|
|
|
Burniing error, is it Nero,Shrink or my DVD cdrw
|
|
|
GMcGilbra
Newbie
|
23. May 2007 @ 16:35 |
Link to this message
|
Before last week I had no problems using and successfully copy/burning dvds using DVD-Shrink 3.2 and of coarse it was tied into Nero 6 to burn, but starting last week I can only copy/burn one DVD and then I must reboot my system to start another successfull burn, I had not added any new software or downloads to my PC this just started to be a never ending problem, I've searched all over the net for suggestions and ideas, I've read a few problems in this forum with simular troubles, I've tried the solutions and non haved worked, I have listed all the tried solutions and at the bottom I have copied in my error report.
I've, re-installed my OS, I've added Norton sec 2007, I've changed my Nero drive speed, Ive checked my IDE primary and secondary nothing has changed from previous useage. So if anyone has any other suggestions/solutions for me pleas please fill free to help.
. remember I can burn one dvd when I cut my system on, but it is impossible to do another with out shutting down my computer and cutting it back on...
Here is the burn error report
1A20-0218-0000-2363-4266-6681*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM
Nero API version: 6.6.0.13
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\nero\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 13c
Recorder: <SONY DVD RW DW-Q120A> Version: PYS1 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : ST3500641A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-Q120A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-Q120A atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DW-Q120A D: CDRom0
SONY DVD RW DW-Q120A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522240kB)
Free physical memory: 173MB (178116kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.5.2007
NeroAPI
4:53:14 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
4:53:14 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
4:53:14 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
4:53:14 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
4:53:14 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-Q120A running
4:53:14 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
4:53:14 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
4:53:14 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
4:53:14 PM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
4:53:45 PM #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2259231 (502:03.06, 4412MB)
4:53:45 PM #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO
4:53:45 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DW-Q120A, Media type: DVD-R
Disc Manufacturer: ISSM - R02
Disc Application Code: 64, Disc Physical Code: 193
4:53:45 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
4:53:45 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2259232 (2259232) = #2259232/502:3.7
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2259232 blocks [SONY DVD RW DW-Q120A]
--------------------------------------------------------------
4:53:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DW-Q120A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4626907136, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2259232 | lead-out | 1 | 0x41 | 0x00
4:53:45 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
4:53:45 PM #17 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
4:53:45 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
4:53:45 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)
4:53:45 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:53:45 PM #21 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode
4:53:45 PM #22 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
4:53:45 PM #23 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes
4:53:45 PM #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:54:08 PM #25 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x01710000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
4:54:08 PM #26 CDR -1106 File Writer.cpp, Line 311
Power calibration error
4:54:08 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:54:08 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:54:08 PM #29 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was -1
4:54:08 PM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)
4:54:08 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
4:54:08 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 7:08:02 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 7:07:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 7:08:08 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Car.Mike
AfterDawn Addict
|
23. May 2007 @ 17:25 |
Link to this message
|
GMcGilbra,
Welcome to the forum. Below are the errors and things you need to change
1. Recorder: <SONY DVD RW DW-Q120A> Version: PYS1
You are 2 updates behind. Below is an update site you can use
http://forum.rpc1.org/dl_firmware.php?category=4&manufactor=30
2. You need to use better disks. Try Verbatim or Taiyo Yuden
Disc Manufacturer: ISSM - R02
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
3. You must have Roxio installed. Roxio and Nero do not play correctly so I would suggest that you unistall Roxio totally
File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 7:08:02 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 7:07:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 7:08:08 PM (InCD4 driver for win NT/2K/XP)
4.. Remove you serial number at the top of your post. It is in the log and it starts w/ 1A20
|
|
