Your code:Try this ONCE and ONCE only. Remember,
you only get 3 to 5 tries.
If you enter the same code two times,
that is two tries. To enter code:
Make sure battery is charged.
Remove SIM first.
Power on.
Ignore ?Insert SIM?
Press the # key.
then press the "star" key (*) quickly to get the P and W and +
Press * 3 times quickly for (p) \
Press * 4 times quickly for (w) IMPORTANT
Press * 2 times quickly for (+) /
and the rest of the code---
Begin with # and end with #.
IMPORTANT!!
Verify code before pressing the last #.
Pay attention. You only have about two seconds.
"Phone restrictions off", it's unlocked.
"Error code" wrong code. STOP tell me.
"Not allowed" or "Can Not Undo Restriction" it's hard locked.
Used up all your free tries!!
If nothing happens, code stays on the screen: Put in a NEW SIM from a new Network.
Power on.
Select UNDO with NEW SIM in phone.
Enter code as above.
Select OK.
If it does not work, tell me: What happened? What message
you got. What codes you tried.
Above all, answer.
JG
Unfortunately the code doesn't work and I got the message "Error code" wrong code (with a green marker). I followed the instructions, tried to enter the unlock code twice and verified it several times.
Some additional information the phone is a pre-paid Albert Hein Nokia 1600 on the KPN network
Originally posted by SmashItNL: Unfortunately the code doesn't work and I got the message "Error code" wrong code (with a green marker). I followed the instructions, tried to enter the unlock code twice and verified it several times.
Some additional information the phone is a pre-paid Albert Hein Nokia 1600 on the KPN network
Power The Phone On
Enter codes WITHOUT spaces.
Press # From The Screen
Press * 3 times fast for (p)
Press * 4 times fast for (w)
Press * 2 times fast for (+)
Verify code before pressing the last #
If you see"Code error", don't try again!!!
Power The Phone On
Enter codes WITHOUT spaces.
Press # From The Screen
Press * 3 times fast for (p)
Press * 4 times fast for (w)
Press * 2 times fast for (+)
Verify code before pressing the last #
If you see"Code error", don't try again!!!
