|
|
|
Help! Burner Does Not Burn
|
|
|
chokin2
Newbie
|
10. October 2007 @ 03:01 |
Link to this message
|
Hi y'all,
I've got a serious problem here. My Samsung writemaster (external) does not seem to copy DVD files any longer, ever since a couple of months ago. Funny thing is my burner does play DVDs normally, music (it even burns it), whatever, but it fails when it comes to DVD burning. I don?t know what could have happened but I think I already tried it all: changing blank DVDs brand, updating software (nero + shrink + DVD Region Free+CSS), updating firmware (funny, sometimes while doing this it says the firmware does not correspond to the device, sometimes it says the firmware is the latest version though), burning at a lower speed, trying another burning software (1copyDVDpro), BUT NOTHING, it just won?t go. The problem comes up when I put a blank DVD into the burner, and this is preparing to start burning. This happens no matter whether I previously compressed the files (with the DVDShrink) or just plainly go to for an exact copy of the original DVD. So, to wrap up, it reads, plays, writes (to hard drive), allows compression, but DOES NOT BURN.
I have the two last readouts I got from Nero after the burnings failed. I could email them on request so any of you guys can disentangle them as to get some clue as where to look. I?m just beginning to think that it might be a hardware/firmware thing.
Thanx in advance for your time,
Pablo
|
|
Advertisement
|
|
|
|
|
chokin2
Newbie
|
10. October 2007 @ 03:07 |
Link to this message
|
Below, both logs
***serial removed***
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\UTILITIES\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 25/09/2005 19:11:20
NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.3.1.4
Installed in: C:\UTILITIES\Core\
Application: ahead\Nero - Burning Rom
Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB05 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class:
=== Scsi-Device-Map ===
DiskPeripheral : ST910021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R6112 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R6112 D: CDRom0
TSSTcorp CD/DVDW SH-S182M E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 72351744 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 494MB (506672kB)
Free physical memory: 134MB (138028kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.10.2007
NeroAPI
12:53:30 #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
12:53:30 #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
12:53:30 #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
12:53:30 #4 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
12:53:30 #5 Text 0 File Reader.cpp, Line 124
Reader running
12:53:30 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:53:30 #7 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
12:53:31 #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
12:53:31 #9 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
12:55:33 #10 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
12:55:33 #11 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO
12:55:33 #12 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD-R
Disc Manufacturer: MBI 01 - RG40
Disc Application Code: 64, Disc Physical Code: 193
12:55:33 #13 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD-R DL; DVD+R DL.)
12:55:33 #14 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [E: TSSTcorp CD/DVDW SH-S182M]
--------------------------------------------------------------
12:55:33 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
12:55:33 #16 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:55:34 #17 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
12:55:34 #18 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
12:55:34 #19 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
12:55:34 #20 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 16x (22.160 KB/s)
12:55:34 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:55:34 #22 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode
12:55:34 #23 Text 0 File MMC.cpp, Line 21541
Set BUFE: Super Link -> ON
12:55:34 #24 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes
12:55:34 #25 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:55:52 #26 TRANSFER -25 File Reader.cpp, Line 364
Error reading data
12:55:52 #27 Text 0 File Reader.cpp, Line 367
Exception value: -1
12:55:52 #28 Text 0 File ThreadedTransfer.cpp, Line 234
conversion failed, stopping writers
12:55:52 #29 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was -1
12:55:52 #30 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 16x (22.160 KB/s)
12:55:52 #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
12:55:52 #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 27/07/2006 19:28:33 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 14. October 2007 @ 02:48
|
|
chokin2
Newbie
|
10. October 2007 @ 03:18 |
Link to this message
|
And the other one...
