|
Toshiba A3 bricked after firmware update...Need help to unbrick!!!!
|
|
|
indyjase
Junior Member
|
21. October 2008 @ 18:37 |
Link to this message
|
Bugger, just tried to update the firmware via ethernet, well it has never worked before so I thought I would try and well it went through until, I checked back with the unit and the pic on the TV was snowy. Odd I thought. It said step 4/4. It would not turn off using the power button on the front and thus I pulled out the mains power. I phoned toshiba and tried un plugging for 3 mins to reset but to no avail. All that happens is that it says welcome on the front panel and that is it!
Is there anyway that I can unbrick it via software or what have you....pleas tell me its not dead....any help will be most appreciated....Thanks
Easy Like Sunday Morning
|
|
Advertisement
|
 |
|
|
|
Dragula96
Suspended permanently
|
22. October 2008 @ 10:58 |
Link to this message
|
|
I haven't updated mine in awhile, so I cant remember all the steps. But I think you have to wait until that "4/4" is done also. Never a good idea to unplug something while the FW is being updated. It specifically says that in the manual and while your updating! Sounds like you bricked it to me. I'd check around Google - might have better luck there.
|
|
indyjase
Junior Member
|
22. October 2008 @ 12:14 |
Link to this message
|
I got to the part of the update that said 4/4 and followed all of the instuctions (updated my samsung bluray at the same time no problem) and the player did not want to cooperate so thus my only option was to turn it off. I have spent hours looking over google to no avail so I thought that someone might know here. I took the player to the store where I got it last night and they are going to fix it and as well as that toshiba said they would exchange it no problems, so not all doom and gloom hats off to the techs at toshiba very helpful. However it would still be nice to know how to unbrick it as I am too much of a curious fellow to not try another firmware update.....Too much of it it aint broke break it and fix it kinda guy....a pain but true!!!!!
Easy Like Sunday Morning
|
Senior Member
11 product reviews
|
22. October 2008 @ 13:04 |
Link to this message
|
I tried to help out, and did a search on this issue, and bad news, this is what I found:
DO NOT UNPLUG, TURN OFF, OR USE ANY OTHER FEATURE OF YOUR PLAYER DURING THE FIRMWARE UPDATE PROCESS. Doing so will cause the writing of the firmware update to the player to be halted and the player may no longer operate properly. If the player stops working, please contact Toshiba Customer Solutions at 1-800-319-6684 or HD-DVD Concierge at 1-888-MY HD DVD (1-888-694-3383) .
Know how to drive a person CRAZY? <<Click Here>>
|
|
indyjase
Junior Member
|
23. October 2008 @ 09:42 |
Link to this message
|
yes found that too, but was glad both the store where I brought it and toshiba said they would either fix it or replace it so thats not a worry!!! as well as put the new firmware update on so thats not bad, guess I'll have to tinker less!!!!!
Easy Like Sunday Morning
|
|
indyjase
Junior Member
|
23. October 2008 @ 09:43 |
Link to this message
|
|
thankyou for taking the time to look that was very much appreciated!
Easy Like Sunday Morning
|
Senior Member
11 product reviews
|
23. October 2008 @ 14:36 |
Link to this message
|
Originally posted by indyjase:
thankyou for taking the time to look that was very much appreciated!
No problem at all.
Know how to drive a person CRAZY? <<Click Here>>
|
Newbie
|
23. October 2008 @ 17:31 |
Link to this message
|
One last thing you could try to repair your player, is to download the iso file for the firmware, burn it to a CD, then turn on your player and insert the CD containing the firmware. Keep your fingers crossed and hope it will recognize the CD and update the firmware.
|
|
indyjase
Junior Member
|
23. October 2008 @ 20:14 |
Link to this message
|
|
good idea except that when it gets bricked none of the buttons actually function anymore, which is a bugger!!! The disc tray wont even open and I took the bloody thing apart to see....good thinking though and thanks for your input.....
Easy Like Sunday Morning
|
|
mackdl
Senior Member
|
24. October 2008 @ 11:43 |
Link to this message
|
Yikes indyjase, I hope you didn't void your warranty by taking it apart?
Sometimes holding down the power button will shut off and reset the player. Then you can try to update again as Rocco96 suggested. AVS forum has instructions on how to "hexedit" to go to former firmware.
When updating, never shut off the player, it's suppose to do it on it's own after a successful update. The last step takes forever, do something else and let it do it's thing.
This message has been edited since posting. Last time this message was edited on 24. October 2008 @ 20:30
|
|
Advertisement
|
|
|
|
indyjase
Junior Member
|
28. October 2008 @ 11:32 |
Link to this message
|
well it caught me off guard because I was updating my samsung BD-1400 and the ethernet connection to the A3 has never worked before but well, it did this time!!!! and of cause I didnt bother to look at the instructions, having spent way too long before try to get the bloody thing to update! but no worries as they are going to fix it or tosh will replace it, so phew I am covered which is good as my local movie store has HDDVDs for $5.99 and under!
Easy Like Sunday Morning
|
