Mobile/PDA About Us Advertise here
User User name Password  
  Not registered yet? Register here.
Lost your password? Click here. 		 
  Home   News   Guides   Downloads   Glossary   Hardware   Profiles   Forums   v4  
 Advertise at AfterDawn.com     Link to us!     Private messages     Compose a private message     List of all updated threads     Threads without replies     Search messages
Sunday 3.8.2025 / 14:26
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > archived forums > xbox - general discussion > xecuter 2.3 lite + problems
Show topics
 
Forums
Forums
XECUTER 2.3 lite + PROBLEMS
  Jump to:
 
Posted Message
RAV2113
Newbie
_ 		9. January 2004 @ 11:46 _ Link to this message    Send private message to this user   
I just bought a Xectuer 2.3 lite plus from divineo, and when i was installing it on my xbox they two BLUE led light would not light up(even though it was set up correctly in the d0 point, and i tried to like ten times and it wouldnt work). So i though that probably the LED where messed up, So i connected the swicth and turned it to enable and turned on my xbox and then it would turn off by itself untill like the second time the eject button started to flash red and green, so i decied to put the switch to disable and restart the xbox and then i would see the green LED light up for about a second and then turn off, and the M$ dashboard would run. I think i should at least recieved the Cromwell screen on since i have a Conexant.

Please tell me what to do should i return my MODCHIP or could someone help me fix the problem
[ + quote]
Advertisement
_ 		__
G4MERZO1D
Member
_ 		9. January 2004 @ 14:36 _ Link to this message    Send private message to this user   
sounds like a bad alignment with the lpc ports or the d0 point, retry
[ + quote]
AMD X2 3800+ 120GB SATA HDD 2047 DDR2 RAM GeForce 8800GTS 320MB 2MB Virgin Cable
osouw
Newbie
_ 		9. January 2004 @ 18:04 _ Link to this message    Send private message to this user   
I just installed my 2.3 lite plus on my 1.0 Thompson DVD Xbox. This was my first ever install.

First off I used a contact cleaner pen (purchased from radioshack) and ran it over the d0 point AND the other contact points. I honestly think this step is very important.

But I was getting the green LED.. but no blue LED's.

The problem was because I didn't have the USB adapter connected to power it up! LOL! So in order to get the blue LED's (blue leds = power to the mod chip) you MUST have the USB adapter installed.

Just the net for how to install the usb adapter, its pretty simple. I hope this solves your problem
[ + quote]
RAV2113
Newbie
_ 		10. January 2004 @ 07:59 _ Link to this message    Send private message to this user   
AHHAHA no wonder i didnt know wut the other thing was for
THXS DUDE UR BEST
[ + quote]
elwhappo
Newbie
_ 		12. January 2004 @ 09:24 _ Link to this message    Send private message to this user   
My 2.3 did not come with any instruction (same XBOX 1.0). How do you connect to the USB for power?



Thanks,

Mike
[ + quote]
"Modchips? We don't need no stink'n MODCHIPS!"
G4MERZO1D
Member
_ 		12. January 2004 @ 11:07 _ Link to this message    Send private message to this user   
there are LOTS of installation tutorials out there, i dont know one of hand though, but just search google or something. i used one to fit a customers and very easy to follow. they dont come with instructions btw :P
[ + quote]
AMD X2 3800+ 120GB SATA HDD 2047 DDR2 RAM GeForce 8800GTS 320MB 2MB Virgin Cable
Advertisement
_ 		__
 
_
elwhappo
Newbie
_ 		12. January 2004 @ 13:07 _ Link to this message    Send private message to this user   
Thanks,

I finally got it by swapping it with the USB port on the Motherboard (XBOX 1.4), then on an XBOX 1.0, I jumped it off the small PCB that connects to the Motherboard.

So what I found is that if you align the pins with the holes (have the black and red cables attached already). Then run the black to the on off switch, then small red to the USB power unit. You will hook the black connection (6 pin) to the closest USB power slot (white pin, multi colored wires near the front of the case) unplug this from the xbox, then connect the mod. Then place the USB connector into the white portion of the mod chip.


Hope this helps someone!



Mike
[ + quote]
"Modchips? We don't need no stink'n MODCHIPS!"
afterdawn.com > forums > archived forums > xbox - general discussion > xecuter 2.3 lite + problems
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2025 by AfterDawn Ltd.

  IDG TechNetwork