Originally posted by ragit:

---

much appreciate your reply Mr Guru :)

its prolly best i do this tomorow night when i`m not so tired ..last thing i wana do is bugger it up , the kids will go nuts lol

is it safe to say i have to expand the 1.9g bootdisc.pal like i did with the 1.3 ?? if yes i`m well set to keeping all indoors happy

---

Originally posted by poohba42:

---

Been reading this in anticipation of my 1.9g update not working! ( i say cynically!)

However, when i burn the pal 1.9g update (mine is PAL) and boot it up, it comes up saying: wiikey update v1.9g beta [US]

Isn't that supposed to say PAL?

Since i got the chip installed all i've done is turn it to regionfree.

I would really appreciate any help.
Thanks

---

Originally posted by ragit:

---

sorry for the long blurb , i do tend to meander and wind in forums lol

---

Originally posted by Rascal13:

---

Im about to update my wiikey to 1.9b but I see theres some mixed methods some people are saying to just burn the update image and others are saying to use filechop.exe so Im a little confused here now. What is the actually method. Also my Wii is running firmware version 3 and I need a GCOS disk so I can boot into the config disk after I update were can I download that?

Thanks in advanced.

**Also once I get this to work I plan on uploading the .ISO's files for people just to download and use to make things easier.

I think I just found some working 1.3 config image.

US: http://rapidshare.com/files/58414399/gcos_config_1.3.zip.html
PAL: http://rapidshare.com/files/58432677/gcos_1.3_pal.zip.html
JAP: http://rapidshare.com/files/58432027/gco...ip.html

---

Quote:

---

tried to update to 1.9b and it ran, did the test, then said there was a problem "check connections". I should point out that the DVD was written on Nero, high compatibility, so should have padded!

So I thought I should run 1.3 update, again burnt onto -R. Straight to error screen.

---

Originally posted by riffraff2:

---

Hi,

Hoping someone can help me with my problem. Here is my situation:

1. I have a Wii recently modchipped with WiiKey, current firmware version is 3.0E.
2. I downloaded the 1.9b update and 1.3 config iso's, used filechop on both, and burned them both to dvd.
3. I tried the 1.3 cd, it could not be read. So I used the 1.9b update cd and it worked (using reset button to go through prompts). After this I tried the 1.3 cd again but it still did not work.

How can I get the 1.3 cd to work? I do not have a Gamecube controller so as far as I can tell I cannot use the GCOS boot cd solution which ppl mentioned requires a GC controller.

Your help greatly appreciated

---

Originally posted by Kouji_San:

---

I just have one question (read trough the entire thread as well)

I'm using DVD+R, ImgBurn (2x and 4x) and have tried all the settings that have been suggested here. However my ISO files are indeed 1.35GB (1.459.978.240 bytes) with the help of filechop.exe, but the burned DVD is still just only ~7MB (0.9g update disk) when viewing the properties of it in explorer. Also the DVD disk itself looks like it has been burned to 1.35 GB (visible written data on disk).

Now my question is, while the image has to be 1.35GB does the resulting burned CD have that size as well? Because I see used space at only ~7MB as if the filechop.exe didn't do anything at all to the "hidden" track.

Going to try normal R DVD's tomorrow as well to see if the problem lies there...

Thanks in advance :)

---

Originally posted by KingJude:

---

i havent done any updates for a long time. i have 2.2e on my pal wii and i read that updates might brick your wii.. so i dont kow what to do and i use wiikey and used 1.2 now they have 1.3 and also 1.9b and i have no clue what that is..can anyone tell me what should i do to play all the latest games on my modded wii?

---

Originally posted by KingJude:

---

after i do an update...do i use the wiikey update and all that?

---

Originally posted by crazybuzz:

---

Hi guys. I have figured it out.
All you people saying this is simple, I disagree. When you say things like "navigate to the 1.9b folder, people do not no what you are saying. These are reasons they do not understand.

This is what I did.

1. Download from wiikey.cn the files 'update1.9b' and 'config.1.3'
2. extract these files.
3. open the folder 'config.1.3' and copy the file 'filechop'
4. Paste 'filechop' into the folder 'update1.9b'
5. Click on 'start' then 'run'.
6. click on 'browse' and find the folder 'update1.9b'
7. double click on 'filechop'
8. In the open text field, you should see something similar to this.
"C:\Documents and Settings\Admin\Desktop\update1.9b\filechop.exe"
9. add this to the end of the text. wkupdate.1.9b.xx.iso 1459978240 (were there is 'xx' put your region. For example. wkupdate.1.9b.PAL.iso 1459978240)
10. The text in the field should now look something like this.
"C:\Documents and Settings\Admin\Desktop\update1.9b\filechop.exe" wkupdate.1.9b.PAL.iso 1459978240
11. Hit 'OK' The size of your iso file should have changed now.

I am not going to proof read this, so if you have any problems. Please just post below.:)

---