I am trying to recover my xbox, i luckily saved the eeprom file onto my computer before the hard drive bit the dust. i was using unleashx .38 on a retail drive. I have a 160gb seagate that is listed as compatible, and so far i have built the hard drive, but i cannot lock it. Every time i type lockhd -a it gives me the message "primary drive is frozen, try disabling automatic detection"
I have tried all the BIOS settings on my computer, trying to figure out that lucky combo, to no avail. Motherboard used is an ASUS M2N SLI deluxe, if that helps at all. I have no floppy drive or even a floppy disk. I am on my 4th reburn of the program, I always burned at 8x.
Maybe my problem is the fact my mobo has oneIDEchannel? I have the harddrive as Master jumped on the first connection of the cable, CDROM as SLAVE jumped on the second connector. the program recognized the hardrive, built it with my Dash files (MS files), set my F drive and formatted with the program.
I tried "mount /dev/hdc/cdrom etc...." did not work, I have tried this several times, reformatted the harddrive, used different versions of xboxhdm.
do not connect the ide cable to your drive until you get to the screen where you type in lockhd =a. i had the same problem, just connect the cable at the above screen. that should do the trick
