|
|
|
unable to burn on 2 different drives
|
|
|
kingzfn
Newbie
|
25. March 2009 @ 21:53 |
Link to this message
|
Can someone please help me. I am unable to burn on 2 different drives.
1 is Sony DRU-500A
2 is HP 1040i (I loaded Lite On firmware to try to fix the problem)
I have tried different media and also different ribbon cable(swapped with my HDD)and still it doesn't get past the Writing Lead In stage and I don't see the buffer filling up.
Here is the IMGburn output file using my DRU-500A, I get the same result with my other drive.
I have tried changing the transfer mode to PIO mode and still nothing. Any help will be very much appreciated.
I 18:27:47 ImgBurn Version 2.3.2.0 started!
I 18:27:47 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 18:27:47 Total Physical Memory: 3,145,196 KB - Available: 2,471,944 KB
I 18:27:47 Initialising SPTI...
I 18:27:47 Searching for SCSI / ATAPI devices...
I 18:27:47 Found 1 DVD±RW, 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 Unknown!
I 18:31:08 Operation Started!
I 18:31:08 Source File: C:\7000.0.081212-1400_client_en-us_Ultimate-GB1CULXFRE_EN_DVD.iso
I 18:31:08 Source File Sectors: 1,653,813 (MODE1/2048)
I 18:31:08 Source File Size: 3,387,009,024 bytes
I 18:31:08 Source File Volume Identifier: GB1CULXFRE_EN_DVD
I 18:31:08 Source File Application Identifier: CDIMAGE 2.54 (01/01/2005 TM)
I 18:31:08 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 18:31:08 Source File File System(s): ISO9660 (Bootable), UDF (1.02)
I 18:31:08 Destination Device: [0:1:0] SONY DVD RW DRU-500A 2.1a (G:) (ATA)
I 18:31:08 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01) (Speeds: 2x, 2.4x, 4x)
I 18:31:08 Destination Media Sectors: 2,295,104
I 18:31:08 Write Mode: DVD
I 18:31:08 Write Type: DAO
I 18:31:08 Write Speed: 1x
I 18:31:08 Link Size: Auto
I 18:31:08 Test Mode: No
I 18:31:08 BURN-Proof: Enabled
I 18:31:09 Filling Buffer... (20 MB)
I 18:31:10 Writing LeadIn...
W 18:32:22 Failed to Write Sectors 2240 - 2271 - Power Calibration Area Error
W 18:32:22 Retrying (1 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (2 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (3 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (4 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (5 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (6 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (7 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (8 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (9 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (10 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (11 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (12 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (13 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (14 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (15 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (16 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (17 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (18 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (19 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
W 18:32:22 Retrying (20 of 20)...
W 18:32:22 Retry Failed - Invalid Address For Write
E 18:39:44 Failed to Write Sectors 2240 - 2271 - Power Calibration Area Error
I 18:39:44 Synchronising Cache...
I 18:39:45 Closing Track...
I 18:39:46 Finalising Disc...
E 18:39:47 Failed to Write Image!
E 18:39:47 Operation Failed! - Duration: 00:08:38
I 18:39:47 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
25. March 2009 @ 22:09 |
Link to this message
|
|
It would appear that your very old drive cannot correctly read this 16x media.
99% of all problems are between the computer and the chair.
|
|
kingzfn
Newbie
|
25. March 2009 @ 22:56 |
Link to this message
|
I've pretty much written that one off, which is why I picked up the HP 1040i.
Here is the output when I try to burn on that drive.
I 19:21:14 ImgBurn Version 2.3.2.0 started!
I 19:21:14 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 19:21:14 Total Physical Memory: 3,145,196 KB - Available: 2,394,672 KB
I 19:21:14 Initialising SPTI...
I 19:21:14 Searching for SCSI / ATAPI devices...
I 19:21:14 Found 1 DVD±RW, 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 Unknown!
I 19:21:20 Operation Started!
I 19:21:20 Device: [0:0:0] LITE-ON DVDRW LH-20A1H LL0C (D:) (ATA)
I 19:21:20 Media Type: DVD-RW (Disc ID: CMCW02) (Speeds: 2x)
I 19:21:20 Quick Erase: Yes
I 19:21:20 Erasing Disc...
I 19:22:34 Operation Successfully Completed! - Duration: 00:01:13
I 19:22:35 Operation Started!
