|
|
|
Slimtype DVDRW SOSW-852s - burn unsuccessful - unspecified target error
|
|
|
garphius
Newbie
|
9. October 2007 @ 06:03 |
Link to this message
|
The original DVDRW in my laptop died, I replaced it with a Slimtype DVDRW SOSW-8252. Now, when I attempt to burn files or any data onto a dvdr-r disc, at the very end of burn, I get the following error message "unspecified target error". The drive can read and play DVD's.
Am using Nero Express 6. DVD's are TDK DVD-R. See Nero log file below. Any help would be greatly appreciated.
4.10.2007
Burn DVD Image
10:09:27 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
10:09:27 PM #2 Text 0 File Writer.cpp, Line 122
Writer Slimtype DVDRW SOSW-852S running
10:09:27 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 344358912
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=37:21.69 ( 168144) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Freds Files\Personal\DVD Burn Image Files\DVD Test Burn 1.nrg>
10:09:27 PM #4 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
10:11:14 PM #5 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 168143 ( 37:21.68, 328MB)
10:11:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
10:11:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
10:11:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
10:11:14 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 168144 (168144) = #168144/37:21.69
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 168144 blocks [Slimtype DVDRW SOSW-852S]
--------------------------------------------------------------
10:11:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 344358912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
168144 | lead-out | 1 | 0x41 | 0x00
10:11:15 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:11:15 PM #12 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
10:11:15 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:11:15 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
10:11:15 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:11:15 PM #16 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode
10:11:15 PM #17 Text 0 File Mmc.cpp, Line 21627
Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON
10:11:15 PM #18 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes
10:11:15 PM #19 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:11:22 PM #20 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06AF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00
10:11:22 PM #21 CDR -400 File Writer.cpp, Line 311
Unspecified target error
10:11:22 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:11:22 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:11:22 PM #24 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was -1
10:11:22 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Owner
1A20-0316-0010-2522-5586-6029
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <Slimtype DVDRW SOSW-852S>Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-852S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (981232kB)
Free physical memory: 459MB (470820kB)
Memory in use : 52
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.10.2007
ISO compilation
10:26:53 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:26:53 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
10:26:53 PM #3 Text 0 File Writer.cpp, Line 122
Writer Slimtype DVDRW SOSW-852S running
10:26:53 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:26:53 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
10:27:23 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 103039 ( 22:53.64, 201MB)
10:27:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
10:27:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
10:27:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
10:27:23 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 103040 (103040) = #103040/22:53.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 103040 blocks [Slimtype DVDRW SOSW-852S]
--------------------------------------------------------------
10:27:23 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 211025920, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
103040 | lead-out | 1 | 0x41 | 0x00
10:27:24 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:27:24 PM #13 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
10:27:24 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:27:24 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
10:27:24 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:27:24 PM #17 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode
10:27:24 PM #18 Text 0 File Mmc.cpp, Line 21627
Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON
10:27:24 PM #19 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes
10:27:24 PM #20 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:27:32 PM #21 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BBD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00
10:27:32 PM #22 CDR -400 File Writer.cpp, Line 311
Unspecified target error
10:27:32 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:27:33 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:27:33 PM #25 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was -1
10:27:33 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Owner
1A20-0316-0010-2522-5586-6029
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <Slimtype DVDRW SOSW-852S>Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-852S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (981232kB)
Free physical memory: 461MB (472536kB)
Memory in use : 51
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.10.2007
ISO compilation
10:28:04 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:28:04 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
10:28:04 PM #3 Text 0 File Writer.cpp, Line 122
Writer Slimtype DVDRW SOSW-852S running
10:28:04 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:28:04 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
10:28:27 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 103039 ( 22:53.64, 201MB)
10:28:27 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
10:28:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
10:28:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
10:28:27 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 103040 (103040) = #103040/22:53.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 103040 blocks [Slimtype DVDRW SOSW-852S]
--------------------------------------------------------------
10:28:27 PM #11 Text 0 File Burncd.cpp, Line 3825
Can only write at 2x (2,770 KB/s) instead of 3x (4,155 KB/s) to current disc.
10:28:27 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 211025920, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
103040 | lead-out | 1 | 0x41 | 0x00
10:28:27 PM #13 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:28:27 PM #14 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
10:28:27 PM #15 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:28:27 PM #16 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
10:28:27 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:28:28 PM #18 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode
10:28:28 PM #19 Text 0 File Mmc.cpp, Line 21627
Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON
10:28:28 PM #20 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes
10:28:28 PM #21 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:28:28 PM #22 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BBE0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00
10:28:28 PM #23 CDR -400 File Writer.cpp, Line 311
Unspecified target error
10:28:28 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:28:28 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:28:29 PM #26 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was -1
10:28:29 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Owner
1A20-0316-0010-2522-5586-6029
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.15
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-852S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (981232kB)
Free physical memory: 545MB (558828kB)
Memory in use : 43
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.10.2007
ISO compilation
10:28:53 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:28:53 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
10:28:53 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:28:53 PM #4 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
10:28:53 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
10:28:53 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 103039 ( 22:53.64, 201MB)
10:28:53 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
10:28:53 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
10:28:53 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:28:53 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 103040 (103040) = #103040/22:53.65
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 103040 blocks [Image Recorder]
--------------------------------------------------------------
10:29:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 211025920, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
103040 | lead-out | 1 | 0x41 | 0x00
10:29:14 PM #12 Phase 65 File dlgbrnst.cpp, Line 1832
Burn process started
10:29:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:29:55 PM #14 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 103040 (19280h), lenght 0 blocks
10:29:55 PM #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:29:55 PM #16 Phase 66 File dlgbrnst.cpp, Line 1832
Burn process completed successfully
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Owner
1A20-0316-0010-2522-5586-6029
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <Slimtype DVDRW SOSW-852S>Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-852S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (981232kB)
Free physical memory: 600MB (615080kB)
Memory in use : 37
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.10.2007
===== Disc-Copy over image - 1st step : Copy to image ...
