|
|
|
Datasafe Ritek G04 4x DVD-R will only burn at 1X on a Pioneer DVD-104
|
|
|
dplant123
Account closed as per user's own request
|
14. March 2004 @ 02:03 |
Link to this message
|
|
HI Does anyone know if there is any problems burning Datasafe Ritek G04 4x DVD-R at 2x on a Pioneer DVD-104. My machine is giving me error and fail messages when i try to burn these disks at any speed other than 1x eg max or 2x,
I am using Pioneer DVD-104, Firmware 1.31, copy to DVD for burning on a Win XP machine
Thanks
|
|
Advertisement
|
 |
|
|
|
LeeFields
Suspended due to non-functional email address
|
17. March 2004 @ 01:19 |
Link to this message
|
|
Dont use 4x disks in the 104, there is a bug in the firmware that can screw up the drive. Stick to 2x, Ritek Arita G03's are really cheap right now.
The Phantom Baw Flinger stikes again! Wuh Ha Ha!!
|
|
dplant123
Account closed as per user's own request
|
17. March 2004 @ 02:00 |
Link to this message
|
|
Many thanks - are Ritek Arita G03's good for burning movies?
ta
|
|
drchips
Senior Member
|
17. March 2004 @ 03:07 |
Link to this message
|
Hiya dplant123,
You could also upgrade the firmware of your drive to give it support for 4X media.
Here is a quote from Pioneer:Quote:
Update Information
DVR-A04/104 Firmware Update Information
Version: 1.41
Posted 12/5/2002
(from Ver1.40 to Ver1.41)
DVD-R/RW Writability Additional Improvement
CD-R/RW Writability Additional Improvement
(from Ver1.33 to Ver1.41)
Supports 2X writing on New 4X DVD-R media
Supports 2X writing on NEW SONY DVD-R Media
DVD-R/RW Writability Improvement
CD-R/RW Writability Improvement
(previous version 1.33)
Revision handling for writing high speed media
DVD-R/RW Writability Improvement
DVD-R/RW Playability Improvement
CD-R/RW Writability Improvement
CD-DA Playability Improvement
Support 2X writing on CMC DVD-R Media
We advise that you should only perform this update if you are experiencing problems with DVD-R or DVD-RW writing.
These updates are specific to DVD-R/RW For General Version 2.0 media use.
If you are using older DVD-R for general Version 1.1 media it is recommended that you use up all this media before updating the firmware as after doing so this media may no longer be recognised by the writer or writing software being used. After the FW update only use DVD-R/RW For General Version 2.0 media. This will ensure that the writer provides optimum performance.
It is imperative to perform the FW update before using 4x DVD-R or 2x DVD-RW For General Version 2.0 media
Uploading the firmware via DOS:
If the firmware uploader can not recognise the DVR-A04/104 or fails when run from within Windows after several attempts, the solution in most cases is to boot the system via a Windows 98 or Me floppy into DOS and then run the update program from a DOS prompt. When the uploader runs in windows it creates a folder on C:\dvra04\Fwxxx (xxx=the firmware version number) there you will find the uploader program UPGDVD.exe and two other files. First copy all 3 files in the \Fwxxx directory to a blank floppy. Then after booting the system into DOS from a Windows 98 or Me floppy remove this and insert the floppy you copied the files to and run the UPGDVD.exe uploader program.
This procedure will only work when the DVR-A04/104 is connected to an IDE port (not when it is external in an IEEE1394 Firewire or USB 2.0 case). It is preferable not to have any other drive daisy chained with the DVR-A04/104 when performing the firmware upload.
The firmware upgrade is available from here:
http://www.pioneeraus.com.au/computer/firmware.html
I run 1.4 firmware on my A04 without any problems at all with high speed media.
Have Fun....
Life is just more of the same:
|
|
dplant123
Account closed as per user's own request
|
17. March 2004 @ 04:19 |
Link to this message
|
|
Hi
I had 1.41 on my drive before but was unable to burn at 2X even with that. Are you able to burn at 2X using 1.41 with the Pioneer 104?
