|
|
|
Please Help with burning DVD+R and DVD-R with Nero
|
|
Newbie
|
8. January 2008 @ 19:06 |
Link to this message
|
I have Driver HL-DT-ST DVDRRW GWA-4164B
On my Nero Program the following Recorders show up:
Image Recorder (DVD)
Image Recorder CD-R/RW
HL-DT-ST DVD RRW GWA 4164B DVD
HL-DT-ST DVD RRW GWA 4164B CR-R/RW
I can not make a Data DVD, either DVD+R or DVD-R.
I am able to make a CD-R or CD-R/W.
I was told that DVD's have a greater capacity and have bought many DVD+R and DVD-R to find out that they do not work.
When I burn these DVD's with Nero Express I get a window asking to insert the disc to be written on: Disk Requirements: DVD+R/RW, DVD-R/RW, DVD+R9, Double Layer.
When I insertet a DVR+R the burn session failed at 16.620KB's.
When I put a DVR-R in the CD-ROM the shute opens to eject the disk.
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
8. January 2008 @ 19:16 |
Link to this message
|
Go to one of these locations and find your Nero history log, post it so we can take a look
Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt
Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory
VISTA: ?. Desktop/Your Comp Name/App Data/Roaming/Ahead/Nero History
|
Newbie
|
8. January 2008 @ 19:30 |
Link to this message
|
Originally posted by gwendolin:
Go to one of these locations and find your Nero history log, post it so we can take a look
Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt
Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory
VISTA: ?. Desktop/Your Comp Name/App Data/Roaming/Ahead/Nero History
|
Newbie
|
8. January 2008 @ 19:36 |
Link to this message
|
Gwendolin, I am sorry I am trying hard here, but not sure how I can reply, hope this is correct.
You instructed me to go to my Programm Files and I only have All Programs.Under All Programs I have Nero Program, Back-Up, CD-DVD Speed, Cover Des., Nero Drive Speed, Nero Express, Nero Information. I do not see anything about History.
Elly
|
AfterDawn Addict
|
8. January 2008 @ 19:51 |
Link to this message
|
Which version of Nero are you using.
BTW: I am logging off for a few hours, hopefully someone will come along and help, good luck.
This message has been edited since posting. Last time this message was edited on 8. January 2008 @ 19:54
|
Newbie
|
8. January 2008 @ 20:34 |
Link to this message
|
Originally posted by gwendolin:
Which version of Nero are you using.
BTW: I am logging off for a few hours, hopefully someone will come along and help, good luck.
|
Newbie
|
8. January 2008 @ 20:37 |
Link to this message
|
I found the Nero History Log now, however it is many pages long and I do not know how to forward to you. Can you please advise.
Thanks Elly
This message has been edited since posting. Last time this message was edited on 8. January 2008 @ 20:48
|
AfterDawn Addict
3 product reviews
|
8. January 2008 @ 20:40 |
Link to this message
|
|
Do what Gwendolin suggested and try to post a log on here and we'll see if we can help you.
|
Newbie
|
8. January 2008 @ 20:53 |
Link to this message
|
|
I found the history log but I do not know how to post the log here. I looked for the Help on your Forum but can not find it. Can you please advise me how I can get the history to you. Thank you and I apologize for being so uninformed.
Elly
|
AfterDawn Addict
3 product reviews
|
8. January 2008 @ 21:00 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 8. January 2008 @ 21:02
|
Newbie
|
8. January 2008 @ 21:16 |
Link to this message
|
Attached is the Nero History Log. Hope you can help me!
