|
|
|
Problems with DvdShrink and ImgBurn
|
|
|
JoeMac7
Newbie
|
28. July 2008 @ 18:04 |
Link to this message
|
Hi,
Would anyone be able to help, having problems with DVD Shrink and ImgBurn.
First i used DVD Fab 5 and then FixVTS1 then DVD Shrink and then ImgBurn following the instructions on here to the letter but ImgBurn errored.
Here is the error message that popped up:
$$I/O Error!
Device: [1:0:0] TSSTcorp CD/DVDW TS-L632D ac00 (E:) (ATA)
ScsiStatus: 0x02
Interpretation: Check condition
CDB: 2A 00 00 00 00 00 00 00 20 00
Interpretation: Write (10) ? Sectors: 0 ? 31
Sense Area: 71 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 00
00 00 00 00 00 00 00
Interpretation: Power Calibration Area Error
And here is the log from Img Burn:
W 22:46:43 Retry Failed - Power Calibration Area Is Full
W 22:46:43 Retrying (18 of 20)...
W 22:46:43 Retry Failed - Power Calibration Area Is Full
W 22:46:43 Retrying (19 of 20)...
W 22:46:43 Retry Failed - Power Calibration Area Is Full
W 22:46:43 Retrying (20 of 20)...
W 22:46:43 Retry Failed - Power Calibration Area Is Full
E 22:54:44 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
I 22:54:44 Synchronising Cache...
E 22:54:50 Failed to Write Image!
E 22:54:50 Operation Failed! - Duration: 00:19:23
I 22:54:50 Average Write Rate: N/A - Maximum Write Rate: N/A
Would anyone please be able to help. I?ve not used DvdShrink since i upgraded to vista last year because mainly of the Nero6 compatability but also due to the fact that until now i haven?t really needed to back up any DVDs. The discs are the same ones that worked fine back then and quite recently for some data dvds i had to do for work so im pretty sure it not the drive or the dics.
Anyone able to give me any tips to get around this
Sorry for the size of the post
Thanks a million
Joe
|
|
Advertisement
|
|
|
|
|
JoeMac7
Newbie
|
28. July 2008 @ 18:11 |
Link to this message
|
sorry forgot to mention the drive is an internal one in my acer laptop if thats any extra use.
|
AfterDawn Addict
|
28. July 2008 @ 18:26 |
Link to this message
|
|
You're burner is having a hard time reading your discs. Please post the whole log.
99% of all problems are between the computer and the chair.
|
|
JoeMac7
Newbie
|
28. July 2008 @ 18:33 |
Link to this message
|
Hi
That was all that was there after the burning had finished, went back into ImgBurn now and this is what appears if its of any use to you
I 23:31:22 ImgBurn Version 2.4.0.0 started!
I 23:31:22 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 23:31:22 Total Physical Memory: 3,077,892 KB - Available: 1,647,136 KB
W 23:31:22 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 23:31:22 Initialising SPTI...
I 23:31:22 Searching for SCSI / ATAPI devices...
I 23:31:22 Found 1 DVD-ROM and 1 DVD±RW/RAM!
|
AfterDawn Addict
1 product review
|
28. July 2008 @ 18:47 |
Link to this message
|
Power calibration error usually means either poor quality discs (media) or need for a burner firmware upgrade.So what brand of media are you using. My favorite is Taiyo Yuden
"The flimsier the product,the higher the price"
Ferengi 82nd rule of aqusition
 |
|
JoeMac7
Newbie
|
28. July 2008 @ 18:56 |
Link to this message
|
just some unbranded media i bought 400 of from a computer fair a couple of years back, ive never had any problems with them at all for burning up until now, as for a firmware update for my drive my computer has some empowering technology thingy that automatically updates stuff like that whenever acer make it available
|
AfterDawn Addict
|
28. July 2008 @ 19:01 |
Link to this message
|
|
Try making another burn and post that log.
You can change ImgBurn's settings so it won't overwrite the old log.
