|
|
|
Burning Problems All Around
|
|
|
noblman
Inactive
|
9. October 2007 @ 04:48 |
Link to this message
|
Hey there folks. Need a little assistance, if you'd be so kind.
I'm almost at my wit's end here. Been ripping and burning for a few years now without so much as a hiccup with programs such as Clone DVD 2, Any DVD, DVD Shrink, DVD Decrypter & DVD Fab Platinum. Well, all of a sudden I keep getting error messages each and every time it starts to write.
With Clone DVD 2 I keep getting the message "media write error, possibly caused by a bad medium". So I try all types of different media and get the same message with each. And to make matters worse, I get error messages with EVERY program I try including DVD Shrink and DVD Fab Platinum.
I've ran into this before but it never lasted long, which leads me to believe something here is afoul. Burning CDs is never a problem but movies that I've burned before without issue are now giving me... well, issue!
Anyhow, my burner is a Pioneer DVR-105 (Windows), which I've already updated my firmware with. At this point I'm thinking I might just have to invest in another DVD burner but I'm hoping there's another solution.
Any help would be mucho appreciated!
THX!
|
|
Advertisement
|
 |
|
|
Moderator
1 product review
|
9. October 2007 @ 05:02 |
Link to this message
|
Could you post a log from DVDD or Imgburn for us to have a look at.
|
|
noblman
Inactive
|
9. October 2007 @ 08:24 |
Link to this message
|
Thanks for the prompt reply.
Here goes:
DVD Clone 2 says: WriteDVD 10 11 W2 (not sure if that's helpful)
DVD Shrink says: 1C82-0000-19E5-MAAX-4001-0630-****
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.7.5.1
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 7, 5, 1
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 1 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 2 ID 0 DMA: Off
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
MagicISO Virtual DVD-ROM G: CDRom2
MagicISO Virtual DVD-ROM H: CDRom3
JLMS XJ-HD166S I: CDRom0
PIONEER DVD-RW DVR-105 J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1047276kB)
Free physical memory: 529MB (541788kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.10.2007
NeroAPI
12:21:12 PM #1 Phase 112 File APIProgress.cpp, Line 285
DVD-Video files reallocation started
12:21:13 PM #2 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 1309
Required file 'VTS_02_0.VOB' is not present
12:21:13 PM #3 Phase 115 File APIProgress.cpp, Line 285
DVD-Video files reallocation failed
12:21:13 PM #4 Text 0 File NeroAPIBurnFS.cpp, Line 218
Failed to realloc DVD video files
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.47 , size=24960 bytes, created 3/8/2005 9:08:42 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2/1/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hope this helps in some way.
Thanks again!
|
Moderator
1 product review
|
9. October 2007 @ 08:30 |
Link to this message
|
Quote:
Required file 'VTS_02_0.VOB' is not present
Looks like all the copy protection hasn't been removed or cleaned up. Use FixVTS to further scrub your source files and try again.
Quote:
File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.47 , size=24960 bytes, created 3/8/2005 9:08:42 PM
This is Roxio's packet writing software that is known to create conflicts with other burning software. I would suggest removing it using Roxiozap.
|
|
noblman
Inactive
|
10. October 2007 @ 13:47 |
Link to this message
|
|
Well, looks like the removal with Roxiozap did the trick for the time being. Thanks for all of your help. I'll be sure to keep posting if I run into any more trouble.
Thanks again!
|
|
noblman
Inactive
|
15. October 2007 @ 14:27 |
Link to this message
|
Here we go again!
Tried burning a couple of movies recently and am now receiving "power calibration errors" instead of "possibly caused by bad medium."
I'm thinking my burner is on its last legs but am curious if it's something else. I've posted the log DVD shrink gave me the last time I attempted a burn.
