|
|
|
Slow DVD Burner
|
|
|
joefuf
Newbie
|
18. February 2009 @ 16:02 |
Link to this message
|
Hey AfterDawn,
I bought my PC about 5 months ago and it has been working great. I was surprised I didn't hate Vista as much as I thought I would. The only issue I am having is that my DVD burner seems to have slowed down tremendously. It used to take just 5 minutes to burn a DVD and now it's on it's way up to 15. I am using some pretty standard disks (Staples brand), regular sized (4.7 GB 16X speed etc). I checked under the Device Manager and uninstalled the DVD burner driver and rebooted - not effect. I looked under the IDE/ATA controllers and found that the driver that pertains to my burner is called "NVIDIA nForce Serial ATA Controller." I was going to uninstall that and reboot but my HDD seems to also be connected to it - wasn't sure if it was a good idea or not to uninstall that. I looked at the DVD burner mode and it is set to DMA.
DVD Burner: HL-DT-ST ram.cfm" class="forum_link" target="_blank">DVD-RAM GH10L SCSI CdRom Device
Computer Info: Running Vista SP1 Home Premium, 32bit, AMD, 3GB RAM.
Also I've been using Nero 9 to burn things. I prefer it over ImgBurn, but if I need to switch software to fix the issue I will.
Thanks!
|
|
Advertisement
|
|
|
|
|
joefuf
Newbie
|
18. February 2009 @ 16:14 |
Link to this message
|
not sure what that thing in the burner name was but i'll try to post it again
HL-DT-ST ram.cfm" class="forum_link" target="_blank">DVD-RAM GH10L SCSI CdRom Device
|
AfterDawn Addict
|
18. February 2009 @ 16:22 |
Link to this message
|
Can you post your Nero burn log?
99% of all problems are between the computer and the chair.
|
|
joefuf
Newbie
|
18. February 2009 @ 16:33 |
Link to this message
|
Windows Vista 6.0
IA32
WinAspi: -
NT-SPTI used
Nero Version: 9.0.9.100
Internal Version: 9, 0, 9, 100
(Nero Express)
Recorder: <HL-DT-ST ram.cfm" class="forum_link" target="_blank">DVD-RAM GH10L> Version: FC0B - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVD-RAM GH10L >Version: FC0B - HA 1 TA 0 - 9.0.9.100
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
: WDC WD3200AAJS-65B4A 01.0 nvstor32 Port 2 ID 0 DMA: Off
: HL-DT-STDVD-RAM GH10L FC0B nvstor32 Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GH10L E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 1683MB (1724260kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.2.2009
UDF/ISO compilation
4:21:18 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
4:21:18 PM #2 Phase 112 File dlgbrnst.cpp, Line 1767
DVD-Video files reallocation started
4:21:18 PM #3 Phase 114 File dlgbrnst.cpp, Line 1767
DVD-Video files reallocation completed (no file modified)
4:21:18 PM #4 Text 0 File Isodoc.cpp, Line 6789
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
4:21:18 PM #5 Phase 111 File dlgbrnst.cpp, Line 1767
DVD-Video files sorted
4:21:18 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
4:21:18 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
4:21:18 PM #8 Text 0 File Burncd.cpp, Line 3563
Turn on Disc-At-Once, using DVD media
4:21:18 PM #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'
4:21:18 PM #10 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
4:21:18 PM #11 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
4:21:19 PM #12 Text 0 File DlgWaitCD.cpp, Line 312
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
4:21:19 PM #13 Text 0 File DlgWaitCD.cpp, Line 324
Write in overburning mode: NO (enabled: CD)
4:21:19 PM #14 Text 0 File DlgWaitCD.cpp, Line 2951
Recorder: HL-DT-ST DVD-RAM GH10L, Media type: DVD-R
Disc Manufacturer ID: <CMC MA> <G. AM3>
Disc Application Code: 64, Disc Physical Code: 193
4:21:19 PM #15 Text 0 File DlgWaitCD.cpp, Line 499
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:21:19 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 756
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [E: HL-DT-ST DVD-RAM GH10L]
--------------------------------------------------------------
4:21:19 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 958
Prepare [E: HL-DT-ST DVD-RAM GH10L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2286128 | 0 | 0x00
2286128 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
4:21:19 PM #18 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
4:21:19 PM #19 Text 0 File Burncd.cpp, Line 4362
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
4:21:19 PM #20 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
4:21:19 PM #21 Text 0 File Burncd.cpp, Line 4484
Cache writing successful.
4:21:19 PM #22 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
4:21:19 PM #23 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 16x (22,160 KB/s)
4:21:19 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2675
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:21:19 PM #25 Text 0 File DVDR.cpp, Line 3259
Recording mode: Sequential Recording Mode
4:21:19 PM #26 Text 0 File DVDR.cpp, Line 3413
Start write address at LBA 0
DVD high compatibility mode: Yes
4:21:19 PM #27 Text 0 File Cdrdrv.cpp, Line 10187
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 84 0D 12 98 99 90 00 .@....R.........
03 43 4D 43 20 4D 41 00 - 04 47 2E 20 41 4D 33 00 .CMC.MA..G..AM3.
05 88 80 00 00 00 02 00 - 06 09 0D 14 98 88 90 00 ................
07 88 80 00 00 00 00 00 - 08 07 17 0A 0E 09 04 00 ................
09 95 07 0D 0B 88 88 00 - 0A 80 00 00 00 00 10 00 ................