Thankful for ever
Elly
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 124MB (127016kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.1.2008
ISO compilation
12:07:19 AM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:07:19 AM #2 Text 0 File Reader.cpp, Line 118
Reader running
12:07:19 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:07:19 AM #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
12:08:57 AM #5 Phase 40 File dlgbrnst.cpp, Line 1845
Aborted by user
12:08:57 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
12:08:57 AM #7 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRRW GWA-4164B
Medium not present
12:08:57 AM #8 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Owner
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 123MB (126384kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.1.2008
ISO compilation
12:10:40 AM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:10:40 AM #2 Text 0 File Reader.cpp, Line 118
Reader running
12:10:40 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:10:40 AM #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
12:10:47 AM #5 Phase 40 File dlgbrnst.cpp, Line 1845
Aborted by user
12:10:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
12:10:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRRW GWA-4164B
Medium not present
12:10:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Owner
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 187MB (191756kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.1.2008
ISO compilation
12:46:25 AM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:46:25 AM #2 Text 0 File Reader.cpp, Line 118
Reader running
12:46:25 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:46:25 AM #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
12:47:01 AM #5 Phase 40 File dlgbrnst.cpp, Line 1845
Aborted by user
12:47:01 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
12:47:01 AM #7 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRRW GWA-4164B
Medium not present
12:47:01 AM #8 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Owner
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 144MB (147896kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.1.2008
ISO compilation
1:50:13 AM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:50:13 AM #2 Text 0 File Reader.cpp, Line 118
Reader running
1:50:13 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
1:50:13 AM #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
1:50:28 AM #5 Phase 40 File dlgbrnst.cpp, Line 1845
Aborted by user
1:50:28 AM #6 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
1:50:28 AM #7 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRRW GWA-4164B
Medium not present
1:50:28 AM #8 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Owner
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 89MB (91480kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.1.2008
ISO compilation
4:22:56 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
4:22:56 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
4:22:56 PM #3 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRRW GWA-4164B running
4:22:56 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
4:22:57 PM #5 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
4:22:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 66799 ( 14:50.49, 130MB)
4:22:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
4:22:57 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7
4:22:57 PM #9 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:22:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 66800 (66800) = #66800/14:50.50
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 66800 blocks [HL-DT-ST DVDRRW GWA-4164B]
--------------------------------------------------------------
4:24:20 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HL-DT-ST DVDRRW GWA-4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 136806400, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
66800 | lead-out | 1 | 0x00 | 0x41
4:24:20 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
4:24:20 PM #13 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
4:24:20 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
4:24:20 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 16x (22,160 KB/s)
4:24:20 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:24:21 PM #17 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
4:24:21 PM #18 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:17,867 (17867ms) -> OK
4:24:21 PM #19 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: No
4:25:38 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x094C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80
4:25:38 PM #21 CDR -1135 File Writer.cpp, Line 304
Write error
4:25:38 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:25:38 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
4:25:39 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
4:25:39 PM #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
4:25:39 PM #26 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Owner
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 144MB (147856kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.1.2008
ISO compilation
4:40:46 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
4:40:46 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
4:40:46 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
4:40:46 PM #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
4:40:46 PM #5 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 66799 ( 14:50.49, 130MB)
4:40:46 PM #6 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
4:40:46 PM #7 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R
Disc Manufacturer ID: , Media Type ID: , Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
4:40:46 PM #8 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:40:46 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 66800 (66800) = #66800/14:50.50
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 66800 blocks [HL-DT-ST DVDRRW GWA-4164B]
--------------------------------------------------------------
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Owner
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM
Nero version: 6.3.1.17 (Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 4
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164 E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 128MB (131328kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.1.2008
ISO compilation
4:44:36 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
4:44:36 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
4:44:36 PM #3 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRRW GWA-4164B running
4:44:36 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
4:44:36 PM #5 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
4:44:36 PM #6 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 15295 ( 3:23.70, 29MB)
4:44:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO (enabled: CD)
4:44:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7
4:44:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:44:36 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 15296 (15296) = #15296/3:23.71
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 15296 blocks [HL-DT-ST DVDRRW GWA-4164B]
--------------------------------------------------------------
4:45:08 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HL-DT-ST DVDRRW GWA-4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 31326208, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
15296 | lead-out | 1 | 0x00 | 0x41
4:45:08 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
4:45:09 PM #13 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
4:45:09 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
4:45:09 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 12x (16,620 KB/s)
4:45:09 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:45:09 PM #17 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
4:45:09 PM #18 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:15,959 (15959ms) -> OK
4:45:09 PM #19 Text 0 File DVDPlusRW.cpp, Line 613
Start write address at LBA 0
DVD high compatibility mode: No
4:46:50 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x09320000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80
4:46:50 PM #21 CDR -1135 File Writer.cpp, Line 304
Write error
4:46:50 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:46:50 PM #23 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
4:46:50 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
4:46:50 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 12x (16,620 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Owner
Windows XP 5.1
This message has been edited since posting. Last time this message was edited on 8. January 2008 @ 23:14
|
AfterDawn Addict
|
8. January 2008 @ 22:22 |
Link to this message
|
|
Senior Member
|
8. January 2008 @ 22:39 |
Link to this message
|
Quote:
Physical memory : 382MB (391664kB)
Free physical memory: 128MB (131328kB)
Not to intrude, but memory seems low.
