|
starview genuine wont stop updating?
|
|
|
liver05
Newbie
|
4. February 2009 @ 14:03 |
Link to this message
|
|
hi wonder if some one can help. i re-flashed my box in may last year and its worked fine, then a couple of months ago it stopped. now when i switch the box on it has a blank screen and says INFO and data is being updated, it goes upto 180% then thats it it stays there with a black screen behind it. iv tried re-flashing it but it doesnt change anything? i would really appreciate it if some one could help. cheers
|
|
Advertisement
|
 |
|
|
Member
|
4. February 2009 @ 14:49 |
Link to this message
|
Originally posted by liver05:
hi wonder if some one can help. i re-flashed my box in may last year and its worked fine, then a couple of months ago it stopped. now when i switch the box on it has a blank screen and says INFO and data is being updated, it goes upto 180% then thats it it stays there with a black screen behind it. iv tried re-flashing it but it doesnt change anything? i would really appreciate it if some one could help. cheers
the new flashes that were all done around christmas do seem to take while to kick in...try it on s#y 2 or sports 2.
live a little...you cant be old and wise if youre never young and crazy!
 |
Member
|
4. February 2009 @ 15:20 |
Link to this message
|
hi liver 05.it seems to me from reading your post that you need to update your firmware.there was a change at christmas.
jvob
|
|
liver05
Newbie
|
5. February 2009 @ 09:41 |
Link to this message
|
ok cheers i didnt know that! ha. where do i down load the new firmware from and whats it called? cheers.
|
Senior Member
|
5. February 2009 @ 09:48 |
Link to this message
|
|
You'll get it in eamo's library, look under scouser, karl, malci, noely, desb etc's signatures. You need the cryptview 1.5.
|
|
liver05
Newbie
|
5. February 2009 @ 10:17 |
Link to this message
|
|
i dont wanna sound to thick ere but how do you get into there libraries? cheers
|
AfterDawn Addict
|
5. February 2009 @ 10:22 |
Link to this message
|
Originally posted by liver05:
i dont wanna sound to thick ere but how do you get into there libraries? cheers
Under my beach ball.
Hi Eva :)
|
|
liver05
Newbie
|
5. February 2009 @ 10:30 |
Link to this message
|
ahh haa! got it, il try it out later, il let you know how i get on! thanx a lot guys.:)
|
Senior Member
|
5. February 2009 @ 11:20 |
Link to this message
|
Hi noely, you got much snow?
|
AfterDawn Addict
|
5. February 2009 @ 11:28 |
Link to this message
|
Originally posted by Evastar:
Hi noely, you got much snow?
Theres a good bit up this way, & i have the flu to go with it :(
|
Senior Member
|
6. February 2009 @ 06:18 |
Link to this message
|
|
Oh poor you! Are you at home sick?
Try making a drink with freshly squeezed orange juice, a squirt of lemon juice, a spoon of honey and boiling water! :)
|
|
shirleyv
Newbie
|
6. February 2009 @ 13:03 |
Link to this message
|
Hi,
Can anyone help, my genuine starview box has lost its channels. Is it a case of doing the same as above, if so which cryptstar do I use as I have downloaded it and have two versions core 257 and core 400.
Once I have updated it through the loader do I need to do anything else or will my channels be back again?
Cheers,
Leigh
|
|
malci
Suspended due to non-functional email address
|
6. February 2009 @ 14:00 |
Link to this message
|
Originally posted by shirleyv:
Hi,
Can anyone help, my genuine starview box has lost its channels. Is it a case of doing the same as above, if so which cryptstar do I use as I have downloaded it and have two versions core 257 and core 400.
Once I have updated it through the loader do I need to do anything else or will my channels be back again?
