|
|
|
Problem burning DVDs Discs
|
|
|
Sythron
Member
|
28. December 2007 @ 11:27 |
Link to this message
|
I've searched the forums and found similar threads and I think my firmware is outdated. I was able to burn discs fine 2 days ago but I bought a new batch of Memorex DVD-Rs and it always says illegal disc when I try and burn something.
I am not sure what to do, I read about the firmware and how it can kill your drive and I just want to make sure I am doing everything right. The computer I am burning the stuff off of is pretty old (like 05), here is what Nero says about my drive:
LITE-ON DVD-RW SOHW-1633S
After I start to burn the disc the files get cached and then it says illegal disc. How do I view any kind of log? I cannot seem to locate my Nero History.
PLEASE HELP.
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
1 product review
|
28. December 2007 @ 11:51 |
Link to this message
|
Which version of Nero are you using?
Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt
Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.txt
Most likely it seems that your burner does not like the media you are using. A firmware update could fix that, but you made a poor choice of discs.
Post the error log(make sure you don't post your serial number).
http://my.afterdawn.com/locoeng/blog_entry.cfm/385
This message has been edited since posting. Last time this message was edited on 28. December 2007 @ 11:55
|
|
Sythron
Member
|
28. December 2007 @ 12:34 |
Link to this message
|
I am using Nero Express 6, thanks a lot for the link, here is my history:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-ROM GCR-8483B>Version: 1.00 - HA 4 TA 1 - 6.3.1.17
Adapter driver: <atapi> HA 4
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 4 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8483B atapi Port 4 ID 1 DMA: Off
DiskPeripheral : WDC WD1600BB-22GUA0 atapi Port 5 ID 0 DMA: On
CdRomPeripheral : IJ6858Y LOO046A 1.0 a4xdi32k Port 6 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1633S E: CDRom0
HL-DT-ST CD-ROM GCR-8483 F: CDRom1
IJ6858Y LOO046A K: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 22MB (23048kB)
Memory in use : 94 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.12.2007
ISO compilation
6:29:07 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
6:29:07 PM #2 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x037F5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
6:29:07 PM #3 Text 0 File Reader.cpp, Line 118
Reader running
6:29:07 PM #4 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1633S running
6:29:07 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
6:29:07 PM #6 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
6:29:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2272207 (504:56.07, 4437MB)
6:29:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
6:29:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
6:29:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:29:07 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2272208 (2272208) = #2272208/504:56.8
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2272208 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
6:29:07 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4653481984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2272208 | lead-out | 1 | 0x00 | 0x41
6:29:07 PM #13 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
6:29:10 PM #14 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
6:29:10 PM #15 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
6:29:10 PM #16 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 8x (11,080 KB/s)
6:29:10 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:29:10 PM #18 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 7:05,127 (425127ms) -> OK
6:29:10 PM #19 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode
6:29:10 PM #20 Text 0 File Mmc.cpp, Line 20394
Set BUFE: supported -> ON , SMART-BURN : ON
6:29:10 PM #21 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes
6:29:10 PM #22 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:29:10 PM #23 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x09D04000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
6:29:42 PM #24 Text 0 File Cdrdrv.cpp, Line 1294
18:29:42.421 - LITE-ON DVDRW SOHW-1633S\H4 T0 : Queue again later
6:39:58 PM #25 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2272208 (22ABD0h), lenght 0 blocks
6:39:59 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:39:59 PM #27 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 2272207
6:40:17 PM #28 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x09D04000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
6:40:17 PM #29 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
6:40:17 PM #30 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
6:40:17 PM #31 Phase 37 File dlgbrnst.cpp, Line 1845
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/7/2007 6:51:00 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 6:51:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
3 product reviews
|
28. December 2007 @ 13:27 |
Link to this message
|
Quote:
<LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 4 TA 0 - 6.3.1.17
Check firmware for latest version. Visit manufacturer's site, look up burner specific number.
Quote:
Physical memory : 382MB (391664kB)
Free physical memory: 22MB (23048kB)
Memory in use : 94 %
Way too much going on here. The object is to keep as much memory free as you can while burning. In other words, don't multitask, surf, etc while burning.
Quote:
Disc Manufacturer: RITEKG - 05
Not real good blank media to use. Try MIJ Taiyo Yuden, Verbatim, or Sony.