Quote:
1A20-0316-0010-1205-more-numbers-here
Edit out your serial number before someone cuts and pastes it into their own computer, or posts it on one of the serial number sites.
There are numerous times it shows up in your log, (at least 6) Use the find function of your browser to get each instance, search for 1A20 and edit them out.
This message has been edited since posting. Last time this message was edited on 8. January 2008 @ 22:41
|
Newbie
|
8. January 2008 @ 22:52 |
Link to this message
|
Thank you so much. I will follow your advice but need some more explanation.
1. I will update to version 6.6.1.15 with the link you have provided
2. How do I turn the CdRomPeripheral: HL-DT-ST DVDRRW GWA 4164B atap Port 4 DMA: Off? Where do I find it?
3. Where do I find the DMA to turn off?
4. Quote: Disc. Manufacturer ID:MBIPG101, Media Type ID: RO5, Product revision number:1 Are these the disks I have used and I should use Verbatim or Sony (made in Japan) in future?
Quote: Recorder:<HL-DT-ST DVDRRW GWA-4164> Version:1.03 What do you mean by that?
5. I will update the firmware from the link provided by you.
6. What do you mean by slow your burn to 4 speed? Is that after I done the update etc. and how do I do that?
Gwendolin, also in what order should I do those suggested things? Should I do them in the order you listed them?
Thank you again for your prompt reply.
Elly
|
AfterDawn Addict
|
8. January 2008 @ 23:47 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 8. January 2008 @ 23:48
|
Newbie
|
9. January 2008 @ 00:16 |
Link to this message
|
Thank you again.
I did not realize that I only have to click on the links. I have now downloaded the firmware from fuijitsu-siemens (link 1) and received a window with 2 files/folders in the temporary file, which in the meantime I can not find. Do you think the firmware installed? I did not save it I ran it.
I also have opened the link from "Alkohol" but it seems the first picture does not show. There is a red X for the first picture.
Gwendolin, how do I reduce the burn speed to 4?
I also looked at the update to version 6.6.1.15 and it says: Nero is a flexible, reliable, and easy-to-use application designed to write both data and CD audio to CD-R and CD-RW discs. It supports ISO 9660 image... more info...
Would this update allow me to burn my Data and Pictures on a DVD+ and DVD+RW? Above it only mentions CD's?
You people are extremley helpful and I appreciate your help and consideration. Thank you Gwendolin.
|
AfterDawn Addict
|
9. January 2008 @ 01:45 |
Link to this message
|
Yes this version will allow you to burn both DVDs and CDs....it's a little hard to describe how to reduce your burn speed as it depends on which particular application of Nero you are using....heres a pic ...but I am using Nero 7 and the application is NeroVision
|
Newbie
|
9. January 2008 @ 02:05 |
Link to this message
|
Thank you. Can I change the speed after I download the updates to Nero 6.6.1.15.
