|
Need help with flashing and spoofing HITACHI as SAMSUNG.
|
|
Junior Member
|
14. March 2009 @ 14:59 |
Link to this message
|
I've read a ton of guides and cannot find specific instructions for what I am trying to accomplish. Here is the situation...
I have a working Xbox 360 with a broken SAMSUNG MS28 drive. The internal components are messed up because the previous owned had a disc stuck in it and he forced it open. I have a HITACHI 59 that is working and I would like to put it in place of the SAMSUNG. These are the steps I need help with...
How do I extract the key from the Samsung? I have no experience with these drives. I don't have a VIA SATA but I have access to Intel ICH6 and NFORCE4 SATA. Will any of these work for extracting the key?
The second step is how do I inject this key into the HITACHI and spoof the Hitachi to appear as a SAMSUNG drive? I have searched and searched but I just get bits and pieces of information and nothing specific to my situation. Any help would be greatly appreciated.
"Objects behind Xbox 360 power brick may appear smaller than they actually are"
|
|
Advertisement
|
 |
|
|
Junior Member
|
14. March 2009 @ 16:43 |
Link to this message
|
I am in JungleFlasher. I have installed the IO drivers and this is what I am getting under the MTKFlash tab...
0x0170
VENDOR - BENQ
DEVICE - DVD DC DQ60
F/W 1.0b
RESERVED - Feb 7 2006
The outside of the drive clearly states MS25. Am I doing something wrong here? Please advise.
"Objects behind Xbox 360 power brick may appear smaller than they actually are"
|
AfterDawn Addict
2 product reviews
|
14. March 2009 @ 17:39 |
Link to this message
|
Originally posted by Dollaz:
I am in JungleFlasher. I have installed the IO drivers and this is what I am getting under the MTKFlash tab...
0x0170
VENDOR - BENQ
DEVICE - DVD DC DQ60
F/W 1.0b
RESERVED - Feb 7 2006
The outside of the drive clearly states MS25. Am I doing something wrong here? Please advise.
Change to a different SATA port, JF is probably seeing your DVD drive in your computer. Once you have extracted the samsung firmware, load that in the source under the firmware tool 32 tab. Do not autoload the samsung firmware. Instead either load ix1.51 for Hitachi or original Hitachi 59 firmware, and click spoof source to target.
As for flashing, I haven't used JF to flash a Hitachi so you might want to consult the tutorial provided with JF.
|
Junior Member
|
19. March 2009 @ 15:45 |
Link to this message
|
|
Bump. Still lost.
"Objects behind Xbox 360 power brick may appear smaller than they actually are"
|
AfterDawn Addict
2 product reviews
|
19. March 2009 @ 15:56 |
Link to this message
|
Personally I haven't ever had any luck with my ICH7 chipset. I know I have read where people disable and changed stuff in BIOS to get it to work. I have always just used a VIA card because I don't have to change anything. Your best shot is with the NFORCE4 SATA.
Is the 0x0170 on the ICH6?
|
Junior Member
|
19. March 2009 @ 16:20 |
Link to this message
|
Yeah, it's SATA port 2. SATA port 1 is identified as my HDD in Jungleflasher.
"Objects behind Xbox 360 power brick may appear smaller than they actually are"
|
Junior Member
|
21. March 2009 @ 18:57 |
Link to this message
|
Ok. I have extracted the key from the SAMSUNG no problems. How do I inject this key into the Hitachi drive and spoof it as a Samsung?
"Objects behind Xbox 360 power brick may appear smaller than they actually are"
|
AfterDawn Addict
2 product reviews
|
22. March 2009 @ 00:51 |
Link to this message
|
Load the original Samsung firmware in the Source in Jungle Flasher. Next load the ix 1.51 for your Hitachi version in the target. Click spoof, save the file, and then flash with JF.
|
|
Aernyll
Junior Member
|
8. August 2009 @ 14:42 |
Link to this message
|
Originally posted by leerage:
Load the original Samsung firmware in the Source in Jungle Flasher. Next load the ix 1.51 for your Hitachi version in the target. Click spoof, save the file, and then flash with JF.
how do you flash it exactly in JF what do i click upon....
|
AfterDawn Addict
2 product reviews
|
8. August 2009 @ 16:00 |
Link to this message
|
Originally posted by Aernyll:
Originally posted by leerage:
Load the original Samsung firmware in the Source in Jungle Flasher. Next load the ix 1.51 for your Hitachi version in the target. Click spoof, save the file, and then flash with JF.
how do you flash it exactly in JF what do i click upon....
You will want to review the Jungle Flasher tutorial.
|
Member
|
6. October 2009 @ 09:18 |
Link to this message
|
thanks for the jungle flasher tutorial leerage. was having trouble spoofing the hitachi
|
|
Advertisement
|
|
|
AfterDawn Addict
|
6. October 2009 @ 09:25 |
Link to this message
|
Originally posted by Aernyll:
Originally posted by leerage:
Load the original Samsung firmware in the Source in Jungle Flasher. Next load the ix 1.51 for your Hitachi version in the target. Click spoof, save the file, and then flash with JF.
how do you flash it exactly in JF what do i click upon....
.
jesus people. Do you need to be spoon fed everything?
Look something up.
need jtag help? Xbox 360 console repair? PM me or chat |