99% of all problems are between the computer and the chair.
|
AfterDawn Addict
1 product review
|
28. July 2008 @ 19:02 |
Link to this message
|
Imgburn just recently updated.so you may want to uninstall the old version of Imgburn, run ccleaner and install the newest version of Imgburn, then retry. Good luck
"The flimsier the product,the higher the price"
Ferengi 82nd rule of aqusition
|
Moderator
1 product review
|
28. July 2008 @ 19:19 |
Link to this message
|
No need to uninstall, Imgburn will install over existing versions no problem.
We still need a look and an entire log...go to Imgburn->Help_->Imgburn Logs.
|
|
JoeMac7
Newbie
|
28. July 2008 @ 19:28 |
Link to this message
|
|
thanks im doing another burn now to get a full log for you, ill post it as soon as i get it
|
|
JoeMac7
Newbie
|
28. July 2008 @ 19:45 |
Link to this message
|
here are all my log files from ImgBurn
I 00:41:01 ImgBurn Version 2.4.0.0 started!
I 00:41:01 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 00:41:01 Total Physical Memory: 3,077,892 KB - Available: 1,719,960 KB
W 00:41:01 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 00:41:02 Initialising SPTI...
I 00:41:02 Searching for SCSI / ATAPI devices...
I 00:41:05 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 00:41:05 Operation Started!
I 00:41:05 Source File: D:\MOVIES\PI30EUW1.MDS
I 00:41:05 Source File Sectors: 2,227,467 (MODE1/2048)
I 00:41:05 Source File Size: 4,561,852,416 bytes
I 00:41:05 Source File Volume Identifier: PI30EUW1
I 00:41:05 Source File Volume Set Identifier: 00EC7D2FDVDSHRNK
I 00:41:05 Source File Implementation Identifier: DVD Shrink
I 00:41:05 Source File File System(s): ISO9660, UDF (1.02)
I 00:41:05 Destination Device: [1:0:0] TSSTcorp CD/DVDW TS-L632D ac00 (E:) (ATA)
I 00:41:05 Destination Media Type: DVD-R (Disc ID: UME01) (Speeds: 2x, 4x)
I 00:41:05 Destination Media Sectors: 2,298,496
I 00:41:05 Write Mode: DVD
I 00:41:05 Write Type: DAO
I 00:41:05 Write Speed: MAX
I 00:41:05 Link Size: Auto
I 00:41:05 Test Mode: No
I 00:41:05 OPC: Yes
I 00:41:05 BURN-Proof: Enabled
W 00:41:29 Optimum Power Calibration Failed! - Reason: Power Calibration Area Error
I 00:41:29 Filling Buffer... (40 MB)
I 00:41:30 Writing LeadIn...
W 00:41:47 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
W 00:41:47 Retrying (1 of 20)...
W 00:42:04 Retry Failed - Power Calibration Area Error
W 00:42:04 Retrying (2 of 20)...
W 00:42:22 Retry Failed - Power Calibration Area Error
W 00:42:22 Retrying (3 of 20)...
W 00:42:39 Retry Failed - Power Calibration Area Error
W 00:42:39 Retrying (4 of 20)...
W 00:42:56 Retry Failed - Power Calibration Area Error
W 00:42:56 Retrying (5 of 20)...
I 00:43:12 Abort Request Acknowledged
W 00:43:12 Retry Failed - Power Calibration Area Error
E 00:43:12 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
I 00:43:12 Synchronising Cache...
E 00:43:16 Failed to Write Image!
E 00:43:16 Operation Aborted! - Duration: 00:02:10
I 00:43:16 Average Write Rate: N/A - Maximum Write Rate: N/A
; //****************************************\\
; ImgBurn Version 2.4.0.0 - Log
; Monday, 28 July 2008, 23:35:39
; \\****************************************//
;
;
I 23:34:01 ImgBurn Version 2.4.0.0 started!
I 23:34:01 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 23:34:01 Total Physical Memory: 3,077,892 KB - Available: 1,649,372 KB
W 23:34:01 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 23:34:01 Initialising SPTI...
I 23:34:01 Searching for SCSI / ATAPI devices...