I 19:22:35 Source File: C:\7000.0.081212-1400_client_en-us_Ultimate-GB1CULXFRE_EN_DVD.iso
I 19:22:35 Source File Sectors: 1,653,813 (MODE1/2048)
I 19:22:35 Source File Size: 3,387,009,024 bytes
I 19:22:35 Source File Volume Identifier: GB1CULXFRE_EN_DVD
I 19:22:35 Source File Application Identifier: CDIMAGE 2.54 (01/01/2005 TM)
I 19:22:35 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 19:22:35 Source File File System(s): ISO9660 (Bootable), UDF (1.02)
I 19:22:35 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1H LL0C (D:) (ATA)
I 19:22:35 Destination Media Type: DVD-RW (Disc ID: CMCW02) (Speeds: 2x)
I 19:22:35 Destination Media Sectors: 2,297,888
I 19:22:35 Write Mode: DVD
I 19:22:35 Write Type: DAO
I 19:22:35 Write Speed: 1x
I 19:22:35 Link Size: Auto
I 19:22:35 Test Mode: No
I 19:22:35 BURN-Proof: Enabled
I 19:22:35 Filling Buffer... (20 MB)
I 19:22:36 Writing LeadIn...
I 19:23:17 Writing Image... (LBA: 0 - 1653812)
I 19:44:20 Synchronising Cache...
I 19:45:02 Image MD5: 773fc9cc60338c612af716a2a14f177d
I 19:45:02 Operation Successfully Completed! - Duration: 00:22:27
I 19:45:02 Average Write Rate: 2,620 KB/s (1.9x) - Maximum Write Rate: 2,704 KB/s (2.0x)
I 19:48:02 Operation Started!
I 19:48:02 Source File: C:\7000.0.081212-1400_client_en-us_Ultimate-GB1CULXFRE_EN_DVD.iso
I 19:48:02 Source File Sectors: 1,653,813 (MODE1/2048)
I 19:48:02 Source File Size: 3,387,009,024 bytes
I 19:48:02 Source File Volume Identifier: GB1CULXFRE_EN_DVD
I 19:48:02 Source File Application Identifier: CDIMAGE 2.54 (01/01/2005 TM)
I 19:48:02 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 19:48:02 Source File File System(s): ISO9660 (Bootable), UDF (1.02)
I 19:48:02 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1H LL0C (D:) (ATA)
I 19:48:02 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 2x, 4x, 6x, 8x, 12x, 16x, 18x, 20x)
I 19:48:02 Destination Media Sectors: 2,298,496
I 19:48:02 Write Mode: DVD
I 19:48:02 Write Type: DAO
I 19:48:02 Write Speed: 1x
I 19:48:02 Link Size: Auto
I 19:48:02 Test Mode: No
I 19:48:02 BURN-Proof: Enabled
I 19:48:02 Filling Buffer... (20 MB)
I 19:48:02 Writing LeadIn...
W 19:48:32 Failed to Write Sectors 32 - 63 - Command Sequence Error
W 19:48:32 Retrying (1 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (2 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (3 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (4 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (5 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (6 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (7 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (8 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (9 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (10 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (11 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (12 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (13 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (14 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (15 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (16 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (17 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (18 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (19 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
W 19:48:32 Retrying (20 of 20)...
W 19:48:32 Retry Failed - Command Sequence Error
E 19:48:40 Failed to Write Sectors 32 - 63 - Command Sequence Error
I 19:48:40 Synchronising Cache...
E 19:48:41 Failed to Write Image!
E 19:48:41 Operation Failed! - Duration: 00:00:39
I 19:48:41 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)
|
AfterDawn Addict
|
26. March 2009 @ 07:35 |
Link to this message
|
Update your firmware to LL0D and try burning at 8x.
99% of all problems are between the computer and the chair.
|
|
kingzfn
Newbie
|
26. March 2009 @ 22:34 |
Link to this message
|
I updated the firmware to LLOD and burned at 8x, this was the result. I tried 2 differnt media types.
I 18:42:18 ImgBurn Version 2.3.2.0 started!
I 18:42:18 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 18:42:18 Total Physical Memory: 3,145,196 KB - Available: 2,389,880 KB
I 18:42:18 Initialising SPTI...
I 18:42:18 Searching for SCSI / ATAPI devices...
I 18:42:18 Found 1 DVD±RW, 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 Unknown!
I 18:43:03 Operation Started!
