|
Trying to rip using Ripit4me (decrypter+Shrink)
|
|
|
talkhard
Junior Member
|
11. December 2007 @ 12:57 |
Link to this message
|
|
I am trying to rip a copy of a dvd using ripit4me which uses decyrpter and then shrink. There is an error during Decrypter and I got a copy of the log here:
W 12:38:40 Drive D:\ (FAT32) does not support single files > 4 GB
I 12:38:40 Initialising SPTI...
I 12:38:40 Searching for SCSI / ATAPI devices...
I 12:38:41 Found 1 DVD±RW!
W 12:38:44 Protected Sectors List Imported Successfully!
W 12:38:44 0 areas have been marked as 'suspect'.
W 12:38:44 Dummy sectors will be inserted where necessary.
I 12:38:45 Operation Started!
I 12:38:45 Source Device: [3:0:0] LITE-ON DVDRW SHW-1635S YS0Z (E:) (ATA)
I 12:38:45 Source Media Type: DVD-ROM
I 12:38:45 Source Media Region Code: 1
I 12:38:45 Source Media Copyright Protection System Type: CSS/CPPM
I 12:38:45 Source Media Implementation Identifier: Daikin U.S. Comtec Lab
I 12:38:45 Destination Folder: C:\THE_BOURNE_ULTIMATUM\
I 12:38:45 File Splitting: By File
I 12:38:45 Detect Mastering Errors: No
I 12:38:45 Multi Angle Processing: No
I 12:38:45 Remove Macrovision Protection: Yes
I 12:38:45 Stream Processing: No
I 12:38:45 Decrypting VTS_01_4.VOB... (LBA: 1637135 - 2161253) - KEY: CA 77 8D F3 EE
E 12:41:27 Failed to read Sector 2063145 - L-EC Uncorrectable Error
E 12:41:27 Failed to decrypt VTS_01_4.VOB!
I 12:41:33 Decrypting VTS_01_5.VOB... (LBA: 2161254 - 2685475) - KEY: CA 77 8D F3 EE
Now, an error window on some kind pops up asking to Abort, Retry or Cancel. Clearly there is an error so I hit Cancel and i try it from the begining again but it still didn't work.
Is there a setting on Decrypter that I am missing, or should I try a different software program?
Any help would be great, thanks.
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
11. December 2007 @ 14:13 |
Link to this message
|
You could try the free version of DVDFab Decrypter 4.0.1.6 beta and then Shrink.
|
|
talkhard
Junior Member
|
11. December 2007 @ 16:08 |
Link to this message
|
|
|
AfterDawn Addict
3 product reviews
|
11. December 2007 @ 17:21 |
Link to this message
|
DvdD hasn't been updated in years.
DvdFab HD Decrypter is constantly updated to work around newer and tougher encryptions. In that aspect, yes it's a better ripper but DvdFab doesn't burn. That's where DvdShrink/ImgBurn combo come into play.
This message has been edited since posting. Last time this message was edited on 11. December 2007 @ 17:22
|
AfterDawn Addict
1 product review
|
11. December 2007 @ 18:20 |
Link to this message
|
|
Talkhard, just got my Bourne Ultimatum (R1) today, backed up no probs with ripit4me 1.7.1.0(last version). You may have a dirty or bad disc.
"The flimsier the product,the higher the price"
Ferengi 82nd rule of aqusition
 |
|
talkhard
Junior Member
|
11. December 2007 @ 20:12 |
Link to this message
|
|
Thanks 7thsinger and iluvendo. Just to be sure, I will get both DvdFab and the latest ripit4me.
Ill let you know
|
AfterDawn Addict
1 product review
|
11. December 2007 @ 20:36 |
Link to this message
|
"The flimsier the product,the higher the price"
Ferengi 82nd rule of aqusition
|
Senior Member
|
11. December 2007 @ 20:56 |
Link to this message
|
talkhard
keep in mind ripit is no longer updated. but it will still do many dvd's.
dvdfab is great for freeware.
anydvd is great if you dont mind paying.
if i were you i would rip dvd to hard drive with dvdfab's lastest vs
if it does not rip its most likely a bad disc.
|
|
talkhard
Junior Member
|
12. December 2007 @ 09:46 |
Link to this message
|
Ok, so i tried ripit4me 1.7.1.0 again and it said that the disc was either dirty or damaged. I cleaned it and it still said it.
I then downloaded and tried DvdFab decrypter 4.0.1.6 and it kinda said the same thing. It mentioned something about it using Pathfinder? Something it does when it encounters a dirty or damaged disc. So, same kinda response as ripit4me.
I am currently trying it again with DVDFab and I will keep you posted.
thanks again
|
|
talkhard
Junior Member
|
12. December 2007 @ 09:51 |
Link to this message
|
|
Ok, so the name of that thing that DVDFab does is called PathPlayer. I know this because it got to almost 50% done and the error window came up saying that DVDFab encountered a reading error which may be caused by copy protection and will employ Pathplayer to remedy this. It also said that it may take longer to open the disc and asks me if I would like to restart it using Pathplayer. I said Yes.