Quote:
6:29:10 PM #16 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 8x (11,080 KB/s)
8x is the max i would burn, slowing down to 4x or 6x wouldn't hurt a thing.
|
AfterDawn Addict
1 product review
|
28. December 2007 @ 13:48 |
Link to this message
|
I was just righting the whole thing that 7thsinger did but he beat me to it:)
I just want to also suggest removing Roxio, it conflicts with Nero
Quote:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/7/2007 6:51:00 PM
First manually uninstall Roxio and then run Roxio Zapper to remove all the traces of it from your computer.
http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
|
|
Sythron
Member
|
28. December 2007 @ 14:00 |
Link to this message
|
|
Thanks a lot guys I'll do everything you said.
Unfortunately those were the discs that I have and my only blank ones. I am just burning some stuff to pass on to a friend like a data DVD so it shouldn't be too bad to use it right?
I'll get back to you with the info on my firmware on the drive.
Thanks again!
|
AfterDawn Addict
3 product reviews
|
28. December 2007 @ 14:40 |
Link to this message
|
Originally posted by cyprusrom:
I was just righting the whole thing that 7thsinger did but he beat me to it:)
I just want to also suggest removing Roxio, it conflicts with Nero
Quote:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/7/2007 6:51:00 PM
First manually uninstall Roxio and then run Roxio Zapper to remove all the traces of it from your computer.
http://www.softpedia.com/get/Tweak/Unins...p.shtml
Sorry Cyprusrom...i'll type slower next time. ;)
@sythron
Upgrade to better blank media asap. You won't be sorry.
This message has been edited since posting. Last time this message was edited on 28. December 2007 @ 14:41
|
AfterDawn Addict
1 product review
|
28. December 2007 @ 14:57 |
Link to this message
|
@singer
Quote:
Sorry Cyprusrom...i'll type slower next time. ;)
Nah, it's all good! I am retiring soon!
@Sythron
As for the media, if you have an OfficeMax close by, they have Verbatim on sale, 100 for $25. The sale I think is through the 29th.
|
|
Sythron
Member
|
28. December 2007 @ 16:19 |
Link to this message
|
I am in Canada, and at all the BestBuys and WalMarts it's Memorex on sale... sucks! I can buy a 100 Sony pack but it's 29.99 compared to the 100 pack of Memorex which is 17.99
I'll see if I can exchange them at my WalMart.
PS: Still trying to check my drive out lol...
And please don't retire!
|
Moderator
1 product review
|
28. December 2007 @ 16:53 |
Link to this message
|
|
If you have Sears in Canada look for the Sony's with Made In Japan on the label, they should be Taiyo Yuden...excellent stuff.
|
|
Sythron
Member
|
28. December 2007 @ 20:48 |
Link to this message
|
Thanks, I have a Sears kinda near by, I'll write down that name and be sure to buy those ones for my higher quality stuff like DVDs and Games.
I cannot find anything on my optical drive that I can understand. I found a few sites with stuff on the 1633S but I didn't get any of it. Can anyone help me? Apparently there are third party manufacturers for this drive and I have no idea where to go to get the firmware for an upgrade.
I also read that my drive will not read 16X DVD-R which is what the discs I have, currently are.
|
Moderator
1 product review
|
28. December 2007 @ 21:07 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 28. December 2007 @ 21:10
|
|
Sythron
Member
|
29. December 2007 @ 10:47 |
Link to this message
|
This computer that the stuff is on is like a 2005 eMachines computer.
Thanks for the link, I read some stuff on that site about my drive but I didn't see that one, so which firmware out of the five listed here:
http://codeguys.rpc1.org/firmwares.html#SOHW-1653S
should I flash to my drive?
Thanks again for all the help!
|
|
mackdl
Senior Member
|
29. December 2007 @ 11:18 |
Link to this message
|
|
This message has been edited since posting. Last time this message was edited on 29. December 2007 @ 11:39
|
Moderator
1 product review
|
30. December 2007 @ 09:39 |
Link to this message
|
|
|
Advertisement
|
|
|
AfterDawn Addict
|
30. December 2007 @ 13:00 |
Link to this message
|
Quote:
--------------------------------------------------------------------------------
Disc Manufacturer: RITEKG - 05
--------------------------------------------------------------------------------
used thousands literally odd couple coaster my fault and maybe 1 or 2 bad but all the rest which is a shed load trust me all good!
-------------------------------
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2272207 (504:56.07, 4437MB)
burning close to outer edge make project size smaller
Nothing here to see, move along folks.
 This message has been edited since posting. Last time this message was edited on 30. December 2007 @ 13:02
|
|