1C82-0000-19E5-MAAX-4001-0630-****
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.7.5.1
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 7, 5, 1
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 1 - 7.7.5.1
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
JLMS XJ-HD166S I: CDRom0
PIONEER DVD-RW DVR-105 J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1047276kB)
Free physical memory: 349MB (358200kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.10.2007
NeroAPI
2:15:02 PM #1 Phase 112 File APIProgress.cpp, Line 285
DVD-Video files reallocation started
2:15:02 PM #2 Phase 114 File APIProgress.cpp, Line 285
DVD-Video files reallocation completed (no file modified)
2:15:02 PM #3 Phase 111 File APIProgress.cpp, Line 285
DVD-Video files sorted
2:15:02 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
2:15:02 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:15:02 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)
2:15:02 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3334
First writeable address = 0 (0x00000000)
2:15:02 PM #8 Text 0 File Burncd.cpp, Line 3465
Turn on Disc-At-Once, using DVD media
2:15:03 PM #9 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286175 (508:02.25, 4465MB)
2:15:03 PM #10 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO
2:15:03 PM #11 Text 0 File DlgWaitCD.cpp, Line 2912
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
2:15:03 PM #12 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:15:03 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 823
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [J: PIONEER DVD-RW DVR-105]
--------------------------------------------------------------
2:15:03 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1026
Prepare [J: PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2286176 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2286176 | 0 | 0x00
2286176 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
2:15:03 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:15:03 PM #16 Phase 24 File APIProgress.cpp, Line 285
Caching of files started
2:15:03 PM #17 Text 0 File Burncd.cpp, Line 4298
Cache writing successful.
2:15:03 PM #18 Phase 25 File APIProgress.cpp, Line 285
Caching of files completed
2:15:03 PM #19 Phase 36 File APIProgress.cpp, Line 285
Burn process started at 4x (5,540 KB/s)
2:15:03 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2764
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:15:03 PM #21 Text 0 File DVDR.cpp, Line 3070
Recording mode: Sequential Recording Mode
2:15:03 PM #22 Text 0 File DVDR.cpp, Line 3226
Start write address at LBA 0
DVD high compatibility mode: Yes
2:15:03 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x00db8640: Len x648
2:15:03 PM #24 Text 0 File Cdrdrv.cpp, Line 9285
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:15:05 PM #25 Text 0 File Cdrdrv.cpp, Line 1303
14:15:05.109 - J: PIONEER DVD-RW DVR-105 : Queue again later
2:16:05 PM #26 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0E 00 00 00 00 73 03
Buffer x19220640: Len x10000
0x00 00 01 BA 44 00 4E 7D CC 07 01 89 C3 F8 00 00
0x01 BB 00 12 80 C4 E1 04 E1 7F B9 E0 E8 B8 C0 20
0xBD E0 3A BF E0 02 00 00 01 BF 03 D4 00 00 00 00
2:16:05 PM #27 CDR -1106 File Writer.cpp, Line 301
Power calibration error
J: PIONEER DVD-RW DVR-105
2:16:05 PM #28 Text 0 File DVDR.cpp, Line 3446
EndDAO: Last written address was 767
2:16:05 PM #29 Phase 38 File APIProgress.cpp, Line 285
Burn process failed at 4x (5,540 KB/s)
2:16:05 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.
2:16:05 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.
2:16:05 PM #32 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:16:09 PM #33 Text 0 File Cdrdrv.cpp, Line 10529
DriveLocker: UnLockVolume completed
2:16:09 PM #34 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2/1/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
As always any help would be mucho appreciated.
Thanks again!
|
|
Advertisement
|
|
|
|
JoeRyan
Senior Member
|
15. October 2007 @ 17:10 |
Link to this message
|
The Ritek discs require a lot of laser power because of the dye they use. Your Pioneer is an older model that was superb in its time, but may not have enough power for the new 16X Ritek discs, particularly since a laser diode loses power as it ages. You can always keep the Pioneer as a "DVD-ROM" drive and move up to a newer drive for better success.
|
|
