Hi guys my name is John and im kinda new to both ur site and burning/Copying dvds.I was wondering if u guys can help me out as im having problems trying to burn a dvd on both img burn and roxio easy cd and dvd.First i use dvd shrink to encode the dvd and get the image but if i go to burn it on roxio it comes up with this error
Sense: 05 ASC: 26 ASCQ: 00 (Command 55)
-------------------------------------------------------
Px.dll: 3.4.45.500
PxAFS.DLL: 3.4.45.500
pxdrv.dll: 1.2.3.0
PxMas.dll: 3.4.45.500
PxSFS.DLL: 3.4.45.500
PxWave.dll: 3.4.45.500
pxwma.dll: 1.0.0.3
and it says there was an error writing to the disc.Now if i try through img burn it comes up with this
HP DVD Writer 300c 9h04 (ATA)
Current Profile: DVD+RW
Physical Format Information (ADIP):
Disc ID: INFODISC-A10-01
Book Type: DVD+RW
Part Version: 2
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0
Physical Format Information (Last Recorded):
Disc ID: INFODISC-A10-01
Book Type: DVD-ROM Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0
Current Format Capacity:
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)
Maximum Format Capacity:
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)
and nothing happens when i try to write to the disc.now if i go to build mode it tells me that i need to convert the file to udf because its too big.My computer is a hp pavilion a522n and im running the dvd writer that came with it.Please help me out dont know what else to do was looking around ur site for answers but cant seem to find any would like somebody to guide me in the right direction.Hope all the info i gave u helps any help would be appreciated.Thanks John
Hey jo thanks for the reply it really helped came across another problem after my writer tried to burn this is what came up:
io error
device:[1:0:0]hp
dvd writer 300c 9h04(e)(ata)
scsi status :0x02
interpretation:Check condition
cdb:28 00 00 00 00 05 00 00 01 00
Interpretation:Read (10)Sector 5
Sense area:70 00 05 00 00 00 00 12 00 00 00 00 21 00 00 00 00 00 00 01 02 03 04 05
Interpretation:logical block address out of range
Read in another forum that somebody else was having the same problem and that they needed to update firmware but i tried to find an update and couldnt find one.would it be easier if i just go and get another dvd cd writer.Thanks John
