|
Help with Installing my Wiikey
|
|
|
hakthis
Newbie
|
1. September 2007 @ 23:27 |
Link to this message
|
hey guys, first post. hope to appear here more often :)
Anyways, I just opened up my wii with no troubles. But when I look at the part where i need to solder my wiikey to, the solder points are differnt to the one of my install guide Install guide im following
Anyways this is what the one in the guide looks like
and this is what mine looks like:
So im really confused whether I can do this. The 3 legs on the d2b board aren't cut and im almost 100% sure my wii is compatible
my wii is a PAL if that helps
can any1 help?
cheers
|
|
Advertisement
|
|
|
|
Newbie
|
2. September 2007 @ 10:22 |
Link to this message
|
|
I have read that d2b is not moddeble at this time. I may be wrong, but I'm about 75% sure. :(
|
Member
|
2. September 2007 @ 11:15 |
Link to this message
|
Originally posted by ch0rx:
I have read that d2b is not moddeble at this time. I may be wrong, but I'm about 75% sure. :(
You're 100% wrong. Only the D2C chipset is unmoddable.
As for the OP, you'll have to solder that point on the wiikey (3) directly to the chips leg.
|
|
hakthis
Newbie
|
3. September 2007 @ 00:01 |
Link to this message
|
|
thanks, but that kinda didn't help with what i needed,
mine is missing number 3 of the points..
cheers
|
|
fredskis
Newbie
|
3. September 2007 @ 03:06 |
Link to this message
|
|
How did that not help? You have to solder it straight onto the chip where the diagram shows the number 3 in red.
|
|
mcsewnab
Junior Member
|
3. September 2007 @ 14:08 |
Link to this message
|
|
There is an alternate solder point for #3 in the picture.
It's one of the legs on the chip.
|
|
hakthis
Newbie
|
3. September 2007 @ 23:23 |
Link to this message
|
|
ohh i see lol
speed readin is baaad
thanks 4 all da help
cheers
|
|
Tigons
Newbie
|
6. September 2007 @ 06:45 |
Link to this message
|
|
Gentlemen,
I've already tried to solder that pin#3 on chip directly exactly the picture indicated. However, the DVD ROM stopped spining right after game disc inserted. I would like to know if someone has made this D2B board modded successfully?
I was thinking to lift up that IC pin and solder directly to that pin. Any good suggestion?
|
|
dryeager
Newbie
|
6. September 2007 @ 08:28 |
Link to this message
|
Originally posted by Tigons:
Gentlemen,
I've already tried to solder that pin#3 on chip directly exactly the picture indicated. However, the DVD ROM stopped spining right after game disc inserted. I would like to know if someone has made this D2B board modded successfully?
I was thinking to lift up that IC pin and solder directly to that pin. Any good suggestion?
I have soldered directly to the IC chip leg before with no problem. Do you have a multimeter? Check your continuity.
|
|
Tigons
Newbie
|
6. September 2007 @ 15:05 |
Link to this message
|
Originally posted by dryeager:
Originally posted by Tigons:
Gentlemen,
I've already tried to solder that pin#3 on chip directly exactly the picture indicated. However, the DVD ROM stopped spining right after game disc inserted. I would like to know if someone has made this D2B board modded successfully?
I was thinking to lift up that IC pin and solder directly to that pin. Any good suggestion?
I have soldered directly to the IC chip leg before with no problem. Do you have a multimeter? Check your continuity.
Continuity is fine. WiiKey is good as well. I was thinking to lift up those #3,4,5,6 pin and solder the wires directly instead. I just need a support to confirm D2B version does work with current Wiikey. I will post here if I get it works.
|
Member
|
6. September 2007 @ 16:57 |
Link to this message
|
|
All D2B boards are fully modable regardless of point configuration.
|
|
Advertisement
|
|
|
|
toofpaste
Newbie
|
30. January 2008 @ 23:27 |
Link to this message
|
hello, im a complete noob at soldering (never soldered once).
Im in the middle of soldering my wii, i have points 1 + 2 +3(alternative) I am planning on doing a longwire install with my d2b US wii. Are there any tips on soldering the Alternatives 6 + 4 + 3?
(especially alternative 3)
|
