before any blasts me i've tried the search with no answer. Tried everything.
anyways i needs your lots help please.
i got a dbox and no matter what flash i put on the box,it crashes or reboots.
it crashes at the point just of animated logo of what ever flash i use. after crashing just reboots or freezes. The tv screen showing is at the point when network is starting, the screen suddenly goes from 16:9 to 4:3 and as mentioned above happens. I have tried several flashes, flashes all load normaly. its when rebooting after that this happens. I've tried IfA latest and 1.5.6 with null modem and cross over cable, and tried manual way just with null cable and hyperterminal but eveytime same as above.
its been working fine for years i'm totally baffled. Never ever had this prob with any other dbox 1x or 2x sagem or nokia
I am also including my bootlog any help would be really much appreciated
thanks
»debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID Hallenberg.com dbox2 Linux Umbau Service Neutrino d-box d-box2
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.123.100, My IP 192.168.123.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature Branching to 0x40000
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.123.100; our IP address is 192.168.123.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.123.100; our IP address is 192.168.123.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.123.100; our IP address is 192.168.123.101
Filename 'logo-lcd'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.123.100; our IP address is 192.168.123.101
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.123.100; our IP address is 192.168.123.101
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ################################################## ###############
################################################## ########
done
Bytes transferred = 626108 (98dbc hex)
Using SCC ETHERNET device
TFTP from server 192.168.123.100; our IP address is 192.168.123.101
Filename 'u-initrd'.
Load address: 0x400000
Loading: ################################################## ###############
#################################################
done
Bytes transferred = 579075 (8d603 hex)
.................................................. ............. done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626044 Bytes = 611.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 579011 Bytes = 565.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 01f21000, end 01fae5c3 ... OK
Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.123.101:192.168.123.100:192.168.123.254 :255.255.255.0::ff
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30356k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:14:a6:cb
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Complete:
device=eth0, addr=192.168.123.101, mask=255.255.255.0, gw=192.168.123.254,
host=192.168.123.101, domain=, nis-domain=(none),
bootserver=192.168.123.100, rootserver=192.168.123.100, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 565k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.9.0 (2008-01-05 13:28:28 CET)
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
dbox2 - ImageFlashingAssistent 3.0
- Hallenberg.com -
Schreibe Backup: 8064k von 8064k (100%)
Lade Flashimage...
done.
Sende Backup...
Lösche Sektoren: 63 von 63 (100%)
Schreibe Daten: 8064k von 8064k (100%)
Verifziere Daten: 8064k von 8064k (100%)
Sie koennen die dbox jetzt ausschalten.
-------------------------------------------------------------
BootP: Got request from 00509C14A6CB
Error DeleteIpNetEntry: The parameter is incorrect.
BootP: Created ARP-entry with IP: 192.168.123.202 and Mac: 00509C14A6CB
BootP: Answer to 00509C14A6CB sent
TFTP: Sending C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer succsessfull completed
BootP: Got request from 00509C14A6CB
BootP: Created ARP-entry with IP: 192.168.123.202 and Mac: 00509C14A6CB
BootP: Answer to 00509C14A6CB sent
TFTP: Sending C:\Program Files\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer succsessfull completed
BootP: Got request from 00509C14A6CB
BootP: Created ARP-entry with IP: 192.168.123.202 and Mac: 00509C14A6CB
BootP: Answer to 00509C14A6CB sent
TFTP: Sending C:\Program Files\DBOX_IFA\tftp\logo-fb
TFTP: Transfer succsessfull completed
TFTP: Sending C:\Program Files\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer succsessfull completed
TFTP: Sending C:\Program Files\DBOX_IFA\tftp\u-initrd
TFTP: Transfer succsessfull completed
TFTP: Sending D:\New Folder-\muddy\Dbox\2x30.5.07.img
TFTP: Transfer succsessfull completed
TFTP: Writing backupimage to C:\Program Files\DBOX_IFA\Backups\2008-04-08 19-28-51_216.img
TFTP: Transfer succsessfull completed
TFTP: Transfer not succsessfull
TFTP: Transfer not succsessfull
TFTP: Transfer not succsessfull
TFTP: Transfer not succsessfull
TFTP: Transfer not succsessfull
------ Extra Informations ------
Selected Network adapter: Realtek RTL8139 Family PCI Fast Ethernet NIC (1)
IP-Adress of the Network Adapter: 192.168.123.100
IP-Adress of the Dbox: 192.168.123.202
Operatingsystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: Intel(R) Pentium(R) 4 CPU 2.80GHz @ 2788 MHz
Filename of the Images: 2x30.5.07.img
Imagetype: Two Flashs
DBOX-IFA Version: 3.1
------ Powered by Hallenberg.com dbox2 Linux Umbau Service Neutrino d-box d-box2 ------