I used Alkohols Guide re: DMA needs to be off and have discovered that I have 3 of each Primary IDE Channel and Secondary DE Channel. Should I uninstall 2 of them each. Actually one of them in the Seconday catergory has PIO Mode and needs to be uninstalled, I think, anyway.
I downloaded the firmware but do not know if it is in effect. How can I verify? I think I am getting paranoid now. All I know is, after the download I got a screen up Tem;. Folder with 2 files, and I am not sure if I should have installed from there. Can you please explain to me what I should do.
Elly
|
AfterDawn Addict
|
9. January 2008 @ 02:08 |
Link to this message
|
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 15295 ( 3:23.70, 29MB)
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 66799 ( 14:50.49, 130MB)
3 and 14 minutes of video to dvdr? you have many logs
uninstall all device controllers then and reboot pc, then check dma
is this a made up pc built by you? or untouched shop bought one?
cant see any files locations? like c:\movie files\matrix.avi - bla bla
Nothing here to see, move along folks.
 This message has been edited since posting. Last time this message was edited on 9. January 2008 @ 02:28
|
Senior Member
|
14. January 2008 @ 21:45 |
Link to this message
|
I just saw your post in my shoutbox, sorry don't look there much,
As far as physical memory goes, this is the amount of memory in your system, Nero recommends at least 512 Mbytes for burning, if you are multitasking, (I.E. surfing the net, having other programs open etc.) while you are burning this will also eat up a lot of your free memory.
two options,
1. buy more memory, I suggest Newegg.com
or
2. don't multitask and close down any open programs that aren't necessary to run your computer, disconnect from the net, turn off your anti virus and spyware programs, (only after disconnected from the net) Use Windows Task Manager to shut down unneeded programs. This should help out a bit.
|
Newbie
|
14. January 2008 @ 23:13 |
Link to this message
|
|
Thanks for your advise. I will try your suggestions. Actually I was able to burn a DVD only once 2 days ago. I did everything what was suggested to me and I was able to burn the DVD and unfortunately I do not remember if I had other programms running but I don't think so. I will try it again. The only thing is, I could not read the DVD afterwards. It kept ejecting from my CD Rom. Any suggestions?
How do I buy more space? Can I do that by ordering and than downloading from the link you gave me?
Thank you again, I would have replied directly to you rather than through your shoutbox but I did not have a reply button on the message because someone replied to my message after you.
Elly
|
AfterDawn Addict
|
15. January 2008 @ 01:22 |
Link to this message
|
do you have the nero log from that file that burnt ok and doesnt play in your stand alone player?
Nothing here to see, move along folks.
|
Newbie
|
15. January 2008 @ 02:15 |
Link to this message
|
Attached is the History File. It was on January 13/08 that I finally was able to burn a DVD successfully but could not read it. As a matter there was no indication that I had a disk in the CD Rom Drive. Thank you for your help.
Can I delete these history files after they served its purpose?
Elly Huhle
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: On
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164B E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 82MB (84968kB)
Memory in use : 78
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.1.2008
ISO compilation
11:43:53 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:43:53 PM #2 Text 0 File Isodoc.cpp, Line 6494
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:43:54 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:43:54 PM #4 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
11:44:15 PM #5 Phase 40 File dlgbrnst.cpp, Line 1685
Aborted by user
11:44:15 PM #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
11:44:15 PM #7 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVDRRW GWA-4164B
Medium not present
11:44:15 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.)
11:44:15 PM #9 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Elly Huhle
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: On
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164B E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 82MB (84264kB)
Memory in use : 78
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.1.2008
ISO compilation
11:46:23 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:46:23 PM #2 Text 0 File Isodoc.cpp, Line 6494
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:46:23 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:46:23 PM #4 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
11:46:30 PM #5 Phase 40 File dlgbrnst.cpp, Line 1685
Aborted by user
11:46:31 PM #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
11:46:31 PM #7 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVDRRW GWA-4164B
Medium not present
11:46:31 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.)
