|
Ok I am following the guide and it reads like this..
*Type in Y and hit ENTER. FORMAT COMPLETED... (if you see any files that still exist inside your MS, Delete them manually)
1) Use mspformat.exe from the Pandora's Folder to format the Memory Stick.
2) Remove the Memory Stick and disable the USB connection.
3) Re-Connect the Memory Stick again via the USB connection of the PSP.
4) Install files using the installer!
5) Remove the Memory Stick and disable the USB connection.
6) Reinsert the memory stick and run the app "battery creator" on the psp.
7) Save Eeprom (the app will close)...Re-open the app and press x to convert battery.
8) You've got yourself magic memory stick + jigkick!
Usage:
- Insert Memory Stick into the PSP
- Remove power cord and insert the JigKick Battery into the PSP.
- A menu appears when the PSP boots. Follow the onscreen information
and instructions.
- Choose the option to downgrade to 1.5!
- That's it! have done!
------------------------------------------------
Anyways Heres my question. My PSP is modded and all that good stuff. So I should use this program to format MY memory card/turn my battery into a jigkick right...
THEN my friends PSP is a 1.73 Firmware, so I would turn it on with MY memory stick/jigkick battery in it, and downgrade it to 1.5 and then put his stick/battery BACK in and it will work fine right..?
He will be on 1.5 firmware then I can re-fix my battery the way it was and he will be on 1.5 and Ill still be on my 3.9 whatever CFW?
Im just making sure this is how it goes because it doesnt exactly say which PSP you do which section too, while it seems pretty self explanitory, some of the most simplist things always get complicated when you over think them.
ALSO on the 1-8 steps On this step right here
2) Remove the Memory Stick and disable the USB connection.
3) Re-Connect the Memory Stick again via the USB connection of the PSP.
Does that mean.. take out the memory card, disable USB, Put the memory card back in, and then re-connect through USB? It says reconnect memory stick via USB... how do you put in a memory card with the USB? Maybe slight grammar error, but just making sure Im reading this right.
Thanks all in advance.
|