Thanks
D
|
|
drchips
Senior Member
|
17. March 2004 @ 04:56 |
Link to this message
|
|
Yes,
on Verbatim Advanced Meta AZO disks, and Ritek G04, with no problems whatsoever...
Have Fun..
Life is just more of the same:
|
|
dplant123
Account closed as per user's own request
|
17. March 2004 @ 05:30 |
Link to this message
|
Weird, because I just re upgraded to 1.41 and was unable to burn at 2X or have the RW's working.
Please see below for the log file from Nero re the RW burning. Any help would be appriciated.
thanks
Dave Plant
5502-0453-8009-5417-0564-1091
Windows XP 5.1
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21/12/2003 03:26:59
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 25/06/2002 17:34:54
Nero Version: 5.5.9.17 (Nero Express)
Recorder: <PIONEER DVD-RW DVR-104> Version: 1.41 - HA 1 TA 0 - 5.5.9.17
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DV-5800A> Version: 1.0A - HA 1 TA 1 - 5.5.9.17
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-75CCB0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200BB-00DWA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DV-5800A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 61865984 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523276kB)
Free physical memory: 290MB (297664kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
17.3.2004
ISO compilation
15:24:51 #1 Text 0 File Isodoc.cpp, Line 7050
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
15:24:52 #2 Phase 111 File dlgbrnst.cpp, Line 1574
DVD-Video files sorted
15:24:52 #3 Text 0 File Reader.cpp, Line 115
Reader running
15:24:52 #4 Text 0 File Writer.cpp, Line 126
Writer PIONEER DVD-RW DVR-104 running
15:24:52 #5 ISO9660GEN -11 File geniso.cpp, Line 4485
First writeable address = 0 (0x00000000)
15:24:52 #6 Text 0 File Burncd.cpp, Line 3597
Turn on Disc-At-Once, using DVD media
15:24:52 #7 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2150848 (2150848) = #2150848/477:57.73
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
15:25:36 #8 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 2298495 (510:48.45)
Last address to be written: 2150847 (477:59.72)
15:25:36 #9 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE
15:25:36 #10 Text 0 File DlgWaitCD.cpp, Line 1420
Recorder: PIONEER DVD-RW DVR-104;
CDRW code: 00 00 00 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
15:25:36 #11 Text 0 File ThreadedTransferInterface.cpp, Line 811
Prepare recorder PIONEER DVD-RW DVR-104 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 110276608
15:25:36 #12 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2150848 (2150848) = #2150848/477:57.73
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2150848 blocks [PIONEER DVD-RW DVR-104 ]
--------------------------------------------------------------
15:25:36 #13 Phase 24 File dlgbrnst.cpp, Line 1574
Caching of files started
15:25:37 #14 Phase 25 File dlgbrnst.cpp, Line 1574
Caching of files completed
15:25:37 #15 Phase 36 File dlgbrnst.cpp, Line 1574
Burn process started at 1x (1,380 KB/s)
15:25:37 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1953
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
15:25:37 #17 Text 0 File Mmc.cpp, Line 16757
Set BUFE: supported -> ON
15:25:37 #18 Text 0 File Cdrdrv.cpp, Line 7293
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) exist
15:25:38 #19 Text 0 File Writer.cpp, Line 317
15:25:38.984 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 47msec)
15:25:55 #20 SCSI -1183 File Cdrdrv.cpp, Line 1388
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x023D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x08 (KEY_BLANK_CHECK)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x08 0xFF 0xFF 0xF4 0x10 0x0E
0x00 0x00 0x00 0x00 0x00 0x00
15:25:55 #21 CDR -1183 File Writer.cpp, Line 334
Blank check command error
15:25:55 #22 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
15:25:55 #23 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader
15:25:56 #24 Phase 38 File dlgbrnst.cpp, Line 1574
Burn process failed at 1x (1,380 KB/s)
15:25:56 #25 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21/12/2003 03:26:58
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 08:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
drchips
Senior Member
|
17. March 2004 @ 05:44 |
Link to this message
|
Hiya,Quote:
Multisession : TRUE
Multisession type: : Start multisession
MULTISESSION DVD VIDEO IS NOT SUPPORTED!!!!Quote:
CDRW code: 00 00 00 00; CD manufacturer unknown
Are you SURE you are using Ritek???
