|
Stir of Echoes 2 has new protection
|
|
|
ellegon18
Junior Member
|
20. November 2007 @ 13:46 |
Link to this message
|
|
I updated dvdfab to the 11/15/7 updated and no luck. Will have to wait for another update to this great proggy. I did a search of the forums and didnt find a thread on this one so I started one in case some1 else does a search.
I am sorry, I was looking thru several forums and must have posted this in wrong forum, if an admin comes along, please move this to the appropriate forum. Again sorry for the inconvenience.
This message has been edited since posting. Last time this message was edited on 20. November 2007 @ 14:07
|
|
Advertisement
|
 |
|
|
|
ellegon18
Junior Member
|
23. November 2007 @ 18:46 |
Link to this message
|
|
Has anyone had any luck with this movie yet?
|
Senior Member
|
23. November 2007 @ 18:56 |
Link to this message
|
Originally posted by ellegon18:
Has anyone had any luck with this movie yet?[/quote Stir of Echoes: The Homecoming? Try turning off pathplayer.
|
Moderator
|
24. November 2007 @ 04:08 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
ellegon18
Junior Member
|
27. November 2007 @ 09:27 |
Link to this message
|
I tried turning off the pathplayer, but still get error messages, cant rip the movie to hd, will try the fixvts approach.
sorry, been a while since I used vobblanker and fixvts. Thought I could use one of those to rip then cleanup but I guess not.
This message has been edited since posting. Last time this message was edited on 27. November 2007 @ 09:39
|
Senior Member
|
27. November 2007 @ 14:59 |
Link to this message
|
|
Download and install the new 4.0.1.4 Beta version. Try another copy of the movie.
|
Moderator
|
27. November 2007 @ 22:31 |
Link to this message
|
|
there's something not quite right with DVDFab of late, as best as i can tell, a few films lately (old and new) are seemingly having the same issue; unfortunately the DVDFab guys think the problem lies elsewhere ie with non-DVDFab programs but i'm not sure yet, am following a fair few threads closely, both here and at cdfreaks where the program authors live
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 27. November 2007 @ 22:31
|
Senior Member
|
27. November 2007 @ 22:49 |
Link to this message
|
Creaky, I have never had any DVD backup issues while using DVDFAB PLATINUM. All the movies in question have copied problem free on my systems! I have read all the threads, here and elsewhere, about certain movies not backing up with their software. I can only assume since I have not had problems with their software, the problems must be with the individual personal computers.
|
|
redux79
Member
|
27. November 2007 @ 23:53 |
Link to this message
|
This might be a bit off topic, but I had an issue using dvdfab (4.0.1.2) with one of the movies I backed up recently. I ripped only the main movie for "the lookout" with dvdfab. Apparently the macrovision page file overload protection wasn't removed because both nero and shrink gave me the out of memory error. I haven't had to use vobblanker in a while but ran it through any way; sure enough shrink and nero ran just fine after that.
The thread I found that explained the macrovision protection was from 2005. It seems kind of odd that dvdfab wouldn't remove protection that was that old.
|
Senior Member
|
28. November 2007 @ 00:32 |
Link to this message
|
I don't doubt these issues exist, seems reasonable to say there can be some compatibility issues when using a string of programs to perform a task. Welcome to software! LOL
However, since I'm using only DVDFAB PLATINUM, to do it all. May be the reason I'm not running into these issues. I really can't say, since I don't write software programs. Try asking TING the co-author of DVDFAB about your issue. He has a DVDFAB thread at CDFREAKS.com, to deal with any questions about their product.
I ordered a copy of The Outlook. I should have it here by Friday. Will test with DVDFAB Platinum.
This message has been edited since posting. Last time this message was edited on 28. November 2007 @ 05:55
|
AfterDawn Addict
|
28. November 2007 @ 04:38 |
Link to this message
|
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
ellegon18
Junior Member
|
29. November 2007 @ 12:27 |
Link to this message
|
|
Thanks for the replies, I have tried it on 2 different computers, with an older version of dvdfab and the new one, no luck. I prefer to use the free proggies, too cheap I guess to buy the programs, especially since I have not had any problems that couldnt be overcome with free proggies. Any other suggestions?
|
Moderator
|
29. November 2007 @ 16:12 |
Link to this message
|
Originally posted by QuikDraw:
Creaky, I have never had any DVD backup issues while using DVDFAB PLATINUM. All the movies in question have copied problem free on my systems! I have read all the threads, here and elsewhere, about certain movies not backing up with their software. I can only assume since I have not had problems with their software, the problems must be with the individual personal computers.