I 23:34:02 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 23:34:42 Searching for SCSI / ATAPI devices...
I 23:34:42 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 23:35:39 Close Request Acknowledged
I 23:35:39 Closing Down...
I 23:35:39 Shutting down SPTI...
I 23:35:39 ImgBurn closed!
;
;
; //****************************************\\
; ImgBurn Version 2.4.0.0 - Log
; Monday, 28 July 2008, 23:32:14
; \\****************************************//
;
;
I 23:31:22 ImgBurn Version 2.4.0.0 started!
I 23:31:22 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 23:31:22 Total Physical Memory: 3,077,892 KB - Available: 1,647,136 KB
W 23:31:22 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 23:31:22 Initialising SPTI...
I 23:31:22 Searching for SCSI / ATAPI devices...
I 23:31:22 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 23:32:13 Close Request Acknowledged
I 23:32:13 Closing Down...
I 23:32:14 Shutting down SPTI...
I 23:32:14 ImgBurn closed!
;
;
; //****************************************\\
; ImgBurn Version 2.4.0.0 - Log
; Monday, 28 July 2008, 23:07:26
; \\****************************************//
;
;
I 23:07:14 ImgBurn Version 2.4.0.0 started!
I 23:07:14 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 23:07:14 Total Physical Memory: 3,077,892 KB - Available: 1,711,912 KB
W 23:07:14 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 23:07:15 Initialising SPTI...
I 23:07:15 Searching for SCSI / ATAPI devices...
I 23:07:15 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 23:07:25 Close Request Acknowledged
I 23:07:25 Closing Down...
I 23:07:26 Shutting down SPTI...
I 23:07:26 ImgBurn closed!
;
;
; //****************************************\\
; ImgBurn Version 2.4.0.0 - Log
; Monday, 28 July 2008, 23:05:50
; \\****************************************//
;
;
I 22:35:22 ImgBurn Version 2.4.0.0 started!
I 22:35:22 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 22:35:22 Total Physical Memory: 3,077,892 KB - Available: 1,730,568 KB
W 22:35:22 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 22:35:23 Initialising SPTI...
I 22:35:23 Searching for SCSI / ATAPI devices...
I 22:35:26 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 22:35:26 Operation Started!
I 22:35:26 Source File: D:\MOVIES\POTC3.MDS
I 22:35:26 Source File Sectors: 2,227,481 (MODE1/2048)
I 22:35:26 Source File Size: 4,561,881,088 bytes
I 22:35:26 Source File Volume Identifier: PI30EUW1
I 22:35:26 Source File Volume Set Identifier: 007975ECDVDSHRNK
I 22:35:26 Source File Implementation Identifier: DVD Shrink
I 22:35:26 Source File File System(s): ISO9660, UDF (1.02)
I 22:35:26 Destination Device: [1:0:0] TSSTcorp CD/DVDW TS-L632D ac00 (E:) (ATA)
I 22:35:26 Destination Media Type: DVD-R (Disc ID: UME01) (Speeds: 2x, 4x)
I 22:35:26 Destination Media Sectors: 2,298,496
I 22:35:26 Write Mode: DVD
I 22:35:26 Write Type: DAO
I 22:35:26 Write Speed: MAX
I 22:35:26 Link Size: Auto
I 22:35:26 Test Mode: No
I 22:35:26 OPC: Yes
I 22:35:26 BURN-Proof: Enabled
W 22:35:51 Optimum Power Calibration Failed! - Reason: Power Calibration Area Error
W 22:35:51 Retrying (1)...
W 22:36:09 Retry Failed - Reason: Power Calibration Area Error
W 22:36:09 Retrying (2)...
W 22:38:01 Retry Failed - Reason: Power Calibration Area Error
W 22:38:01 Retrying (3)...
W 22:38:48 Retry Failed - Reason: Power Calibration Area Error
W 22:38:48 Retrying (4)...
W 22:42:09 Optimum Power Calibration Failed! - Reason: Power Calibration Area Error
I 22:42:09 Filling Buffer... (40 MB)
I 22:42:10 Writing LeadIn...