I 18:43:03 Source File: C:\THE_OFFICE_S4D1.iso
I 18:43:03 Source File Sectors: 2,270,904 (MODE1/2048)
I 18:43:03 Source File Size: 4,650,811,392 bytes
I 18:43:03 Source File Volume Identifier: THE_OFFICE_S4D1
I 18:43:03 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
I 18:43:03 Source File Implementation Identifier: mkisofs
I 18:43:03 Source File File System(s): ISO9660, UDF (1.02)
I 18:43:03 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1H LL0D (D:) (ATA)
I 18:43:03 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 2x, 4x, 6x, 8x, 12x, 16x, 18x, 20x)
I 18:43:03 Destination Media Sectors: 2,298,496
I 18:43:03 Write Mode: DVD
I 18:43:03 Write Type: DAO
I 18:43:03 Write Speed: 8x
I 18:43:03 Link Size: Auto
I 18:43:03 Test Mode: No
I 18:43:03 BURN-Proof: Enabled
I 18:43:03 Filling Buffer... (20 MB)
I 18:43:04 Writing LeadIn...
W 18:43:59 Failed to Write Sectors 32 - 63 - Command Sequence Error
W 18:43:59 Retrying (1 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (2 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (3 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (4 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (5 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (6 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (7 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (8 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (9 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (10 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (11 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (12 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (13 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (14 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (15 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (16 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (17 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (18 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (19 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
W 18:43:59 Retrying (20 of 20)...
W 18:43:59 Retry Failed - Command Sequence Error
E 18:44:15 Failed to Write Sectors 32 - 63 - Command Sequence Error
I 18:44:15 Synchronising Cache...
E 18:44:16 Failed to Write Image!
E 18:44:16 Operation Failed! - Duration: 00:01:13
I 18:44:16 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)
I 18:44:51 Operation Started!
I 18:44:51 Source File: C:\THE_OFFICE_S4D1.iso
I 18:44:51 Source File Sectors: 2,270,904 (MODE1/2048)
I 18:44:51 Source File Size: 4,650,811,392 bytes
I 18:44:51 Source File Volume Identifier: THE_OFFICE_S4D1
I 18:44:51 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
I 18:44:51 Source File Implementation Identifier: mkisofs
I 18:44:51 Source File File System(s): ISO9660, UDF (1.02)
I 18:44:51 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1H LL0D (D:) (ATA)
I 18:44:51 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)
I 18:44:51 Destination Media Sectors: 2,295,104
I 18:44:51 Write Mode: DVD
I 18:44:51 Write Type: DAO
I 18:44:51 Write Speed: 8x
I 18:44:51 Link Size: Auto
I 18:44:51 Test Mode: No
I 18:44:51 BURN-Proof: Enabled
I 18:44:51 Filling Buffer... (20 MB)
I 18:44:51 Writing LeadIn...
W 18:45:53 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
W 18:45:53 Retrying (1 of 20)...
W 18:46:58 Retry Failed - Power Calibration Area Error
W 18:46:58 Retrying (2 of 20)...
I 18:47:59 Abort Request Acknowledged
W 18:48:00 Retry Failed - Power Calibration Area Error
W 18:48:00 Retrying (3 of 20)...
W 18:49:01 Retry Failed - Power Calibration Area Error
W 18:49:01 Retrying (4 of 20)...
W 18:50:02 Retry Failed - Power Calibration Area Error
W 18:50:02 Retrying (5 of 20)...
W 18:51:06 Retry Failed - Power Calibration Area Error
W 18:51:06 Retrying (6 of 20)...
W 18:52:10 Retry Failed - Power Calibration Area Error
W 18:52:10 Retrying (7 of 20)...
W 18:53:12 Retry Failed - Power Calibration Area Error
W 18:53:12 Retrying (8 of 20)...
W 18:54:12 Retry Failed - Power Calibration Area Error
W 18:54:12 Retrying (9 of 20)...
W 18:55:11 Retry Failed - Power Calibration Area Error
W 18:55:11 Retrying (10 of 20)...
W 18:56:13 Retry Failed - Power Calibration Area Error
W 18:56:13 Retrying (11 of 20)...
W 18:57:17 Retry Failed - Power Calibration Area Error
W 18:57:17 Retrying (12 of 20)...
W 18:58:17 Retry Failed - Power Calibration Area Error
W 18:58:17 Retrying (13 of 20)...
W 18:59:17 Retry Failed - Power Calibration Area Error
W 18:59:17 Retrying (14 of 20)...
