|
|
|
this is my 1st post. Im a little confused by the line in the fixes thread
|
|
|
tightarse
Newbie
|
30. November 2008 @ 20:01 |
Link to this message
|
Hi total noob here ive been reading the messages on this topic since the boxes went down and took note about code begging/wait for the guys to do there work etc etc so dont shoot me down before I start, this is my 1st post. Im a little confused by the line in the fixes thread:
EDIT: Starview Box 3 Fix - Sunday 30th @14.35 -> http://www.4shared.com/account/dir/30426...lmgFEBduDwF6e#/
I cant work out whether this fix is for all Starview boxes or just genuine ones or 3rd gen and I dont want to fry mine. I have a Starview clone, is the updated firmware for the clones included in this link and if so, which bin file do I need to upload to my clone box?
Cheers
|
|
Advertisement
|
  |
|
|
|
TheRuckas
Newbie
|
30. November 2008 @ 20:07 |
Link to this message
|
I think they need to do a specific firmware to each box, so far its been quick work so I wouldn't imagine it being a long wait but even if it was its worth it as they offer their advice and software up for free.
I've got a Staview 2 Box and I imagine there will be a specific software for that out soon, until then I won't install any other stuff onto my box and I suggest you do the same, especially as yours is a clone mate.
Hold back and see what happens, hopefully this thread can remain open.
|
|
malci
Suspended due to non-functional email address
|
1. December 2008 @ 09:15 |
Link to this message
|
Originally posted by tightarse:
Hi total noob here ive been reading the messages on this topic since the boxes went down and took note about code begging/wait for the guys to do there work etc etc so dont shoot me down before I start, this is my 1st post. Im a little confused by the line in the fixes thread:
EDIT: Starview Box 3 Fix - Sunday 30th @14.35 -> http://www.4shared.com/account/dir/30426...lmgFEBduDwF6e#/
I cant work out whether this fix is for all Starview boxes or just genuine ones or 3rd gen and I dont want to fry mine. I have a Starview clone, is the updated firmware for the clones included in this link and if so, which bin file do I need to upload to my clone box?
Cheers
The only Starview fix out at the moment is for the Starview 3 The Box Super (SV3) genuine, plus of course a few other box's, i am not very optimistic about a fix for any of the clones, but never say never, you never Know. All the fix's will be announced on here as and when they come out >>>
http://forums.afterdawn.com/thread_view.cfm/722659
|
|
dezzerbfc
Junior Member
|
1. December 2008 @ 12:53 |
Link to this message
|
"The only Starview fix out at the moment is for the Starview 3 The Box Super (SV3) genuine, plus of course a few other box's, i am not very optimistic about a fix for any of the clones, but never say never, you never Know. All the fix's will be announced on here as and when they come out"
malci can you shed any light on why you think the starview clone may not get a fix? I have had mine a couple of years now and besides the fact i've had to fettle it a couple of times it's been fine and still is!
I am really holding out hope that some techno genius will pull us clone owners out of the mire once again so come on boys you've done it before!! So let's have that clone fix!!
Cheers! Dez
|
|
Solo_007
Junior Member
|
1. December 2008 @ 12:58 |
Link to this message
|
Originally posted by dezzerbfc:
"The only Starview fix out at the moment is for the Starview 3 The Box Super (SV3) genuine, plus of course a few other box's, i am not very optimistic about a fix for any of the clones, but never say never, you never Know. All the fix's will be announced on here as and when they come out"
malci can you shed any light on why you think the starview clone may not get a fix? I have had mine a couple of years now and besides the fact i've had to fettle it a couple of times it's been fine and still is!
I am really holding out hope that some techno genius will pull us clone owners out of the mire once again so come on boys you've done it before!! So let's have that clone fix!!
Cheers! Dez
Same here mate im waiting on that fix also ..
Who would i donate too ? They deserve somthing outa this.
Good work
"Only God Can Judge Me"
|
|
Lisboa67
Member
|
1. December 2008 @ 14:13 |
Link to this message
|
Hi, Just hope someone can confirm my problem regards updating my eur0v0x max v (Black) i have the *removed*, in the files and fixes tab, eurovox fixes, eurovox max v, then the bottom NEW UFL..., is this the one i need to flash my box as i did in April? cheers.
This message has been edited since posting. Last time this message was edited on 1. December 2008 @ 14:16
|
Moderator
|
1. December 2008 @ 14:17 |
Link to this message
|
Originally posted by Lisboa67:
Hi, Just hope someone can confirm my problem regards updating my eur0v0x max v (Black) i have the *removed*, in the files and fixes tab, eurovox fixes, eurovox max v, then the bottom NEW UFL..., is this the one i need to flash my box as i did in April? cheers.
We do not entertain code/toolbar discussions here, just firmware updates; check back here regularly for progress/updates -> http://forums.afterdawn.com/thread_view.cfm/722659
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
tightarse
Newbie
|
2. December 2008 @ 17:48 |
Link to this message
|
|
ok thanks malci much appreciated. Still, I hope your wrong all the same! Ill keep my fingers crossed for the clone fix for a while yet before I throw my hard earned cash at a sly+ box
|
|
malci
Suspended due to non-functional email address
|
2. December 2008 @ 18:33 |
Link to this message
|
Originally posted by dezzerbfc:
"The only Starview fix out at the moment is for the Starview 3 The Box Super (SV3) genuine, plus of course a few other box's, i am not very optimistic about a fix for any of the clones, but never say never, you never Know. All the fix's will be announced on here as and when they come out"
malci can you shed any light on why you think the starview clone may not get a fix? I have had mine a couple of years now and besides the fact i've had to fettle it a couple of times it's been fine and still is!
I am really holding out hope that some techno genius will pull us clone owners out of the mire once again so come on boys you've done it before!! So let's have that clone fix!!
Cheers! Dez
Can't shed any light Dez, apart from what I said in my post, the fix's have really been a gesture of goodwill, and I hope that there is another somewhere along the line, but I am not optimistic!! but I did say Never say Never, cheers and good luck.
|
Senior Member
|
2. December 2008 @ 18:37 |
Link to this message
|
|
Evening Malci, I see your not burned out yet, been very busy here last few days.;)
|
|
malci
Suspended due to non-functional email address
|
2. December 2008 @ 18:41 |
Link to this message
|
Originally posted by anto1969:
Evening Malci, I see your not burned out yet, been very busy here last few days.;)
Evening Antoinette, yes it has but I have missed the last 36 hrs or so, had a complete PC crash when I got that sorted, lost all the bleeding TV and BB, just got back.
|
|
brian1939
Suspended due to non-functional email address
|
2. December 2008 @ 18:43 |
Link to this message
|
Originally posted by Lisboa67:
Hi, Just hope someone can confirm my problem regards updating my eur0v0x max v (Black) i have the *removed*, in the files and fixes tab, eurovox fixes, eurovox max v, then the bottom NEW UFL..., is this the one i need to flash my box as i did in April? cheers.
|
|
Advertisement
|
|
|
Senior Member
|
2. December 2008 @ 18:45 |
Link to this message
|
Originally posted by malci:
Originally posted by anto1969:
Evening Malci, I see your not burned out yet, been very busy here last few days.;)
Evening Antoinette, yes it has but I have missed the last 36 hrs or so, had a complete PC crash when I got that sorted, lost all the bleeding TV and BB, just got back.
So computer cracked before you! way to go pal;) glad your back!
|
|