W 22:42:31 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
W 22:42:31 Retrying (1 of 20)...
W 22:42:48 Retry Failed - Power Calibration Area Error
W 22:42:48 Retrying (2 of 20)...
W 22:43:05 Retry Failed - Power Calibration Area Error
W 22:43:05 Retrying (3 of 20)...
W 22:43:21 Retry Failed - Power Calibration Area Error
W 22:43:21 Retrying (4 of 20)...
W 22:43:38 Retry Failed - Power Calibration Area Error
W 22:43:38 Retrying (5 of 20)...
W 22:43:54 Retry Failed - Power Calibration Area Error
W 22:43:54 Retrying (6 of 20)...
W 22:44:11 Retry Failed - Power Calibration Area Error
W 22:44:11 Retrying (7 of 20)...
W 22:44:28 Retry Failed - Power Calibration Area Error
W 22:44:28 Retrying (8 of 20)...
W 22:44:45 Retry Failed - Power Calibration Area Error
W 22:44:45 Retrying (9 of 20)...
W 22:45:02 Retry Failed - Power Calibration Area Error
W 22:45:02 Retrying (10 of 20)...
W 22:45:18 Retry Failed - Power Calibration Area Error
W 22:45:18 Retrying (11 of 20)...
W 22:45:35 Retry Failed - Power Calibration Area Error
W 22:45:35 Retrying (12 of 20)...
W 22:45:51 Retry Failed - Power Calibration Area Error
W 22:45:51 Retrying (13 of 20)...
W 22:46:08 Retry Failed - Power Calibration Area Error
W 22:46:08 Retrying (14 of 20)...
W 22:46:26 Retry Failed - Power Calibration Area Error
W 22:46:26 Retrying (15 of 20)...
W 22:46:43 Retry Failed - Power Calibration Area Error
W 22:46:43 Retrying (16 of 20)...
W 22:46:43 Retry Failed - Power Calibration Area Is Full
W 22:46:43 Retrying (17 of 20)...
W 22:46:43 Retry Failed - Power Calibration Area Is Full
W 22:46:43 Retrying (18 of 20)...
W 22:46:43 Retry Failed - Power Calibration Area Is Full
W 22:46:43 Retrying (19 of 20)...
W 22:46:43 Retry Failed - Power Calibration Area Is Full
W 22:46:43 Retrying (20 of 20)...
W 22:46:43 Retry Failed - Power Calibration Area Is Full
E 22:54:44 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
I 22:54:44 Synchronising Cache...
E 22:54:50 Failed to Write Image!
E 22:54:50 Operation Failed! - Duration: 00:19:23
I 22:54:50 Average Write Rate: N/A - Maximum Write Rate: N/A
I 23:05:50 Close Request Acknowledged
I 23:05:50 Closing Down...
I 23:05:50 Shutting down SPTI...
I 23:05:50 ImgBurn closed!
;
;
; //****************************************\\
; ImgBurn Version 2.4.0.0 - Log
; Sunday, 27 July 2008, 22:50:43
; \\****************************************//
;
;
I 22:50:36 ImgBurn Version 2.4.0.0 started!
I 22:50:36 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 22:50:36 Total Physical Memory: 3,077,892 KB - Available: 1,640,124 KB
W 22:50:36 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 22:50:37 Initialising SPTI...
I 22:50:37 Searching for SCSI / ATAPI devices...
I 22:50:38 Close Request Acknowledged
I 22:50:38 Closing Down...
I 22:50:39 Found 1 DVD±RW/RAM!
I 22:50:43 Shutting down SPTI...
I 22:50:43 ImgBurn closed!
;
;
; //****************************************\\
; ImgBurn Version 2.4.0.0 - Log
; Thursday, 27 March 2008, 21:33:33
; \\****************************************//
;
;
I 21:10:32 ImgBurn Version 2.4.0.0 started!
I 21:10:32 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 21:10:32 Total Physical Memory: 3,077,892 KB - Available: 1,891,912 KB
W 21:10:32 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 21:10:32 Initialising SPTI...
