Originally posted by Celtic71:

---

Sorry to butt in but the b0x does NOT need to be jtagged

Here is the solution

Display 0

Its a hardware fault.

1.Remove the cap (c21) electrolytic near the ribbon on the psu board.
2.Boot the box , it should boot to on and function correctly , the psu will hum ignore it , just let it boot to ON ,then turn it back off.
3.Replace electrolytic cap (c11) 1000 mic @16v on the psu board , resolder (c21)
thats it done.

http://img89.imageshack.us/img89/725/svcapfixpnggv2.png

You can get caps from Maplins

---

Originally posted by sc0user:

---

Yes definitely change the C11 to a 16V, 25V will also do. First page of this very thread will give you all the info you need.

Go to Maplins and ask for an electrolytic 1000uF 16V cap. The part number is VH50E.

---

Originally posted by starfix:

---

i can fix that for u mate!

---