2005 @ 12:08 |
Link to this message
|
|
hi i just bought a usb cable for my motorola phone and installed the mobile phone tool vs.2.16. i can't get it to recognize my phone. help!!!
|
|
Inedhelp9
Newbie
|
28. January 2005 @ 12:35 |
Link to this message
|
|
It says in the modem setting that it is a motorolla modem USB and that it is attached to COM 5. I was able to move it around all of my USB ports to finially get it to COM 3. That is the lowest COM number that it will go to. What do i do now. I tryed connecting the to Mobile Phone Tools V.3.11 Final Retail version but it still just keeps saying intializing and will not connect to the phone.
This message has been edited since posting. Last time this message was edited on 28. January 2005 @ 12:36
|
|
Snickerdo
Newbie
|
28. January 2005 @ 20:49 |
Link to this message
|
|
I formatted my system a few days ago, and sure enough everything is working now. I have a feeling my system was severely screwed prior to cleaning it up last week.
|
|
vietdude
Newbie
|
30. January 2005 @ 21:50 |
Link to this message
|
hi everyone
Hope someone here will help me in resolving a problem i'm having for a month now. I've read almost all the content on this forum , it's very helpful. even though be patient and read and find the right thing is hard but i did for a month searching. now i come to this state that i got to down a verion 3.11 of Mobile phone tool installed. At the end of installation i got some error pop up about "not access ....", but after i ignore it seem to work fine. But it seem that it never recognize my motorola C650. i really want to make the software will work with my C650. Please could somebody here help me solve this problem for a month now without knowing what can be done to make it work. my motorola C650 as i known , should be working okie with the mobile phone tool. Is it because i got the wrong version or something? please help ........by the way i got a nice link here .............
http://coma.fsb.hr/motorola/files/
"Everything is data, but data is not everything"
|
|
daev1988
Newbie
|
5. February 2005 @ 13:56 |
Link to this message
|
|
does anyone know why when i installed the program and everything but the status remains at "Initializing..."? and how could I fix this problem..thanks
|
|
wrateman
Newbie
|
5. February 2005 @ 16:04 |
Link to this message
|
|
OK, I installed the MT 3.11h I found here on my home PC. It actually installed the easiest, and puts up an image of my v551. I synchronized (backed up) from my phone to the PC. However, when I tried to open the phonebook, and other apps, the mouse turns to an hourglass for a few secs, then nothing. My cable is plugged into the USB port in the back, not a USB hub.
I ran LiveUpdate, which was successful, I'm now at 3.19e. Still nothing.
On my work PC, I installed 3.17 which I bought off eBay w/ my data cable. This installation can't display the image of my phone, but....the apps run successfully. I've been able to DL .mp3s to my phone as ringtones, etc. This version can't LU as it's behind the f/w at work. I may bring my laptop home and run off my network at home.
Any suggestions for the home PC? Why won't my apps like phonebook open up?
TIA.
|
|
xdarahx
Newbie
|
5. February 2005 @ 20:14 |
Link to this message
|
|
hey, how can i uninstall mobile phone tools?
mee
|
|
wrateman
Newbie
|
6. February 2005 @ 04:38 |
Link to this message
|
|
yeah, me too. I am trying to uninstall the 3.19e I mention above, and going thru Control Panel | Add/Remove Programs I get an error, some convuluted message about empty temporary files, etc.
|
|
xdarahx
Newbie
|
6. February 2005 @ 07:48 |
Link to this message
|
|
that exactly wat happend to me
mee
|
|
vietdude
Newbie
|
6. February 2005 @ 18:56 |
Link to this message
|
|
hi. yes i got exactly the problem as one of the person above describe. I got up until the part where it just keep saying "initializing"....but nothing happen. can someone here help please....
"Everything is data, but data is not everything"
|
|
robone
Newbie
|
6. February 2005 @ 19:25 |
Link to this message
|
|
Sorry to be beating an old horse with stupid quesions, but just got MPT 3, downloaded the USB cable drivers. All good there. Installed MPT, connect the cable and post prior to this mentioned that it would see the cable and ask for drivers. It didn't and I cant get my system to recognize the cable. I've done pretty much everything that is suggested here to no avail.
Is there a way to manually install the USB cable and point my system to see the drivers?
Again, sorry to beat a dead horse.
|
|
Advertisement
|
|
|
|
daev1988
Newbie
|
6. February 2005 @ 22:48 |
Link to this message
|
|
Yes, I think the problem is the USB driver so does anyone know where can we get an USB cable driver?
|