i'm participating in a thread or 3 over at cdfreaks, some funny goings on with DVD Rebuilder not liking the odd movie processed by DVDFab; i normally have nothing but praise for DVDFab, it's done me proud with countless movies, however if something doesn't seem right i'll just as easily say so :)
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 29. November 2007 @ 16:17
|
Senior Member
|
29. November 2007 @ 17:55 |
Link to this message
|
elegon18
Did you try a different copy of the movie, yet? Are you able to still copy other titles? Next, try removing any trace of DVD DECRYPTER and DVDFAB HD DECRYPTER. First by ADD/REMOVE PROGRAMS, then search HDD, all files and folders, removing any trace from there as well. The reason for this is you may have some corrrupted files fragments left over from previous installations causing the problem. Also, search for and remove PCOUFFIN. Next, install DVDFAB PLATINUM 4.0.1.2, the program is absolutely free for 30 days. This program does it all. http://www.dvdfab.com/download.htm If none of this works, let us know and we can diagnose further.
This message has been edited since posting. Last time this message was edited on 29. November 2007 @ 18:00
|
|
ellegon18
Junior Member
|
29. November 2007 @ 18:35 |
Link to this message
|
|
No I have not been able to exchange the dvd yet, kinda long drive. I did notice that when I updated to the newest version, it didnt replace the original dvdfab, so have both versions on computer. Will uninstall the original dvdfab and try again. Will let you know the results. I also have been reading up on cd freaks site. Pretty technical but sounds like there is a problem, thanks for the heads up, I will keep checking them also.
|
Senior Member
|
29. November 2007 @ 19:01 |
Link to this message
|
|
Yes, I've read many of the same threads. There are a host of reasons why two softwares may not work well on a particular HDD. Driver conflicts and file corruption, are just some. The problem could even be comming from another program sharing the same HDD. Many third party software companies do not certify their software drivers with Microsoft. This opens the door for compatibility issues. I did read some other threads were both author and co-author of DVDFAB said, these problems don't show up in their lab tests. And they believe the problems are elsewhere.
|
AfterDawn Addict
|
30. November 2007 @ 03:28 |
Link to this message
|
|
ellegon18, try the same proccess doing the main title/movie only and see if that works
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
dablur
Newbie
|
17. December 2007 @ 00:39 |
Link to this message
|
|
Yeah wtf its not even showing up on my pc when i put the disk in. Some kind of new protection. Says its scratched or dirty when i try to rip it but its not. I'm gonna keep trying
wait maybe i just have to restart my pc
--blur
This message has been edited since posting. Last time this message was edited on 17. December 2007 @ 04:19
|
Member
|
14. January 2008 @ 23:15 |
Link to this message
|
So did we find a solution of how to get this Stir Of Echoes 2 dvd backuped? Im trying to do it now, and I tried a mixture AnyDVD, Shrink, and DVDFab, but none seem to work! Any ideas of what WORKS???
|
Senior Member
|
15. January 2008 @ 01:05 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 15. January 2008 @ 01:07
|
AfterDawn Addict
|
15. January 2008 @ 01:30 |
Link to this message
|
Originally posted by acorrea4:
So did we find a solution of how to get this Stir Of Echoes 2 dvd backuped? Im trying to do it now, and I tried a mixture AnyDVD, Shrink, and DVDFab, but none seem to work! Any ideas of what WORKS???
what about anydvd with dvd decrypter ripping? do you turn off dvd fab while useing other rippers?
Nothing here to see, move along folks.
 |
Member
|
15. January 2008 @ 18:19 |
Link to this message
|
|
Yea, I tried that methos, and it begins to burn, but about 5 mins. into the burn there is an error, and it doesnt complete! Any other ideas????
|
AfterDawn Addict
|
15. January 2008 @ 18:44 |
Link to this message
|
|
you going disc to disc?
Nothing here to see, move along folks.
|
Member
|
15. January 2008 @ 19:11 |
Link to this message
|
|
no, thats copying everything to the HD
|
|
Advertisement
|
|
|
AfterDawn Addict
|
16. January 2008 @ 01:08 |
Link to this message
|
Originally posted by acorrea4:
no, thats copying everything to the HD
so the files get to HD ok!
do these files load to dvd shrink (just testing structure) ok?
Nothing here to see, move along folks.
|
