|
|
|
really need help, cant find answer anywhere
|
|
|
dimebag07
Junior Member
|
1. October 2007 @ 23:45 |
Link to this message
|
hi all, right for 3 days iv been trying to flash a samsung ms25, i usually hate multiple posts and try to figure stuff out myself, but im at the point where iv even got it at work because im going to burn this bloody thing, and im talking 3 days of streight messing around where i wake up in the mornin and forget what iv done, as far as i know its the mtkflash thats wrong, tried editing etc and on more then one pc, heres what i have
Name VIA SATA RAID Controller
Manufacturer VIA Technologies, Inc.
Status OK
PNP Device ID PCI\VEN_1106&DEV_3149&SUBSYS_D0071631&REV_80\3&13C0B0C5&0&78
I/O Port 0x00009400-0x00009407
I/O Port 0x00009800-0x00009803
I/O Port 0x00009C00-0x00009C07
I/O Port 0x0000A000-0x0000A003
I/O Port 0x0000A400-0x0000A40F
I/O Port 0x0000A800-0x0000A8FF
IRQ Channel IRQ 20
Driver c:\windows\system32\drivers\viamraid.sys (5.1.2600.410, 59.25 KB (60,672 bytes), 06/07/2004 23:45)
if it is an edit can someone please help me out? cant see where im going wrong, i get to the drive select, and it just fails err. userbreak etc because i hit esc when it doesnt do anything, tried xtreme 53 and latest ixtreme, via 8237 tried on 2 pcs usin xmb 5.3 rc3 also treid iprep and wbm 3.x thanks
|
|
Advertisement
|
 |
|
|
|
dimebag07
Junior Member
|
2. October 2007 @ 05:20 |
Link to this message
|
|
please someone help me im desprate trying to get the port errors away when i get ff00 should be 51 etc, always recognises my drive but its not working, feel like my heads gona explode!
|
AfterDawn Addict
|
2. October 2007 @ 06:33 |
Link to this message
|
|
wish i knew how to help you on that one. But just so i know you have tried flashing it but can not get all the way through the process? And i suppose you have already checked to make sure the PC's that you are using have a compatible SATA chipset to be able to flash?
And are you following any specific tutorial on flashing this drive?
This message has been edited since posting. Last time this message was edited on 2. October 2007 @ 06:34
|
|
dimebag07
Junior Member
|
2. October 2007 @ 06:41 |
Link to this message
|
Quote:
wish i knew how to help you on that one. But just so i know you have tried flashing it but can not get all the way through the process? And i suppose you have already checked to make sure the PC's that you are using have a compatible SATA chipset to be able to flash?
And are you following any specific tutorial on flashing this drive?
Quote:
not yet im having trouble reading it, i get into dos and it displays my drivers, via and xtreme, tried both, in sata port 0 and 1, also tried the hex edit but got confused as it had further steps etc, i did the msinfo32 but then the tut said if it doesn't work then do something else with the values but i got lost, when i first got the 'port:should be' error i remember it said port 10: should be 51, so i opened hex edit and found the part i changed to 10 and changed it to 51, but then i got port (something else) should be 51, that was on another chipset though so may not be compatible, this one has same problem i have now its via 8237r plus, not seen loads but people are saying that its compatible, thanks for the reply, hope i can get this to work lol,
|
|
dimebag07
Junior Member
|
2. October 2007 @ 06:44 |
Link to this message
|
|
forgot to say followed the noods guide then went on 360mods and on here. nothing specific just trying to get it to read the code, also i have to press esc after i choose my drive and it also says xxx/xxx/ orig.bin does not exist
|
AfterDawn Addict
|
2. October 2007 @ 06:45 |
Link to this message
|
Try my old tutorial here
http://forums.afterdawn.com/thread_view.cfm/464269
It should work the same way for your VIA chipset. Also, make sure you don't have any more SATA controllers installed in the PC as this wreaks havoc on the "detect I/O" function.
|
Senior Member
|
2. October 2007 @ 06:49 |
Link to this message
|
|
you should make a boot disk with extreme boot maker. if you can't get the i/o numbers through 3.0 or 3.1 can't remeber then get the numbers from xbm rc2, then input the numbers into your 3.0/1 and the create boot disk. if you need more help just pm, i have done tons of sammy's.
MOMO
|
|
dimebag07
Junior Member
|
2. October 2007 @ 06:54 |
Link to this message
|
|
the info of ms32 above was on the scsi tab, on the ide tab i get
Name VIA Bus Master IDE Controller
Manufacturer VIA Technologies, Inc.
Status OK
PNP Device ID PCI\VEN_1106&DEV_0571&SUBSYS_D0071631&REV_06\3&13C0B0C5&0&79
I/O Port 0x0000AC00-0x0000AC0F
Driver c:\windows\system32\drivers\viaide.sys (1.00.01.01, 5.25 KB (5,376 bytes), 10/08/2004 17:57)
Name Primary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&2457056B&0&0
I/O Port 0x000001F0-0x000001F7
I/O Port 0x000003F6-0x000003F6
IRQ Channel IRQ 14
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 03/08/2004 22:59)
Name Secondary IDE Channel
Manufacturer (Standard IDE ATA/ATAPI controllers)
Status OK
PNP Device ID PCIIDE\IDECHANNEL\4&2457056B&0&1
I/O Port 0x00000170-0x00000177
I/O Port 0x00000376-0x00000376
IRQ Channel IRQ 15
Driver c:\windows\system32\drivers\atapi.sys (5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), 93.13 KB (95,360 bytes), 03/08/2004 22:59)
could this cause conflict as its in both? thanks and ill try the tut thanks
|
|
dimebag07
Junior Member
|
2. October 2007 @ 07:21 |
Link to this message
|
|
should i use via on scsi or on ide? theres one on both of the tabs in xbm, also says definitions are not available, thanks
|
AfterDawn Addict
|
2. October 2007 @ 15:59 |
Link to this message
|
|
Don't worry about the definitions not available message. Use the SCSI.
|
|
Advertisement
|
|
|
|
dimebag07
Junior Member
|
3. October 2007 @ 04:23 |
Link to this message
|
ok still no luk, this time i got fail to identify flash type, i dont suppose i should try 10 sec trik? it is an ms25 but i installed a mod360 and got e65 so took it bak out (xbox stil worked) so thinking maybe that tried to flash to ms28? hmm also the sata options are raid and ide however i have to select ide if i dont want raid, any help? thnx
|
|