Very suspicious!!!
have Fun...
Life is just more of the same:
|
|
dplant123
Account closed as per user's own request
|
17. March 2004 @ 05:50 |
Link to this message
|
|
Hi,
Sorry, the logfile is from a DataSafe DVD-RW I bought not the Ritek 04 DVD-R's - I am have a speed prob with the dvd-r's and the DVD-RW's simply won't burn
|
|
dplant123
Account closed as per user's own request
|
17. March 2004 @ 06:26 |
Link to this message
|
|
This is the logfile from the Ritek 04 DVD-R whcih did not burn at 2X using firmaware 1.41 on the pioneer 104. Thanks
D
Dave Plant
5502-0453-8009-5417-0564-1091
Windows XP 5.1
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21/12/2003 03:26:59
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 25/06/2002 17:34:54
Nero Version: 5.5.9.17
Recorder: <PIONEER DVD-RW DVR-104> Version: 1.41 - HA 1 TA 0 - 5.5.9.17
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DV-5800A> Version: 1.0A - HA 1 TA 1 - 5.5.9.17
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-75CCB0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200BB-00DWA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DV-5800A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: ?
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 61865984 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523276kB)
Free physical memory: 216MB (221704kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
17.3.2004
DVD-Copy on the fly
15:53:39 #1 SCSI -1189 File Cdrdrv.cpp, Line 1184
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x02
CDB Data: 0xBB 0x00 0x2C 0xD1 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x02
15:53:39 #2 Text 0 File Reader.cpp, Line 115
Reader running
15:53:39 #3 Text 0 File Writer.cpp, Line 126
Writer PIONEER DVD-RW DVR-104 running
15:53:39 #4 Text 0 File Burncd.cpp, Line 3597
Turn on Disc-At-Once, using DVD media
15:53:39 #5 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (original item values)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2298496 (2298496) = #2298496/510:46.46
not relocatable, CD pos for caching/writing not required/not required, no patch infos
--------------------------------------------------------------
15:53:40 #6 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 2298495 (510:48.45)
Last address to be written: 2298495 (510:48.45)
15:53:40 #7 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE
15:53:40 #8 Text 0 File DlgWaitCD.cpp, Line 1420
Recorder: PIONEER DVD-RW DVR-104;
CDRW code: 00 00 00 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
15:53:40 #9 Text 0 File ThreadedTransferInterface.cpp, Line 811
Prepare recorder PIONEER DVD-RW DVR-104 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 412659712
15:53:40 #10 Text 0 File ThreadedTransferInterface.cpp, Line 659
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 Data (mode 1))
2 indices, index0 (150) not provided
original CD pos #0 + 2298496 (2298496) = #2298496/510:46.46
not relocatable, CD pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2298496 blocks [PIONEER DVD-RW DVR-104 ]
--------------------------------------------------------------
15:53:40 #11 Phase 32 File dlgbrnst.cpp, Line 1574
Simulation started at 2x (2,760 KB/s)
15:53:41 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1953
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0
15:53:41 #13 Text 0 File Mmc.cpp, Line 16757
Set BUFE: supported -> ON
15:53:41 #14 Text 0 File Cdrdrv.cpp, Line 7293
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
15:53:41 #15 Text 0 File DVDCopy.cpp, Line 166
DVDCopy: Source-Media-Type : 32 - Start of Dirty CD to DVDCopy
15:53:55 #16 Text 0 File Writer.cpp, Line 317
15:53:55.468 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:21:23 #17 SCSI -1093 File Cdrdrv.cpp, Line 1184
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x050BA000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x28 0x00 0x00 0x22 0x42 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00
16:21:23 #18 Text 0 File DVDCopy.cpp, Line 179
DVDCopy: Start of Dirty-Read at LBA2245152
16:21:23 #19 Text 0 File Writer.cpp, Line 317