10:09:24 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
10:09:24 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
10:09:24 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1582208 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
10:09:24 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1582208 = 1582208, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
10:09:24 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
10:09:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1582207 (351:36.07, 3090MB)
10:09:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
10:09:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
10:09:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:09:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1582208 (1582208) = #1582208/351:36.8
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1582208 blocks [Image Recorder]
--------------------------------------------------------------
10:09:25 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3240361984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1582208 | lead-out | 1 | 0x41 | 0x00
10:09:25 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
10:09:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:17:16 PM #14 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 1582208 (182480h), lenght 0 blocks
10:17:16 PM #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:17:17 PM #16 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
10:17:21 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
10:17:21 PM #2 Text 0 File Writer.cpp, Line 122
Writer Slimtype DVDRW SOSW-852S running
10:17:21 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3240361984
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=351:36.08 ( 1582208) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Owner\My Documents\My Videos\TempImage.nrg>
10:17:21 PM #4 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
10:18:22 PM #5 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1582207 (351:36.07, 3090MB)
10:18:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
10:18:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
10:18:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc for simulation.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
10:18:22 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1582208 (1582208) = #1582208/351:36.8
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1582208 blocks [Slimtype DVDRW SOSW-852S]
--------------------------------------------------------------
10:18:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3240361984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1582208 | lead-out | 1 | 0x41 | 0x00
10:18:22 PM #11 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2x (2,770 KB/s)
10:18:22 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:18:22 PM #13 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode
10:18:22 PM #14 Text 0 File Mmc.cpp, Line 21627
Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON
10:18:22 PM #15 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes
10:18:22 PM #16 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:18:27 PM #17 Text 0 File Cdrdrv.cpp, Line 1288
22:18:27.468 - Slimtype DVDRW SOSW-852S\H1 T0 : Queue again later
10:37:56 PM #18 Text 0 File WriterStatus.cpp, Line 116
<Slimtype DVDRW SOSW-852S > start writing Lead-Out at LBA 1582208 (182480h), lenght 0 blocks
10:37:56 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:37:56 PM #20 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was 1582207
10:38:39 PM #21 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Owner
1A20-0316-0010-2522-5586-6029
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/21/2005 1:48:21 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 9/29/2007 12:45:46 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <Slimtype DVDRW SOSW-852S>Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Slimtype DVDRW SOSW-852S >Version: PRS9 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HTS421280H9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
Slimtype DVDRW SOSW-852S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (981232kB)
Free physical memory: 141MB (145052kB)
Memory in use : 85
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.10.2007
===== Disc-Copy over image - 1st step : Copy to image ...
10:40:25 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
10:40:25 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
10:40:25 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 1582208 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
10:40:25 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 1582208 = 1582208, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
10:40:25 PM #5 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
10:40:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1582207 (351:36.07, 3090MB)
10:40:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
10:40:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
10:40:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:40:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1582208 (1582208) = #1582208/351:36.8
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1582208 blocks [Image Recorder]
--------------------------------------------------------------
10:40:25 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3240361984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1582208 | lead-out | 1 | 0x41 | 0x00
10:40:25 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
10:40:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:48:20 PM #14 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 1582208 (182480h), lenght 0 blocks
10:48:20 PM #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:48:20 PM #16 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
10:48:24 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
10:48:24 PM #2 Text 0 File Writer.cpp, Line 122
Writer Slimtype DVDRW SOSW-852S running
10:48:25 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3240361984
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=351:36.08 ( 1582208) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Owner\My Documents\My Videos\TempImage.nrg>
10:48:25 PM #4 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
10:48:59 PM #5 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1582207 (351:36.07, 3090MB)
10:48:59 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
10:48:59 PM #7 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: Slimtype DVDRW SOSW-852S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
10:48:59 PM #8 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
10:48:59 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1582208 (1582208) = #1582208/351:36.8
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1582208 blocks [Slimtype DVDRW SOSW-852S]
--------------------------------------------------------------
10:48:59 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Slimtype DVDRW SOSW-852S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3240361984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1582208 | lead-out | 1 | 0x41 | 0x00
10:49:00 PM #11 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)
10:49:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:49:00 PM #13 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode
10:49:00 PM #14 Text 0 File Mmc.cpp, Line 21627
Set BUFE: SMART-BURN -> ON , Adapt writespeed to disc : ON
10:49:00 PM #15 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes
10:49:00 PM #16 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:49:04 PM #17 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x066A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00
10:49:04 PM #18 CDR -400 File Writer.cpp, Line 311
Unspecified target error
10:49:04 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:49:05 PM #20 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:49:05 PM #21 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was -1
10:49:05 PM #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/11/2004 9:30:18 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/21/2005 1:48:21 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.26a, size=20576 bytes, created 5/13/2005 5:54:10 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Garphius
|
|