11:46:31 PM #9 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Elly Huhle
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: On
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164B E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 79MB (81428kB)
Memory in use : 79
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.1.2008
ISO compilation
11:48:58 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:48:58 PM #2 Text 0 File Isodoc.cpp, Line 6494
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:48:58 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:48:58 PM #4 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
11:49:05 PM #5 Phase 40 File dlgbrnst.cpp, Line 1685
Aborted by user
11:49:06 PM #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
11:49:06 PM #7 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVDRRW GWA-4164B
Medium not present
11:49:06 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.)
11:49:06 PM #9 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Elly Huhle
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: On
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164B E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 178MB (182292kB)
Memory in use : 53
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.1.2008
ISO compilation
11:51:34 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:51:34 PM #2 Text 0 File Isodoc.cpp, Line 6494
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:51:34 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:51:35 PM #4 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
11:51:35 PM #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 70335 ( 15:37.60, 137MB)
11:51:35 PM #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
11:51:35 PM #7 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7
11:51:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:51:35 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 70336 (70336) = #70336/15:37.61
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 70336 blocks [HL-DT-ST DVDRRW GWA-4164B]
--------------------------------------------------------------
11:51:35 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVDRRW GWA-4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 144048128, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
70336 | lead-out | 1 | 0x41 | 0x00
11:51:35 PM #11 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:51:35 PM #12 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
11:51:38 PM #13 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
11:51:38 PM #14 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
11:51:38 PM #15 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
11:51:38 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:51:38 PM #17 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:51:38 PM #18 Text 0 File DVDR.cpp, Line 5715
Drive: HL-DT-ST DVDRRW GWA-4164B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
11:51:38 PM #19 CDR -1207 File DVDR.cpp, Line 5645
Book Type automatically set to: DVD-ROM
11:51:38 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x075a13c0: Len x648
11:51:38 PM #21 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No
11:57:43 PM #22 Phase 40 File dlgbrnst.cpp, Line 1372
Aborted by user
11:58:51 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x07880040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11:58:51 PM #24 CDR -1135 File Writer.cpp, Line 281
Write error
E: HL-DT-ST DVDRRW GWA-4164B
11:58:52 PM #25 Phase 39 File dlgbrnst.cpp, Line 1685
Burn process aborted
11:58:52 PM #26 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:59:00 PM #27 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
11:59:00 PM #28 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Elly Huhle
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: On
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164B E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 167MB (171464kB)
Memory in use : 56
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.1.2008
ISO compilation
12:02:09 AM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:02:09 AM #2 Text 0 File Isodoc.cpp, Line 6494
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:02:09 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:02:09 AM #4 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
12:02:09 AM #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 87951 ( 19:32.51, 171MB)
12:02:09 AM #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
12:02:09 AM #7 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7
12:02:09 AM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:02:09 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 87952 (87952) = #87952/19:32.52
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 87952 blocks [HL-DT-ST DVDRRW GWA-4164B]
--------------------------------------------------------------
12:02:09 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVDRRW GWA-4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 180125696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
87952 | lead-out | 1 | 0x41 | 0x00
12:02:09 AM #11 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:02:09 AM #12 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
12:02:12 AM #13 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
12:02:12 AM #14 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
12:02:12 AM #15 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)
