Hi guys, anytime I'm playing a game that needs the joystick to move like uefa 2008, fifa 2008 etc, the players keep moving to one direction if i dont control the joystick, i always have to control the players to move in the other direction which makes it hard for me to play, everything becomes difficult, even in orochi games (Japanese adventure game) when i get to the option screen the options just start moving up and down randomly.
Please what can i do to correct this, is it a hardware or software problem please hola back
dont try and u dont get it, its just a thing of life, 3.71 m33-2, gotta move with time, don't be left behind, b'cos uhave no1 to back u up!! Think about it
This message has been edited since posting. Last time this message was edited on 5. June 2008 @ 05:28
the analong stick it connected to the mother board buy a small rubber connecter the analog stick is not touching the rubber connecter correctly causing it to move in a single direction(bottom right i bet)
you can fix this buy tigtening the two screws that hold the analog stick to the faceplate (you will need to take the faceplate off to do this) and then tighten all the screws around the faceplate even the small silver one on the bottom.
that should fix it.
if not just loosen/tighten the screw untill its in the correct place, its very tediouse i know from having to do it myself but its worth it in the end. just make sure that you dont blunt the head of the screws!!!!
dont try and u dont get it, its just a thing of life, 3.71 m33-2, gotta move with time, don't be left behind, b'cos uhave no1 to back u up!! Think about it
Hi driver, tried wot u said tightened the screws on the analog stick, and the silver one beneath, but it didnt work, any other suggestions will be appreciated.
dont try and u dont get it, its just a thing of life, 3.71 m33-2, gotta move with time, don't be left behind, b'cos uhave no1 to back u up!! Think about it
dont try and u dont get it, its just a thing of life, 3.71 m33-2, gotta move with time, don't be left behind, b'cos uhave no1 to back u up!! Think about it
well it very unlikely to be software related but you can just check buy reflashing your fw using pandoras.
im guessing its hard ware related i.e the connector are not positiond correctly iv had the problem with mine loads of times i still have it now (not a bad).
check to see if any of the screws on the faceplate are loose but tightend, when i say this i mean are there any that you have screwed in that keep alowing it to be screwed in that is likly to be a problem (is in my case) this means that the thread on the plastic have been worn away and you will need a bigger thread screw to fit in.
it isnt something that happens in 2 goes iv had to keep taking the faceplate of and changing it about 10 time+ when i was sorting mine out.
also experement on different things that may help push the analong on the connector.