W 19:00:18 Retry Failed - Power Calibration Area Error
W 19:00:18 Retrying (15 of 20)...
W 19:01:16 Retry Failed - Power Calibration Area Error
W 19:01:16 Retrying (16 of 20)...
W 19:02:16 Retry Failed - Power Calibration Area Error
W 19:02:16 Retrying (17 of 20)...
W 19:03:15 Retry Failed - Power Calibration Area Error
W 19:03:15 Retrying (18 of 20)...
W 19:04:17 Retry Failed - Power Calibration Area Error
W 19:04:17 Retrying (19 of 20)...
W 19:05:19 Retry Failed - Power Calibration Area Error
W 19:05:19 Retrying (20 of 20)...
W 19:06:18 Retry Failed - Power Calibration Area Error
E 19:27:12 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
I 19:27:12 Synchronising Cache...
I 19:27:13 Closing Track...
I 19:27:14 Finalising Disc...
E 19:27:15 Failed to Write Image!
E 19:27:15 Operation Aborted! - Duration: 00:42:24
I 19:27:15 Average Write Rate: N/A - Maximum Write Rate: N/A
|
AfterDawn Addict
|
27. March 2009 @ 08:06 |
Link to this message
|
99% of all problems are between the computer and the chair.
This message has been edited since posting. Last time this message was edited on 27. March 2009 @ 08:13
|
|
kingzfn
Newbie
|
27. March 2009 @ 11:27 |
Link to this message
|
I'm still getting the same message:
I 08:15:40 ImgBurn Version 2.4.2.0 started!
I 08:15:40 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 08:15:40 Total Physical Memory: 3,145,196 KB - Available: 2,219,496 KB
I 08:15:40 Initialising SPTI...
I 08:15:40 Searching for SCSI / ATAPI devices...
I 08:15:40 Found 1 DVD±RW, 1 DVD±RW/RAM, 1 BD-ROM/HD DVD-ROM and 1 Unknown!
I 08:16:20 Operation Started!
I 08:16:20 Source File: C:\THE_OFFICE_S4D1.iso
I 08:16:20 Source File Sectors: 2,270,904 (MODE1/2048)
I 08:16:20 Source File Size: 4,650,811,392 bytes
I 08:16:20 Source File Volume Identifier: THE_OFFICE_S4D1
I 08:16:20 Source File Volume Set Identifier: 48AC54FA0000001E
I 08:16:20 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
I 08:16:20 Source File Implementation Identifier: mkisofs
I 08:16:20 Source File File System(s): ISO9660, UDF (1.02)
I 08:16:20 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1H LL0D (D:) (ATA)
I 08:16:20 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)
I 08:16:20 Destination Media Sectors: 2,295,104
I 08:16:20 Write Mode: DVD
I 08:16:20 Write Type: DAO
I 08:16:20 Write Speed: 8x
I 08:16:20 DVD+R Reserve Track: No
I 08:16:20 Link Size: Auto
I 08:16:20 Test Mode: No
I 08:16:20 OPC: No
I 08:16:20 BURN-Proof: Enabled
I 08:16:20 Book Type Setting: DVD-ROM
I 08:16:20 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 08:16:20 Filling Buffer... (40 MB)
I 08:16:21 Writing LeadIn...
W 08:17:19 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error
W 08:17:19 Retrying (1 of 20)...
W 08:18:19 Retry Failed - Reason: Power Calibration Area Error
W 08:18:19 Retrying (2 of 20)...
W 08:19:18 Retry Failed - Reason: Power Calibration Area Error
W 08:19:18 Retrying (3 of 20)...
W 08:20:18 Retry Failed - Reason: Power Calibration Area Error
W 08:20:18 Retrying (4 of 20)...
W 08:21:19 Retry Failed - Reason: Power Calibration Area Error
W 08:21:19 Retrying (5 of 20)...
W 08:22:22 Retry Failed - Reason: Power Calibration Area Error
W 08:22:22 Retrying (6 of 20)...
|
AfterDawn Addict
|
27. March 2009 @ 12:19 |
Link to this message
|
|
Try cleaning the laser but it looks like a bad drive.
99% of all problems are between the computer and the chair.
|
|
Advertisement
|
|
|
|
kingzfn
Newbie
|
27. March 2009 @ 20:58 |
Link to this message
|
|
OK thanks for your help.
|
|
