|
|
|
Burning stop working!!!
|
|
|
goido
Junior Member
|
20. February 2008 @ 03:14 |
Link to this message
|
I have burned dvds and music cds with no problem, tonight I went to burn some photos into a cd and I got an error " could not perform end track" Here is the log, please help since I don't have a clue. I have not downloaded any patches or other burning software.I am using Nero ASPI as usual. I selected cd as the media in Nero. Here is the log.
Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <HP DVD Writer 1040d> Version: EH23 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <DVD-ROM DVD-1S16P >Version: GSG7 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 5T060H6 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HP DVD Writer 1040d atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVD-ROM DVD-1S16P atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 1040d D: CDRom0
DVD-ROM DVD-1S16P E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 989MB (1013048kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.2.2008
CD-ROM (ISO)
11:58:26 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:58:26 PM #2 Text 0 File Burncd.cpp, Line 2948
HP DVD Writer 1040d
Buffer underrun protection activated
11:58:26 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
11:58:26 PM #4 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 1040d running
11:58:26 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:58:26 PM #6 Text 0 File Burncd.cpp, Line 3233
Turn on Track-At-Once, using CD-R/RW media
11:58:26 PM #7 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 208711 ( 46:24.61)
11:58:26 PM #8 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
11:58:26 PM #9 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 1040d;
CDRW code: 00 97 10 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 0A 00 (LI 97:10.00), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 4A B0, 2: 5C C6 26, 3: 00 80 80 (invalid)
11:58:26 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:58:26 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 208712 (208712) = #208712/46:22.62
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 208710 blocks [HP DVD Writer 1040d]
--------------------------------------------------------------
11:58:26 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 1040d] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 427749376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
208712 | lead-out | 1 | 0x41 | 0x00
11:58:26 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119
Removed 2 run-out blocks from end of track 1. Length: 208712 -> 208710.
11:58:26 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:58:26 PM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
11:58:26 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:58:26 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)
11:58:26 PM #18 SCSI -1189 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03D36000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02
11:58:26 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:58:26 PM #20 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
12:02:09 AM #21 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BEA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
12:02:09 AM #22 CDR -1106 File Writer.cpp, Line 311
Power calibration error
12:02:09 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:02:09 AM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:02:10 AM #25 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
HP DVD Writer 1040d\H1 T0
12:02:10 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
12:02:10 AM #27 Text 0 File Mmc.cpp, Line 16452
<HP DVD Writer 1040d> start Close Session
12:02:10 AM #28 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (600 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
1 product review
|
20. February 2008 @ 10:04 |
Link to this message
|
Quote:
CDRW code: 00 97 10 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 0A 00 (LI 97:10.00), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 4A B0, 2: 5C C6 26, 3: 00 80 80 (invalid)
-------------------------------------------------------------
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CANNOT READ MEDIUM - INCOMPATIBLE FORMAT
Your burner does not recognize the media that you are using. What discs are they?
Do you have the burner's firmware up to date?
http://h10025.www1.hp.com/ewfrf/wc/gener...=reg_R1002_USEN
 Piss me off, and I Will ignore You!This message has been edited since posting. Last time this message was edited on 20. February 2008 @ 10:08
|
|
goido
Junior Member
|
20. February 2008 @ 11:41 |
Link to this message
|
|
I have TDK CD RW I have not burned this media on this burner but this is a newer burner.It says DATA CD-RW by TDK but it is a older pack.
|
AfterDawn Addict
1 product review
|
20. February 2008 @ 12:57 |
Link to this message
|
|
Sorry to tell you the bad news, but your burner does not support those discs.It doesn't matter if it is a newer burner, old dics, whatever. It just does not recognize them, does not have the codes in the firmware to read/write them properly. A firmware update might fix that, if not you need new discs. Check OfficeMax and see if they still have the sale on Verbatim.
Piss me off, and I Will ignore You!
This message has been edited since posting. Last time this message was edited on 20. February 2008 @ 12:58
|
|
goido
Junior Member
|
21. February 2008 @ 00:56 |
Link to this message
|
Ok,I decided to burn the photos on the newer DVD MEDIA, I have burned DVD'S before with this drive and this media. The burn failed again twice at different speeds.I have not changed the Nero software at all, all the sudden I am getting these errors.I heard that You have to be really careful with firmwares because the may fried your drive. Is that true? Thanks again, here is the log of the failed DVDS.
Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <HP DVD Writer 1040d> Version: EH23 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <DVD-ROM DVD-1S16P >Version: GSG7 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 5T060H6 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HP DVD Writer 1040d atapi Port 1 ID 0 DMA: On
CdRomPeripheral : DVD-ROM DVD-1S16P atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 1040d D: CDRom0
DVD-ROM DVD-1S16P E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1535MB (1572336kB)
Free physical memory: 1015MB (1039704kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.2.2008
ISO compilation
9:45:11 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:45:11 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
9:45:11 PM #3 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 1040d running
9:45:11 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:45:11 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
9:45:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 208719 ( 46:22.69, 407MB)
9:45:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
9:45:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 1040d, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
9:45:11 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:45:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 208720 (208720) = #208720/46:22.70
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 208720 blocks [HP DVD Writer 1040d]
--------------------------------------------------------------
9:45:37 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 1040d] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 427458560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
208720 | lead-out | 1 | 0x41 | 0x00
9:45:37 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
9:45:38 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
9:45:38 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
9:45:38 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
9:45:38 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:45:38 PM #17 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
9:45:38 PM #18 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
9:46:42 PM #19 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BE50000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
9:46:42 PM #20 CDR -1106 File Writer.cpp, Line 311
Power calibration error
9:46:43 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:46:43 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:46:43 PM #23 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
9:46:43 PM #24 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
9:46:43 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 11:05:04 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
kumarito
Newbie
|
23. March 2008 @ 19:58 |
Link to this message
|
hello guys, i'll be really thankful to you if you help me with my cd drive. I got toshiba laptop and it has MATSHITA DVD ROM. i used to make cds and dvds before but for last few weeks i am unable to do this. it can play dvds but cann't open or burn any data cds. The software is already updated. When i put any data cd, it starts formatting but unable to format and shows me empty.
Anybody knows wht to do now? i m already went out of the warranty.
looking forward to get a quick reply.
|
|