Cheers,
Leigh
When you say lost it's channels, have you tried a Factory re-set and fresh Installation, and rescan on your provider - As regards the Firmware if your box is not updating you can use either of those (It is the Latest for AU) for Starview 1, Core257 is for a clone box and Core400 is for a Genuine box, but the 257 is safe to use on your box if you have any doubt, don't forget to check and turn ON the key Emu.
|
|
shirleyv
Newbie
|
6. February 2009 @ 14:05 |
Link to this message
|
|
its lost all channels which have the dollar sign next to them. My box is a genuine one so use the 400 file and do a re-scan and all should be working again?
Leigh
|
AfterDawn Addict
|
6. February 2009 @ 15:05 |
Link to this message
|
Originally posted by Evastar:
Oh poor you! Are you at home sick?
Try making a drink with freshly squeezed orange juice, a squirt of lemon juice, a spoon of honey and boiling water! :)
lol Where's the whiskey eva?
|
|
malci
Suspended due to non-functional email address
|
6. February 2009 @ 17:19 |
Link to this message
|
Originally posted by shirleyv:
its lost all channels which have the dollar sign next to them. My box is a genuine one so use the 400 file and do a re-scan and all should be working again?
Leigh
Yes do that - and when you have finished it, don't forget to turn ON the Key Emu. Are you sure that it is turned ON at the minute? just check it to make sure.
|
|
shirleyv
Newbie
|
6. February 2009 @ 18:12 |
Link to this message
|
|
the key emu is definately on, I'll try the update now and let you know.
Cheers,
Leigh
|
|
malci
Suspended due to non-functional email address
|
6. February 2009 @ 18:22 |
Link to this message
|
Originally posted by shirleyv:
the key emu is definately on, I'll try the update now and let you know.
Cheers,
Leigh
When did you last update your box Leigh, is it recently?
|
|
shirleyv
Newbie
|
7. February 2009 @ 07:20 |
Link to this message
|
|
I last updated quite a few months ago. I have installed the new update and everything is working again. Thanks for your help, another happy customer...
Leigh
|
|
malci
Suspended due to non-functional email address
|
7. February 2009 @ 08:55 |
Link to this message
|
Originally posted by shirleyv:
I last updated quite a few months ago. I have installed the new update and everything is working again. Thanks for your help, another happy customer...
Leigh
Well done. yep it needed it then :) pleases your up and running.
|
|
liver05
Newbie
|
8. February 2009 @ 15:32 |
Link to this message
|
just a quick un, just sayin thanks for the help, i managed re-flash my box with the new firmware core400 and it works perfectly again! ha. cheers
|
|
bowside
Newbie
|
10. February 2009 @ 08:33 |
Link to this message
|
|
It was mentioned above that it can take a while for the update to happen, so how long should it take for the 0% to change to something else?
I have used the crypt1.5 core257 on my clone box from the 4shared link in the other guys signature, it loads it, and when I do a channel scan it only finds 72 instead of the 168 it used to get.
When I go to S*y 2 it says its updating but nothing happens, it sits at 0% for ages.
I checked the menu to make sure the Key EMU is on and I set the Default Key. Anyone know any other steps I should take after the flash?
Would doing a factory reset do anything after the flashing?
I am on u*c/n*l in southern ireland.
P.S. thanks for reading my signature, :P
|
Senior Member
|
10. February 2009 @ 09:27 |
Link to this message
|
|
You need to do a factory reset before you scan for channels.
|
|
bowside
Newbie
|
10. February 2009 @ 15:03 |
Link to this message
|
|
done the factory reset now, and the scan is up to 177 channels, thanks.
The update is still sitting at 0% for the last while. I'll leave it on tonight to see if it gets any updates.
P.S. thanks for reading my signature, :P
|
|
Advertisement
|
|
|
|
malci
Suspended due to non-functional email address
|
10. February 2009 @ 15:43 |
Link to this message
|
|
bowside - Don't do that, what you need to do is to go through the channels and find the strongest signal to update it, even try turning it off at the back for minute, then back on and go to SLY 2, Discovery Turbo - even the God Channels and see if it updates.
(Obviously you did of course put the Key Emu back on after your Factory Reset)
|
