|
|
|
Can't burn using dvdshrink or nero
|
|
Junior Member
|
16. January 2008 @ 21:24 |
Link to this message
|
yea i wanted to know if someone can help me out because i cant burn using dvdshrink or nero here what comes out when i try to burn with dvdshrink
1K22-***serial number removed***
1K22-***serial number removed***
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero API version: 8.1.1.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero8\Nero Burning Rom\
Application: ahead\Nero - Burning Rom
Internal Version: 8, 1, 1, 0
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW LH-16W1P atapi Port 2 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CDW/DVD TS-H492A atapi Port 2 ID 1 DMA: On
DiskPeripheral : ST340015A atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW LH-16W1P D: CdRom0
TSSTcorp CDW/DVD TS-H492A J: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 38797312 (0) Byte
BUFE : 0
Physical memory : 238MB (244144kB)
Free physical memory: 135MB (139208kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.1.2008
NeroAPI
8:08:42 PM #1 Text 0 File NeroBurnCommon.cpp, Line 66
Message file not found
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
someone please help help out
thanks in advance
This message has been edited since posting. Last time this message was edited on 17. January 2008 @ 05:09
|
|
Advertisement
|
|
|
|
Member
|
16. January 2008 @ 21:35 |
Link to this message
|
|
Shrink does not burn - it only shrinks a DVD file and makes it an ISO file to be burned on a DVD
What are you trying to burn ?
Whether you think you can or you think you cant - either way youre right |
AfterDawn Addict
1 product review
|
16. January 2008 @ 22:54 |
Link to this message
|
DVD Shrink does not burn by itself, however, with older versions of Nero was possible for Shrink to automatically launch Nero and burn. It does not work with Nero 8:
http://forums.afterdawn.com/thread_view.cfm/579894
You have to save the DVD to Hard Disk and then manually open Nero and burn. If you want to burn automatically, download ImgBurn, it can be setup to autoburn from Shrink.
 Piss me off, and I Will ignore You!This message has been edited since posting. Last time this message was edited on 16. January 2008 @ 22:54
|
Junior Member
|
16. January 2008 @ 22:58 |
Link to this message
|
yea i know i cant burn with dvdshrink, i mean i cant even make a copy of a dvd, and when i try to burn a movie file with just nero i keep getting an error
|
AfterDawn Addict
1 product review
|
16. January 2008 @ 23:01 |
Link to this message
|
What is that error that you are getting when trying to burn just with nero?
You have some issues:
You have very little RAM memory:
Quote:
Physical memory : 238MB (244144kB)
Free physical memory: 135MB (139208kB)
You need at least 500MB to be able to do DVD work.
Also, you installed Nero 8 over nero 6. You should uninstall using Nero Clean Tool from Nero website and then reinstall. What kind of discs are you using?
Piss me off, and I Will ignore You!
|
Junior Member
|
16. January 2008 @ 23:08 |
Link to this message
|
ok ill try right now removing nero 6 with nero cleaner and im using philips dvd-r
|
AfterDawn Addict
1 product review
|
16. January 2008 @ 23:14 |
Link to this message
|
I would use Nero 8 Clean Tool.Bad choice of discs, poor quality. You should get some Verbatims, or Sonys. What is the firmware for your burner?
Piss me off, and I Will ignore You!
This message has been edited since posting. Last time this message was edited on 16. January 2008 @ 23:14
|
Moderator
|
17. January 2008 @ 05:27 |
Link to this message
|
|
Serial numbers removed from logfile and thread title renamed from the unhelpful "plZ help".