I 21:10:32 Searching for SCSI / ATAPI devices...
I 21:10:33 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 21:11:46 Operation Started!
I 21:11:46 Source File: D:\MOVIES\VIDEO_TS\LIFE_ON_MARS_S1_D1.MDS
I 21:11:46 Source File Sectors: 2,285,844 (MODE1/2048)
I 21:11:46 Source File Size: 4,681,408,512 bytes
I 21:11:46 Source File Volume Identifier: LIFE_ON_MARS_S1_D1
I 21:11:46 Source File Volume Set Identifier: 003844ECDVDSHRNK
I 21:11:46 Source File Implementation Identifier: DVD Shrink
I 21:11:46 Source File File System(s): ISO9660, UDF (1.02)
I 21:11:46 Destination Device: [1:0:0] TSSTcorp CD/DVDW TS-L632D ac00 (E:) (ATA)
I 21:11:46 Destination Media Type: DVD-R (Disc ID: UME01) (Speeds: 2x, 4x)
I 21:11:46 Destination Media Sectors: 2,298,496
I 21:11:46 Write Mode: DVD
I 21:11:46 Write Type: DAO
I 21:11:46 Write Speed: MAX
I 21:11:46 Link Size: Auto
I 21:11:46 Test Mode: No
I 21:11:46 OPC: Yes
I 21:11:46 BURN-Proof: Enabled
I 21:11:54 Filling Buffer... (40 MB)
I 21:11:55 Writing LeadIn...
I 21:12:36 Writing Session 1 of 1... (1 Track, LBA: 0 - 2285843)
I 21:12:36 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2285843)
W 21:33:09 Failed to Write Sectors 360960 - 360991 - Write Error
W 21:33:09 Retrying (1 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (2 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (3 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (4 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (5 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (6 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (7 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (8 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (9 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (10 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (11 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (12 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (13 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (14 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (15 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (16 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (17 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (18 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (19 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:09 Retrying (20 of 20)...
W 21:33:09 Retry Failed - Logical Block Address out of Range
W 21:33:18 Retrying (21)...
W 21:33:18 Retry Failed - Logical Block Address out of Range
W 21:33:19 Retrying (22)...
W 21:33:19 Retry Failed - Logical Block Address out of Range
W 21:33:19 Retrying (23)...
W 21:33:19 Retry Failed - Logical Block Address out of Range
W 21:33:20 Retrying (24)...
W 21:33:20 Retry Failed - Logical Block Address out of Range
W 21:33:20 Retrying (25)...
W 21:33:20 Retry Failed - Logical Block Address out of Range
W 21:33:20 Retrying (26)...
W 21:33:20 Retry Failed - Logical Block Address out of Range
W 21:33:20 Retrying (27)...
W 21:33:20 Retry Failed - Logical Block Address out of Range
W 21:33:22 Retrying (28)...
W 21:33:22 Retry Failed - Logical Block Address out of Range
W 21:33:23 Retrying (29)...
W 21:33:23 Retry Failed - Logical Block Address out of Range
W 21:33:24 Retrying (30)...
W 21:33:24 Retry Failed - Logical Block Address out of Range
W 21:33:24 Retrying (31)...
W 21:33:24 Retry Failed - Logical Block Address out of Range
E 21:33:25 Failed to Write Sectors 360960 - 360991 - Write Error
I 21:33:25 Synchronising Cache...
E 21:33:30 Failed to Write Image!
I 21:33:30 Exporting Graph Data...
I 21:33:30 Graph Data File: C:\Users\Joseph McGranaghan\AppData\Roaming\ImgBurn\IBG Files\TSSTcorp_CD-DVDW_TS-L632D_ac00_27-MARCH-2008_21-11_UME01_MAX.ibg
I 21:33:30 Export Successfully Completed!
E 21:33:30 Operation Failed! - Duration: 00:21:43
I 21:33:30 Average Write Rate: 578 KB/s (0.4x) - Maximum Write Rate: 5,585 KB/s (4.0x)
I 21:33:33 Close Request Acknowledged
I 21:33:33 Closing Down...