0B 06 17 15 B8 99 85 00 - 0C B8 9A 32 03 20 32 00 ...........2..2.
0D 00 00 D0 00 00 00 00 - 0E 09 1F 39 2F 25 1C 00 ...........9/%..
0F 50 19 29 19 89 B5 00 - 10 88 84 00 04 00 04 00 .P.)............
11 00 00 00 00 00 00 00 - 12 09 2B 37 2D 29 1B 00 ..........+7-)..
13 50 1D 2D 1F A6 B5 00 - 14 88 80 00 00 00 00 00 .P.-............
15 00 00 00 00 00 00 00 - 16 0B 45 3D 3B 1F 25 00 ..........E=;.%.
17 30 25 31 0D 8A B5 00 - 18 88 80 00 00 00 00 00 .0%1............
19 00 00 00 00 00 00 00 - 1A 0C 51 51 51 45 2D 00 ..........QQQE-.
1B 90 23 2D 19 79 B5 00 - 1C 88 80 00 00 00 00 00 ..#-.y..........
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:21:19 PM #28 Text 0 File DVDR.cpp, Line 3551
Reserved Track size: 2286128 (22E230h, 4465MB) -> return code 0
4:21:19 PM #29 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
4:23:13 PM #30 Text 0 File Cdrdrv.cpp, Line 1411
16:23:13.149 - E: HL-DT-ST DVD-RAM GH10L : Queue again later
4:32:49 PM #31 Text 0 File WriterStatus.cpp, Line 245
<E: HL-DT-ST DVD-RAM GH10L> start writing Lead-Out at LBA 2286128 (22E230h), length 0 blocks
4:33:01 PM #32 Text 0 File DVDR.cpp, Line 3819
EndDAO: Last written address was 2286127 (22E22Fh)
4:33:01 PM #33 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0
4:33:01 PM #34 Phase 37 File dlgbrnst.cpp, Line 1767
Burn process completed successfully at 16x (22,160 KB/s)
4:33:01 PM #35 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
4:33:07 PM #36 Text 0 File Cdrdrv.cpp, Line 11444
DriveLocker: UnLockVolume completed
4:33:07 PM #37 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
|
AfterDawn Addict
|
18. February 2009 @ 16:59 |
Link to this message
|
99% of all problems are between the computer and the chair.
|
|
joefuf
Newbie
|
18. February 2009 @ 20:35 |
Link to this message
|
Originally posted by dialysis1:
Quote:
: WDC WD3200AAJS-65B4A 01.0 nvstor32 Port 2 ID 0 DMA: Off
: HL-DT-STDVD-RAM GH10L FC0B nvstor32 Port 2 ID 1 DMA: Off
Turn on your DMA.
http://www.onthegosoft.com/dma_setting_nt.htm
I have Vista though (the link you gave me is directions for XP), so when I go to the controller that has to do with my DVD Burner it's the NVIDIA controller like I said in my first post. When I go to that the option to have it on DMA is already selected. The other controllers in the section of device manager have nothing to do with DMA options or my burner (as far as I can tell).
|
AfterDawn Addict
|
18. February 2009 @ 20:51 |
Link to this message
|
99% of all problems are between the computer and the chair.
|
|
joefuf
Newbie
|
18. February 2009 @ 20:58 |
Link to this message
|
my ATA Channel 0 and ATA Channel 1 say
Channel Properties
Supported Devices : 2
and then the box for Devices is blank for both - there is nothing there.
|
|
joefuf
Newbie
|
18. February 2009 @ 22:16 |
Link to this message
|
|
|
AfterDawn Addict
|
18. February 2009 @ 22:58 |
Link to this message
|
|
Deleted.
99% of all problems are between the computer and the chair.
This message has been edited since posting. Last time this message was edited on 18. February 2009 @ 22:59
|
|
varnull
Suspended permanently
|
18. February 2009 @ 23:40 |
Link to this message
|
*sniggers*
vista (drm central.. doesn't like people burning anything)
nero9 (total garbage)
HL-ST-DT whatever it is crap £0.75 oem junk burner (also rubbish)
cmc mag disks (as we all know.. guess what.. junk)
I'm going to have a coffee while I stop laughing... while I recover you could try the firmware update, but I would buy a real burner first.. I have seen these things burn 3 disks and die.
http://h10025.www1.hp.com/ewfrf/wc/gener...=reg_R1002_USEN
This message has been edited since posting. Last time this message was edited on 18. February 2009 @ 23:44
|
|
joefuf
Newbie
|
19. February 2009 @ 08:02 |
Link to this message
|
Originally posted by varnull:
*sniggers*
vista (drm central.. doesn't like people burning anything)
nero9 (total garbage)
HL-ST-DT whatever it is crap £0.75 oem junk burner (also rubbish)
cmc mag disks (as we all know.. guess what.. junk)
http://h10025.www1.hp.com/ewfrf/wc/gener...02_USEN
I will try this when I get home. Cheers man.
So since I can't really get a mac right now, I'm stuck with Vista.
Nero 9 I can replace, so what do you use, or what do you suggest I use?
Any suggestions for a good burner that is relatively cheap? I don't have much expendable cash right now the way the world is.
|
|
Advertisement
|
|
|
|
joefuf
Newbie
|
19. February 2009 @ 15:31 |
Link to this message
|
HL-DT-ST GH10L DVD-R/RW Drive Firmware Update
---------------------------
Your system does not meet the minimum requirements for this update.
Update has been cancelled. (9995)
Now what?
|
|
