|
|
|
Nero 6 Super-weird Problem
|
|
|
mkongx12
Newbie
|
16. July 2008 @ 13:43 |
Link to this message
|
Hello brothers and sisters,
Right...let me get straight to the point. I think I have made enough Mitsubitshi DVD-R coasters for my neighborhood tonight. So I have to admit I can't solve these Nero problems myself.
I use a NEC ND-3530A DVD-RW writer (firmware version 3.01), running WinXP, using Nero 6.6.0.18.
Here is my problem log sheet:
===========================
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1.0.0.0, size=21504 bytes, created 8/4/2003 0:39:24
ahead WinASPI: File 'C:\PROGRA~1\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <_NEC DVD_RW ND-3530A> Version: 3.01 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <d347prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : IC35L040AVVA07-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3530A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3530A D: CDRom0
Generic DVD-ROM G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 637MB (653300kB)
Free physical memory: 281MB (287744kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.7.2008
ISO compilation
1:19:31 #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:19:31 #2 Text 0 File Reader.cpp, Line 127
Reader running
1:19:31 #3 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3530A running
1:19:31 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:19:32 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
1:19:32 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287279 (508:17.04, 4467MB)
1:19:32 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)
1:19:32 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-3530A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
1:19:32 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:19:32 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2287280 (2287280) = #2287280/508:17.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287280 blocks [_NEC DVD_RW ND-3530A]
--------------------------------------------------------------
1:19:32 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-3530A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4684349440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2287280 | lead-out | 1 | 0x41 | 0x00
1:19:32 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
1:19:33 #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
1:19:33 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
1:19:33 #15 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
1:19:33 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:24:28 #17 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-3530A > start writing Lead-Out at LBA 2287280 (22E6B0h), lenght 0 blocks
1:24:28 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:24:28 #19 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 11.4x (15,756 KB/s)
1:24:28 #20 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
1:24:28 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:24:28 #22 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
1:24:28 #23 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
1:24:28 #24 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
1:24:28 #25 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:24:32 #26 Text 0 File Cdrdrv.cpp, Line 1288
01:24:32.828 - _NEC DVD_RW ND-3530A\H1 T0 : Queue again later
1:25:08 #27 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04480000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
1:25:08 #28 CDR -1135 File Writer.cpp, Line 311
Write error
1:25:08 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:25:08 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:25:08 #31 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
1:25:08 #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/8/2001 14:07:32
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 13:59:42 (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22/8/2004 16:31:48 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
================
I have solved several weird problems already. But this "Burn Process Failed at 8X" is really getting on my nerve, as I have changed the burn speed to 6x already.
Can anyone help me on this? Please?
Many Thanks!
Michael
|
|
Advertisement
|
 |
|
|
|
FUTUREPRO
Junior Member
|
16. July 2008 @ 18:06 |
Link to this message
|
maybe try an even slower speed or maybe nero 6 has bugs. ive never used nero 6 so i wouldnt kno but i dont have any problems with nero 7Quote:
I think I have made enough Mitsubitshi DVD-R coasters for my neighborhood tonight
|
Senior Member
|
16. July 2008 @ 18:42 |
Link to this message
|
hi :)
check and update your firmware from here
http://drivers.softpedia.com/get/FIRMWARE/Nec/index3.shtml
Quote:
CdRomPeripheral : _NEC DVD_RW ND-3530A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
DMA should be on (if one is down it can drag the other down)
Quote:
Last address to be written: 2287279 (508:17.04, 4467MB)
your burning a tad close to the edge of the disc where the dye is sometimes uneven/missing. set your DVD target at 4360
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
this is a burn error
if after the firmware and DMA..no luck. check that your burner is ok.
blow out the dust..use a cleaner to give the lazer a clean
not a lot wrong with your media (Verbatim)
with these 8x burn speed should be ok
 gif by ireland
we cant help if you wont help yourself This message has been edited since posting. Last time this message was edited on 16. July 2008 @ 19:48
|
|
mkongx12
Newbie
|
16. July 2008 @ 22:11 |
Link to this message
|
Originally posted by gurnard:
hi :)
check and update your firmware from here
http://drivers.softpedia.com/get/FIRMWARE/Nec/index3.shtml
Quote:
CdRomPeripheral : _NEC DVD_RW ND-3530A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
DMA should be on (if one is down it can drag the other down)
Quote:
Last address to be written: 2287279 (508:17.04, 4467MB)
your burning a tad close to the edge of the disc where the dye is sometimes uneven/missing. set your DVD target at 4360
Quote:
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
this is a burn error
if after the firmware and DMA..no luck. check that your burner is ok.
blow out the dust..use a cleaner to give the lazer a clean
not a lot wrong with your media (Verbatim)
with these 8x burn speed should be ok
Thanks!
I have checked the DMA and they are all turned on. I even followed the steps in http://uk.answers.yahoo.com/question/ind...26084150AAjQoc9 and double-confirm both devices on Primary and Secondary IDE Channels are "DMA if Available". So I don't know why Nero thinks it's off.
The firmware I have is 3.01, so I think it's more updated than 1.04c, right? Moreover, when I tried to flash it with 1.04c, the system says "Target NEC ND-3530A is not found correctly".
Thanks in advance once again!
Michael
|
|
Advertisement
|
|
|
Senior Member
|
17. July 2008 @ 07:08 |
Link to this message
|
This error TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Is usually 9/10 poor disk quality are they verbatim? Even if they are don?t take it as gospel that it?s not a problem with the disk?s I had a pack of 25 some years ago of verbatim only 2 of the 25 was any good
|
|