I 21:33:33 Shutting down SPTI...
I 21:33:33 ImgBurn closed!
;
;
; //****************************************\\
; ImgBurn Version 2.4.0.0 - Log
; Thursday, 27 March 2008, 19:51:13
; \\****************************************//
;
;
I 19:50:29 ImgBurn Version 2.4.0.0 started!
I 19:50:29 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 19:50:29 Total Physical Memory: 3,077,892 KB - Available: 1,375,708 KB
W 19:50:29 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 19:50:30 Initialising SPTI...
I 19:50:30 Searching for SCSI / ATAPI devices...
I 19:50:32 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 19:51:13 Close Request Acknowledged
I 19:51:13 Closing Down...
I 19:51:13 Shutting down SPTI...
I 19:51:13 ImgBurn closed!
;
;
; //****************************************\\
; ImgBurn Version 2.4.0.0 - Log
; Thursday, 27 March 2008, 18:35:23
; \\****************************************//
;
;
I 18:35:06 ImgBurn Version 2.4.0.0 started!
I 18:35:06 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 18:35:06 Total Physical Memory: 3,077,892 KB - Available: 1,725,240 KB
W 18:35:06 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 18:35:07 Initialising SPTI...
I 18:35:07 Searching for SCSI / ATAPI devices...
I 18:35:07 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 18:35:23 Close Request Acknowledged
I 18:35:23 Closing Down...
I 18:35:23 Shutting down SPTI...
I 18:35:23 ImgBurn closed!
;
;
; //****************************************\\
; ImgBurn Version 2.4.0.0 - Log
; Thursday, 27 March 2008, 18:34:33
; \\****************************************//
;
;
I 18:34:19 ImgBurn Version 2.4.0.0 started!
I 18:34:19 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 18:34:19 Total Physical Memory: 3,077,892 KB - Available: 1,758,184 KB
W 18:34:19 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 18:34:20 Initialising SPTI...
I 18:34:20 Searching for SCSI / ATAPI devices...
I 18:34:20 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 18:34:26 Close Request Acknowledged
I 18:34:26 Closing Down...
I 18:34:33 Shutting down SPTI...
I 18:34:33 ImgBurn closed!
|
AfterDawn Addict
|
28. July 2008 @ 20:34 |
Link to this message
|
You might want to try updating your firmware to SC04 and get some decent media.
99% of all problems are between the computer and the chair.
|
AfterDawn Addict
3 product reviews
|
28. July 2008 @ 21:05 |
Link to this message
|
And Imgburn has updated to 2.4.2.0...just so you're aware. :)
|
Moderator
1 product review
|
29. July 2008 @ 07:58 |
Link to this message
|
Quote:
I 21:11:46 Destination Media Type: DVD-R (Disc ID: UME01) (Speeds: 2x, 4x)
Get some decent media. Your power calibration errors and logical block errors are due to your drive not being able to handle the media. You may have been able to use them in the past, but you are seeing the results now.
|
AfterDawn Addict
3 product reviews
|
29. July 2008 @ 09:00 |
Link to this message
|
Taiyo Yuden and Verbatim are the way to go.
Good quality backups require using good quality blank media.
|
|
JoeMac7
Newbie
|
30. July 2008 @ 16:06 |
Link to this message
|
Hi
I've been out today and bought some better quality media, local comp shop didnt have either of the brands you recomended but i got some sony ones as nearly everything i buy sony lasts forever so i figured they couldnt be bad. Anyway, it at least started to write this time but still eventually failed after 61% was burnt.
here is the log:
I 20:35:49 ImgBurn Version 2.4.2.0 started!
I 20:35:49 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)
I 20:35:49 Total Physical Memory: 3,077,892 KB - Available: 1,746,540 KB
W 20:35:49 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 20:35:49 Initialising SPTI...
I 20:35:49 Searching for SCSI / ATAPI devices...
I 20:35:52 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 20:35:53 Operation Started!