12:02:12 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:02:12 AM #17 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:02:12 AM #18 Text 0 File DVDR.cpp, Line 5715
Drive: HL-DT-ST DVDRRW GWA-4164B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
12:02:12 AM #19 CDR -1207 File DVDR.cpp, Line 5645
Book Type automatically set to: DVD-ROM
12:02:12 AM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x075b13c0: Len x648
12:02:12 AM #21 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No
12:02:25 AM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x07890040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
12:02:25 AM #23 CDR -1135 File Writer.cpp, Line 281
Write error
E: HL-DT-ST DVDRRW GWA-4164B
12:02:26 AM #24 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)
12:02:26 AM #25 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:02:33 AM #26 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
12:02:33 AM #27 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Elly Huhle
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: On
DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4164B E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 161MB (165480kB)
Memory in use : 57
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.1.2008
ISO compilation
12:03:45 AM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:03:45 AM #2 Text 0 File Isodoc.cpp, Line 6494
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
12:03:45 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:03:45 AM #4 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
12:03:45 AM #5 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 70319 ( 15:37.44, 137MB)
12:03:45 AM #6 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
12:03:45 AM #7 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7
12:03:45 AM #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:03:45 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 70320 (70320) = #70320/15:37.45
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 70320 blocks [HL-DT-ST DVDRRW GWA-4164B]
--------------------------------------------------------------
12:03:45 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVDRRW GWA-4164B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 144015360, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
70320 | lead-out | 1 | 0x41 | 0x00
12:03:45 AM #11 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:03:45 AM #12 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
12:03:45 AM #13 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
12:03:45 AM #14 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
12:03:45 AM #15 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 8x (11,080 KB/s)
12:03:45 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:03:45 AM #17 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:03:45 AM #18 Text 0 File DVDR.cpp, Line 5715
Drive: HL-DT-ST DVDRRW GWA-4164B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
12:03:45 AM #19 CDR -1207 File DVDR.cpp, Line 5645
Book Type automatically set to: DVD-ROM
12:03:45 AM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x074b13c0: Len x648
12:03:45 AM #21 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No
12:04:57 AM #22 Text 0 File WriterStatus.cpp, Line 113
<HL-DT-ST DVDRRW GWA-4164B> start writing Lead-Out at LBA 70320 (112B0h), length 0 blocks
12:05:41 AM #23 Phase 37 File dlgbrnst.cpp, Line 1685
Burn process completed successfully at 8x (11,080 KB/s)
12:05:41 AM #24 Phase 78 File dlgbrnst.cpp, Line 1685
Data verification started
12:05:58 AM #25 SPTI -1047 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 00 00 00 03 50 00 00 10 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 64
Buffer x074d1500: Len x8000
12:06:25 AM #26 SPTI -1047 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 00 00 00 04 20 00 00 10 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 64
Buffer x074d1500: Len x8000
12:06:25 AM #27 SectorVerify 20 File Cdrdrv.cpp, Line 9901
Read errors from sector 848 to 863
12:06:31 AM #28 SPTI -1047 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x64
Sense Qual: 0x00
CDB Data: 0x28 00 00 00 04 30 00 00 10 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 64
Buffer x074d1500: Len x8000
|
AfterDawn Addict
1 product review
|
15. January 2008 @ 02:16 |
Link to this message
|
@ EllyHuhle
Quote:
How do I buy more space? Can I do that by ordering and than downloading from the link you gave me?
The "space" that you are referring to I think is the "memory" that believeNC suggested that you should buy. That is RAM memory, it is a piece of hardware that you buy it and put it in your computer. You can buy it from that website.
Info about memory upgrade:
http://computermemoryupgrade.mysuperpc.com/
Quote:
Thank you again, I would have replied directly to you rather than through your shoutbox but I did not have a reply button on the message because someone replied to my message after you.
Elly
It is all good, just hit "replay" after the last poster. When you respond, you respond to everyone that posted in your thread. If you want to address your message to someone in particular, just write "@", or "to", followed by that members username.
 Piss me off, and I Will ignore You! |
|
Advertisement
|
|
|
AfterDawn Addict
|
15. January 2008 @ 02:28 |
Link to this message
|
|
looking better
but get some good dvdrs like TY or verbatims...
+ format needs to be booktyped for better compatibility, or try -R
Nothing here to see, move along folks.
|
|