It now started and stopped saying there is a Reading Writing Error Control and asks me to choose either Retry, Abort, Ignore or Ignore All
What do I do? Is it the DVD itself?!?!?!
This message has been edited since posting. Last time this message was edited on 12. December 2007 @ 09:56
|
Senior Member
|
12. December 2007 @ 10:17 |
Link to this message
|
talkhard
it sounds like the dvd is bad.
do you have nero? you can test the disc if you do..
or visit the web site and see if there is a free trail.
http://nero.com
This message has been edited since posting. Last time this message was edited on 12. December 2007 @ 10:23
|
|
talkhard
Junior Member
|
12. December 2007 @ 12:03 |
Link to this message
|
|
Ok, so i went to the store and they let me have another copy. I got back and tried it all again, but to no avail. Nothing works. i tried the Shrink with decrypter, nope. I tried the Fab decrpyter, Nada!
It gives me the same errors at the same time.
I am about to give up!!!!!!!
|
|
mega187
Junior Member
|
12. December 2007 @ 12:21 |
Link to this message
|
You can try anydvd but it costs money though but it is a really good ripping program or try cloneDVD you can use it for 30 days! And also try dvdclone and DVD copy magic!!!! Hope one of these helps!!!!!peace
mega187
|
Senior Member
|
12. December 2007 @ 12:28 |
Link to this message
|
Originally posted by talkhard:
Ok, so the name of that thing that DVDFab does is called PathPlayer. I know this because it got to almost 50% done and the error window came up saying that DVDFab encountered a reading error which may be caused by copy protection and will employ Pathplayer to remedy this. It also said that it may take longer to open the disc and asks me if I would like to restart it using Pathplayer. I said Yes.
It now started and stopped saying there is a Reading Writing Error Control and asks me to choose either Retry, Abort, Ignore or Ignore All
What do I do? Is it the DVD itself?!?!?!
try ingnore all. there should be no reason why dvdfab should not do this dvd.
are you having problem with other dvds reading?
how old is you drive?
|
AfterDawn Addict
3 product reviews
|
12. December 2007 @ 13:22 |
Link to this message
|
|
@Talkhard
I agree with Born2Ride, there's no reason that DvdFab shouldn't be able to hammer this one out. You might want to do the things he metioned and you might want to try and rip/burn an old familiar title just to make sure everything is working properly.
|
|
talkhard
Junior Member
|
12. December 2007 @ 16:11 |
Link to this message
|
|
ok thanks. I will try those things for sure.
I hope your right because there are few things as annoying as trying to get something done that you know should work.
I will let you know.
BTW my DVD drive is, I dunno maybe 3 - 3 1/2 years old. But I know that I "flashed" it about 6 mos ago.
|
AfterDawn Addict
3 product reviews
|
12. December 2007 @ 16:39 |
Link to this message
|
Probably wouldn't be a bad idea to check for an update to the firmware for your burner then.
If you have ImgBurn just go to tools>drive>firmware update.
If you don't have ImgBurn then just go to manufacturer of your burner's website.
This message has been edited since posting. Last time this message was edited on 12. December 2007 @ 16:41
|
|
talkhard
Junior Member
|
13. December 2007 @ 10:45 |
Link to this message
|
Ok, Dvd Decrypter managed to get thru a session on Movie Mode only. In total it came up with 6 VOB files. These are the steps I had to take to get it to burn:
First, while in Decrypter I skipped the stage where it asked me to remove protected cells and a couple of other options because I had tried it previously with those options selected and it came up with some error and stopped the whole process.
Second, I opened up Shrink thinking it could just open the files and burn them. When I tried, it came up with a Cannot find path error, even thou I was showing it where to look, whatever.
Third, I opened it with Nero (I use Nero 7 ultra) and it found the VOB files fine. Then I selected the first file and it asks if you want to perform a merging (I think) of the VOB files. If you select the first one only, it doesnt work. I then went back and highlighted all the VOB files and it asks the same thing. I said Yes. It will take a while, but it gets it done.
Then, the rest is just cosmetics, I choose to create a menu within Nero, but that doesn't matter. The main thing is that I got the movie files and I got them to burn too.
I posted this to try and help some other poor person who might be going thru the same stuff I did.
good luck and thank to everyone who helped me .
This message has been edited since posting. Last time this message was edited on 13. December 2007 @ 10:45
|
|
duane1965
Suspended due to non-functional email address
|
13. December 2007 @ 12:15 |
Link to this message
|
I just bought a new computer with WINDOWS VISTA HOME BASIC. I use RIPIT4ME, DVDECRYPTER, DVDSHRINK and NERO 8 ULTRA. They all work fine together. I burned a few DVD MOVIES and they came out fine. I download NERO 8 ULTRA from NERO.COM and got a the KEY from underground website. If you need any help. Email me, I will help you. My email address is: DuaneAdrian1965@Yahoo.com
This message has been edited since posting. Last time this message was edited on 13. December 2007 @ 12:18
|
Senior Member
|
13. December 2007 @ 12:26 |
Link to this message
|
|
talkhard
if your using nero7 are you using recode? sound like your doing to many steps
|
|
Advertisement
|
|
|
Moderator
|
13. December 2007 @ 14:39 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