I 20:35:53 Source File: G:\PI30EUW1.ISO
I 20:35:53 Source File Sectors: 2,285,848 (MODE1/2048)
I 20:35:53 Source File Size: 4,681,416,704 bytes
I 20:35:53 Source File Volume Identifier: PI30EUW1
I 20:35:53 Source File Volume Set Identifier: 0043A4F6DVDSHRNK
I 20:35:53 Source File Implementation Identifier: DVD Shrink
I 20:35:53 Source File File System(s): ISO9660, UDF (1.02)
I 20:35:53 Destination Device: [1:0:0] TSSTcorp CD/DVDW TS-L632D ac00 (E:) (ATA)
I 20:35:53 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 2x, 4x, 6x)
I 20:35:53 Destination Media Sectors: 2,298,496
I 20:35:53 Write Mode: DVD
I 20:35:53 Write Type: DAO
I 20:35:53 Write Speed: MAX
I 20:35:53 Link Size: Auto
I 20:35:53 Test Mode: No
I 20:35:53 OPC: No
I 20:35:53 BURN-Proof: Enabled
I 20:35:53 Filling Buffer... (40 MB)
I 20:35:54 Writing LeadIn...
I 20:36:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 2285847)
I 20:36:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2285847)
W 20:58:15 Failed to Write Sectors 1409536 - 1409567 - Reason: Write Error
W 20:58:15 Retrying (1 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (2 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (3 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (4 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (5 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (6 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (7 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (8 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (9 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (10 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (11 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (12 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (13 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (14 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (15 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (16 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (17 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (18 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (19 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
W 20:58:15 Retrying (20 of 20)...
W 20:58:15 Retry Failed - Reason: Logical Block Address out of Range
E 21:04:15 Failed to Write Sectors 1409536 - 1409567 - Reason: Write Error
I 21:04:15 Synchronising Cache...
E 21:04:20 Failed to Write Image!
I 21:04:20 Exporting Graph Data...
I 21:04:20 Graph Data File: C:\Users\Joseph McGranaghan\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CD-DVDW_TS-L632D_ac00_30-JULY-2008_20-35_SONY16D1_MAX.ibg
I 21:04:20 Export Successfully Completed!
E 21:04:20 Operation Failed! - Duration: 00:28:27
I 21:04:20 Average Write Rate: 1,717 KB/s (1.2x) - Maximum Write Rate: 8,382 KB/s (6.1x)
and here is the error message:
I/O Error!
Scsi Status: 0x02
Interpretation: Check condition
CDB: 2A 00 00 15 82 00 00 00 20 00
Interpretation: Write (10) - Sectors: 1409536 - 1409537
Sense Area: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 00
00 00 00 00 00 00 00
Interpretation: Write Error
and here is what was down the right on ImgBurn afterwards:
TSSTcorp CD/DVDW TS-L632D ac00 (ATA)
Current Profile: DVD-R
Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Free Sectors: 2,285,848
Free Space: 4,681,416,704 bytes
Free Time: 507:59:73 (MM:SS:FF)
Supported Write Speeds: 2x, 4x, 6x
TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Audio, 3684:34:59, LBA: 0 - 16580608)
-> LeadOut (LBA: 16580609)
Pre-recorded Information:
Manufacturer ID: SONY16D1
Recording Management Area Information:
TSSTcorp ac00zky TS-L632D
Physical Format Information (Last Recorded):
Disc ID: 0@P-!-00
Book Type: DVD-R
Part Version: 5
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,482,455
Last Physical Sector in Layer 0: 0
Any ideas
Thanks
Joe
|
AfterDawn Addict
|
30. July 2008 @ 16:33 |
Link to this message
|
Your drive still only sees the discs at 6X. Update your firmware.
99% of all problems are between the computer and the chair.
|
|
Advertisement
|
|
|
Senior Member
|
30. July 2008 @ 20:27 |
Link to this message
|
|
You should also slow your write speed down, a good rule of thumb is half of the rated disk speed, at least until you see how your disk and burner will work together. Some do better than others.
|
|