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
Junior Member
|
17. January 2008 @ 11:12 |
Link to this message
|
ok i uninstalled nero with nero tool and installed nero 7 again and i trued to make a dvd copy and this error came out
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 3
Recorder: <LITE-ON DVDRW LH-16W1P> Version: SL08 - HA 1 TA 0 - 7.2.3.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW LH-16W1P atapi Port 2 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CDW/DVD TS-H492A atapi Port 2 ID 1 DMA: On
DiskPeripheral : ST340015A atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW LH-16W1P D: CDRom0
TSSTcorp CDW/DVD TS-H492A J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 38797312 (0) Byte
BUFE : 0
Physical memory : 238MB (244144kB)
Free physical memory: 83MB (86004kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.1.2008
NeroAPI
10:02:32 AM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
10:02:33 AM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
10:02:33 AM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
10:02:40 AM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 37888KB of Memory
10:02:40 AM #5 Text 0 File Reader.cpp, Line 124
Reader running
10:02:40 AM #6 Text 0 File Writer.cpp, Line 113
Writer D: LITE-ON DVDRW LH-16W1P running
10:02:40 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
10:02:40 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:02:41 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:02:41 AM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
10:03:05 AM #11 Text 0 File DlgWaitCD.cpp, Line 290
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2246175 (499:09.00, 4387MB)
10:03:05 AM #12 Text 0 File DlgWaitCD.cpp, Line 302
Write in overburning mode: NO
10:03:05 AM #13 Text 0 File DlgWaitCD.cpp, Line 2733
Recorder: LITE-ON DVDRW LH-16W1P, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
10:03:05 AM #14 Text 0 File DlgWaitCD.cpp, Line 474
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD R DL.)
10:03:05 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2246176 (2246176) = #2246176/499:9.1
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2246176 blocks [D: LITE-ON DVDRW LH-16W1P]
--------------------------------------------------------------
10:03:06 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: LITE-ON DVDRW LH-16W1P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4600168448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2246176 | lead-out | 1 | 0x41 | 0x00
10:03:06 AM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:03:06 AM #18 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
10:03:06 AM #19 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
10:03:06 AM #20 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
10:03:06 AM #21 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 16x (22,160 KB/s)
10:03:07 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:03:07 AM #23 Text 0 File DVDR.cpp, Line 2905
Recording mode: Sequential Recording Mode
10:03:07 AM #24 Text 0 File DVDR.cpp, Line 3061
Start write address at LBA 0
DVD high compatibility mode: Yes
10:03:07 AM #25 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:03:52 AM #26 Text 0 File Cdrdrv.cpp, Line 1224
10:03:52.390 - D: LITE-ON DVDRW LH-16W1P : Queue again later
10:08:52 AM #27 SPTI -1135 File SCSIPassThrough.cpp, Line 291
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 17 3A 60 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x00de0000: Len x10000
0x00 00 01 BA 45 50 4C 1F D6 41 01 89 C3 F8 00 00
0x01 BD 07 EC 80 80 0A 21 54 13 0F DB FF FF FF FF
0xFF A0 07 00 3C 0E 01 80 FF 92 FF 9A FF 9C FF A1
10:08:52 AM #28 CDR -1135 File Writer.cpp, Line 302
Write error
D: LITE-ON DVDRW LH-16W1P
10:08:52 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:08:53 AM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:08:53 AM #31 Text 0 File DVDR.cpp, Line 3301
EndDAO: Last written address was 1522271
10:08:54 AM #32 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 16x (22,160 KB/s)
10:08:54 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
10:08:54 AM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/16/2006 2:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 5/2/2007 12:04:15 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 17. January 2008 @ 11:13
|
AfterDawn Addict
1 product review
|
17. January 2008 @ 11:21 |
Link to this message
|
You should uninstall the Roxio drivers, they conflict with nero. Use Roxio Zap to completely remove it.
http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
You installed an older version of Nero 7 . Don't know how stable that one is. here is the latest version 7:
http://www.softpedia.com/get/CD-DVD-Tool...7-Premium.shtml
You are using poor quality/low compatibility discs:
Quote:
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
and your burner does not care for them
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Do yourself a favor and go buy some verbatim or Sony discs. If you buy online, get Taiyo Yuden.
You are also burning way too fast @X16. Slow down to X8.
You are still running very low on RAM memory. If you want to burn DVDs, get at least 256 more RAM.
Piss me off, and I Will ignore You!
This message has been edited since posting. Last time this message was edited on 17. January 2008 @ 11:23
|
Junior Member
|
17. January 2008 @ 12:05 |
Link to this message
|
|
ok thanks ill lower my burning speed and try to get more ram
and roxio ive never had roxio installed on this computer
thanks ill post the results later
|
|
Advertisement
|
|
|
AfterDawn Addict
1 product review
|
17. January 2008 @ 12:21 |
Link to this message
|
Originally posted by BALLATONY:
ok thanks ill lower my burning speed and try to get more ram
and roxio ive never had roxio installed on this computer
thanks ill post the results later
LOL!You forgot to say "I'll get better discs"!
Piss me off, and I Will ignore You!
|
|
