|
|
|
Urgent Help Needed - Jungle Flash Froze
|
|
|
WJ99
Senior Member
|
28. January 2009 @ 18:26 |
Link to this message
|
I am doing this part of the flash using JungleFlasher 0.0.43
"Write Verified OK ! in Running Log signals good write.
Now send an Outro to the drive.
This will release a drive from Vendor Mode and send ATA Reset to the Drive. It then sends an
inquiry command to the drive.
This will save you power cycling the drive and then changing port away and change it back
again, with the click of a button, drive will ?reset? itself and JungleFlasher will send an inquiry
command to the drive. If successfully flashed the drive should Inquire correctly and display
drive properties"
I have pressed the Outro button and JF has frozen? What do I do!?! This is my first flash
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
2 product reviews
|
28. January 2009 @ 18:34 |
Link to this message
|
If the write verified OK, You shouldn't have an issue with the drive. The OUTRO/ ATA Reset is simply there so you don't have to power cycle the drive after a flash. End task on JF and power cycle the drive, that should resolve your issue.
This message has been edited since posting. Last time this message was edited on 28. January 2009 @ 18:35
|
|
WJ99
Senior Member
|
28. January 2009 @ 18:37 |
Link to this message
|
Originally posted by leerage:
If the write verified OK, You shouldn't have an issue with the drive. The OUTRO/ ATA Reset is simply there so you don't have to power cycle the drive after a flash. End task on JF and power cycle the drive, that should resolve your issue.
First flash, how do you power cycle the drive on the xbox's? Sorry for such a stupid question
|
AfterDawn Addict
2 product reviews
|
28. January 2009 @ 18:39 |
Link to this message
|
Originally posted by WJ99:
Originally posted by leerage:
If the write verified OK, You shouldn't have an issue with the drive. The OUTRO/ ATA Reset is simply there so you don't have to power cycle the drive after a flash. End task on JF and power cycle the drive, that should resolve your issue.
First flash, how do you power cycle the drive on the xbox's? Sorry for such a stupid question
No problem... power cycling is simply removing the power cable, waiting a couple of seconds, and then plugging it back in. Keep in mind you are removing the power cable to the dvd drive, not the xbox itself. Are you using a connectivity kit or the xbox to power the drive?
This message has been edited since posting. Last time this message was edited on 28. January 2009 @ 18:40
|
|
WJ99
Senior Member
|
28. January 2009 @ 18:46 |
Link to this message
|
Originally posted by leerage:
Originally posted by WJ99:
Originally posted by leerage:
If the write verified OK, You shouldn't have an issue with the drive. The OUTRO/ ATA Reset is simply there so you don't have to power cycle the drive after a flash. End task on JF and power cycle the drive, that should resolve your issue.
First flash, how do you power cycle the drive on the xbox's? Sorry for such a stupid question
No problem... power cycling is simply removing the power cable, waiting a couple of seconds, and then plugging it back in. Keep in mind you are removing the power cable to the dvd drive, not the xbox itself. Are you using a connectivity kit or the xbox to power the drive?
Yes, I also have something called a magic bridge to just power the CK3 pro.
Can I just turn that off?
|
AfterDawn Addict
2 product reviews
|
28. January 2009 @ 18:49 |
Link to this message
|
Originally posted by WJ99:
Originally posted by leerage:
Originally posted by WJ99:
Originally posted by leerage:
If the write verified OK, You shouldn't have an issue with the drive. The OUTRO/ ATA Reset is simply there so you don't have to power cycle the drive after a flash. End task on JF and power cycle the drive, that should resolve your issue.
First flash, how do you power cycle the drive on the xbox's? Sorry for such a stupid question
No problem... power cycling is simply removing the power cable, waiting a couple of seconds, and then plugging it back in. Keep in mind you are removing the power cable to the dvd drive, not the xbox itself. Are you using a connectivity kit or the xbox to power the drive?
Yes, I also have something called a magic bridge to just power the CK3 pro.
Can I just turn that off?
Yes, all you simply need to do is cut the power to the dvd drive, wait a couple of seconds and then give the dvd drive power again, that in essence is a OUTRO/ATA Reset.
|
|
WJ99
Senior Member
|
28. January 2009 @ 18:50 |
Link to this message
|
Originally posted by leerage:
Originally posted by WJ99:
Originally posted by leerage:
Originally posted by WJ99:
Originally posted by leerage:
If the write verified OK, You shouldn't have an issue with the drive. The OUTRO/ ATA Reset is simply there so you don't have to power cycle the drive after a flash. End task on JF and power cycle the drive, that should resolve your issue.
First flash, how do you power cycle the drive on the xbox's? Sorry for such a stupid question
No problem... power cycling is simply removing the power cable, waiting a couple of seconds, and then plugging it back in. Keep in mind you are removing the power cable to the dvd drive, not the xbox itself. Are you using a connectivity kit or the xbox to power the drive?
Yes, I also have something called a magic bridge to just power the CK3 pro.
Can I just turn that off?
Yes, all you simply need to do is cut the power to the dvd drive, wait a couple of seconds and then give the dvd drive power again, that in essence is a OUTRO/ATA Reset.
The tray is still out from the flash. Can I press the eject button so it goes back in?
|
|
WJ99
Senior Member
|
28. January 2009 @ 18:55 |
Link to this message
|
Originally posted by leerage:
Originally posted by WJ99:
Originally posted by leerage:
Originally posted by WJ99:
Originally posted by leerage:
If the write verified OK, You shouldn't have an issue with the drive. The OUTRO/ ATA Reset is simply there so you don't have to power cycle the drive after a flash. End task on JF and power cycle the drive, that should resolve your issue.
First flash, how do you power cycle the drive on the xbox's? Sorry for such a stupid question
No problem... power cycling is simply removing the power cable, waiting a couple of seconds, and then plugging it back in. Keep in mind you are removing the power cable to the dvd drive, not the xbox itself. Are you using a connectivity kit or the xbox to power the drive?
Yes, I also have something called a magic bridge to just power the CK3 pro.
Can I just turn that off?
Yes, all you simply need to do is cut the power to the dvd drive, wait a couple of seconds and then give the dvd drive power again, that in essence is a OUTRO/ATA Reset.
Cheers mate, looks perfect. Your a star.
|
|
Advertisement
|
|
|
AfterDawn Addict
2 product reviews
|
28. January 2009 @ 19:00 |
Link to this message
|
Originally posted by WJ99:
Cheers mate, looks perfect. Your a star.
I'm glad I could help! Enjoy!!
This message has been edited since posting. Last time this message was edited on 28. January 2009 @ 19:01
|
|