***serial removed***
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\UTILITIES\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 25/09/2005 19:11:20
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB05 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class:
CD-ROM: <TOSHIBA DVD-ROM SD-R6112>Version: 1332 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST910021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R6112 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R6112 D: CDRom0
TSSTcorp CD/DVDW SH-S182M E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 72351744 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 494MB (506672kB)
Free physical memory: 102MB (104668kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.10.2007
UDF/ISO compilation
13:07:38 #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
13:07:38 #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
13:07:38 #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
13:07:38 #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
13:07:38 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
13:07:38 #6 Text 0 File Reader.cpp, Line 124
Reader running
13:07:38 #7 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
13:07:38 #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
13:07:38 #9 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
13:07:39 #10 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
13:07:39 #11 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
13:07:39 #12 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
13:07:39 #13 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:07:39 #14 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [E: TSSTcorp CD/DVDW SH-S182M]
--------------------------------------------------------------
13:07:39 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
13:07:39 #16 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
13:07:39 #17 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
13:07:39 #18 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
13:07:39 #19 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
13:07:39 #20 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 8x (11.080 KB/s)
13:07:39 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x05029200: Len x4000
13:07:39 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
13:07:39 #23 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
13:07:39 #24 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
13:07:52 #25 TRANSFER -25 File Reader.cpp, Line 364
Error reading data
13:07:52 #26 Text 0 File Reader.cpp, Line 367
Exception value: -1
13:07:52 #27 Text 0 File ThreadedTransfer.cpp, Line 234
conversion failed, stopping writers
13:07:53 #28 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
13:07:53 #29 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
13:07:53 #30 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully
13:07:53 #31 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 27/07/2006 19:28:33 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 14. October 2007 @ 02:49
|
|
bigwill68
Suspended permanently
|
13. October 2007 @ 22:21 |
Link to this message
|
Sounds to me you got the nero software installed in the wrong location should in C:\Program Files\Ahead\Nero StartSmart. not in
C:\UTILITIES\Core\ you using the 7.0.0.0 .I use the 6.0.1.8 version ..I believe it is..7 was giving me to much problems check to see if the drive is set (dma)direct memory access not PIO and if your trying to burn disc to disc as..I see you got another dvd rom on your system no nero software will let you do that.You need Transcoder like anydvd or imgburn and clonedvd 2 with anydvd working in the background.I check the specs on your drive and came up with this site
http://www.samsung.com/nl/products/odd/dvdwriters/sh_s182m.asp
you say u got the external this the internal same model.> I got the old Sh--W162c model ..I dont use it no more to burn movies cause upgrade to a Lite-on Lh-18A1P 18x and Benq LS-DW1655 Dont need sammy no more plus it's not a good quality burner..O Well just go back and uninstall that nero and put in your programs file and see if that works and your burner should be your master not the slave on your ide cable change that around two by switching the pin set on the back of the rom's.i should know .I built Computers in my spare time and work on them..try it see whats happen's let me know by a pm.
Done out of Here!
This message has been edited since posting. Last time this message was edited on 13. October 2007 @ 22:23
|
Moderator
1 product review
|
14. October 2007 @ 03:08 |
Link to this message
|
|
|
Advertisement
|
|
|
|
chokin2
Newbie
|
15. October 2007 @ 19:40 |
Link to this message
|
Thank you guys for all your suggestions, but it didnt seem to work.
LOCOENG, I just tried all what you said:
1. Got rid of one of the nero versions (6XXX)
2. Used the nero cleaning tool and then ccleaner
3. Reinstalled nero 7 and relocated to proper folder (progam files)
4. Tried to update nero 7 from the page you gave me but failed (some redundancy error came up, you know why?)
5. Used Verbatims DVDs (ID: MCC) as you mentioned
6. Slowed down burning speed to 12x
Plus, DVDShrink shows no errors at all. The problem turns up solely while burning. Remember that I have a laptop and an external burner (samsung), and this burning problem appeared a couple of months ago with no apparent reason. Below, my last burning log from a failed attempt (which actually got to 12% of the movie burned):
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Archivos de programa\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 25/09/2005 19:11:20
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB05 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class:
CD-ROM: <TOSHIBA DVD-ROM SD-R6112>Version: 1332 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST910021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R6112 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R6112 D: CDRom0
TSSTcorp CD/DVDW SH-S182M E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 72351744 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 494MB (506672kB)
Free physical memory: 59MB (60880kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.10.2007
UDF/ISO compilation
21:59:52 #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
21:59:52 #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
21:59:52 #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
21:59:52 #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
21:59:52 #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
21:59:52 #6 Text 0 File Reader.cpp, Line 124
Reader running
21:59:52 #7 Text 0 File Writer.cpp, Line 113
Writer E: TSSTcorp CD/DVDW SH-S182M running
21:59:52 #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
21:59:52 #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
21:59:52 #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
21:59:53 #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2263823 (503:04.23, 4421MB)
21:59:53 #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
21:59:53 #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
21:59:53 #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:59:53 #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2263824 (2263824) = #2263824/503:4.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263824 blocks [E: TSSTcorp CD/DVDW SH-S182M]
--------------------------------------------------------------
21:59:53 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4636311552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2263824 | lead-out | 1 | 0x41 | 0x00
21:59:53 #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
21:59:54 #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
21:59:54 #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
21:59:54 #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
21:59:54 #21 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 12x (16.620 KB/s)
21:59:54 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x04e6e000: Len x4000
21:59:54 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:59:54 #24 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
21:59:54 #25 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
21:59:54 #26 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
21:59:54 #27 Text 0 File DVDR.cpp, Line 6938
Drive: TSSTcorp CD/DVDW SH-S182M
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
21:59:54 #28 CDR -1207 File DVDR.cpp, Line 5211
Book Type automatically set to: DVD-ROM
21:59:54 #29 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
22:01:39 #30 TRANSFER -25 File Reader.cpp, Line 364
Error reading data
22:01:39 #31 Text 0 File Reader.cpp, Line 367
Exception value: -1
22:01:39 #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
22:02:02 #33 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
22:02:02 #34 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully
22:02:02 #35 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 12x (16.620 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 27/07/2006 19:28:33 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
