Xbox v 1.0 resetting problem with xecutor 2.6

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Wednesday 23.7.2025 / 15:58

Search AfterDawn Forums:

afterdawn.com > forums > archived forums > xbox - software discussion > xbox v 1.0 resetting problem with xecutor 2.6

Browse by topic

Forums

Xbox v 1.0 resetting problem with xecutor 2.6

Jump to:

Posted

Message

ArmyAndy

Newbie

8. February 2008 @ 18:53

Link to this message

I broke my xecutor 2.6 switchboard - and had to wire the switch myself using a guide i found on the team xecutor website.

I wired it wrong - and fried a runner on the board!

So i fixed that by creating a bridge connection.

Finally back to where i started , I have connected the switch wires to boot off bank1, flash protect off with the chip enabled.

When i power on the xbox , the little blue led on the chip springs into life - finally i know the chip is getting power again.

Problem however is - the xbox turns on, turns off, turns on and off then flash green and red on the eject button ring.

Can anyone tell me why this is happening and how to repair it.

I think i may need to reflash the bios as well because i cannot remember if i had bank1 or bank2 in use and I have no idea how to do this (It was a long time ago when i used it last! Its a v1 xbox using the team xecuter 2.6 chip)

Thanks in advance for all your help!

Andy

[ + quote]

Get all your Computer Support needs here : http://www.UpsetPC.com

afterdawn.com > forums > archived forums > xbox - software discussion > xbox v 1.0 resetting problem with xecutor 2.6


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.