16:21:23.281 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:21:25 #20 Text 0 File Writer.cpp, Line 317
16:21:25.046 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:21:25 #21 Text 0 File Writer.cpp, Line 317
16:21:25.093 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:21:25 #22 Text 0 File Writer.cpp, Line 317
16:21:25.125 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:21:25 #23 Text 0 File Writer.cpp, Line 317
16:21:25.343 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:21:25 #24 Text 0 File Writer.cpp, Line 317
16:21:25.390 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:21:25 #25 Text 0 File Writer.cpp, Line 317
16:21:25.437 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:21:25 #26 Text 0 File Writer.cpp, Line 317
16:21:25.734 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:21:25 #27 Text 0 File Writer.cpp, Line 317
16:21:25.781 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:21:26 #28 Text 0 File Writer.cpp, Line 317
16:21:26.078 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:21:26 #29 Text 0 File Writer.cpp, Line 317
16:21:26.125 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:21:26 #30 Text 0 File Writer.cpp, Line 317
16:21:26.468 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:22:21 #31 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
16:22:28 #32 Phase 33 File dlgbrnst.cpp, Line 1574
Simulation completed successfully at 2x (2,760 KB/s)
16:22:37 #33 Phase 36 File dlgbrnst.cpp, Line 1574
Burn process started at 2x (2,760 KB/s)
16:22:37 #34 Text 0 File ThreadedTransferInterface.cpp, Line 1953
Verifying CD position of item 0 (not relocatable, no CD pos, no patch infos, orig at #0): write at #0
16:22:37 #35 Text 0 File Mmc.cpp, Line 16757
Set BUFE: supported -> ON
16:22:37 #36 Text 0 File Cdrdrv.cpp, Line 7293
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
16:22:37 #37 Text 0 File Writer.cpp, Line 317
16:22:37.843 - PIONEER DVD-RW DVR-104 : Queue again later (Intervall : 23msec)
16:22:45 #38 SCSI -1106 File Cdrdrv.cpp, Line 1388
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02380000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x73 0x03
16:22:45 #39 DVDR -1106 File Writer.cpp, Line 334
Power calibration error
16:22:46 #40 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
16:22:46 #41 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader
16:22:46 #42 Phase 38 File dlgbrnst.cpp, Line 1574
Burn process failed at 2x (2,760 KB/s)
16:22:46 #43 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21/12/2003 03:26:58
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 08:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
drchips
Senior Member
|
17. March 2004 @ 06:43 |
Link to this message
|
Life is just more of the same:
|
|
dplant123
Account closed as per user's own request
|
17. March 2004 @ 07:08 |
Link to this message
|
|
Hi
Using DVDINFO (thanks for the heads up) I have got the info on both disks. Please find the DRD-RW first and the DVD-R second.
Thanks
Dave
Region information N/A not a DVD-VIDEO
Media code/Manufacturer ID RITEKW01
Format Capacity Not Formatted
Free Blocks 411107328
Free Capacity 4.38GB(4.71GB)
Book Type DVD-RW
Media Type DVD-RW
Media Id Code Speed 2.0x 2770KBps
Available Write Descriptor CLV 1.0x 1385KBps
Write Strategy Speed 2.0x 2770KBps
Data area starting sector 30000h
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1
DVD-R MEDIA INFO
Media Information
Region information N/A not a DVD-VIDEO
Media code/Manufacturer ID RITEKG04
Format Capacity Not Formatted
Free Blocks 411107328
Free Capacity 4.38GB(4.71GB)
Book Type DVD-R
Media Type DVD-R
Media Id Code Speed 4.0x 5540KBps
Available Write Descriptor CLV 2.0x 2770KBps
Available Write Descriptor CLV 1.0x 1385KBps
Write Strategy Speed 4.0x 5540KBps
2x Speed OPC beta 08
2x Speed OPC power 12
2x Write Strategy field 1 11 86 67 80
2x Write Strategy field 2 88 80 00 00 00 00
4x Speed OPC beta 05
4x Speed OPC power 1B
4x Write Strategy field 1 0E 10 08 09
4x Write Strategy field 2 97 06 0D 0B
4x Write Strategy field 3 00 00 00 00
4x Speed OPC beta multi-pulse 04
4x Speed OPC power multi-pulse 1D
4x Write Strategy field 4 18 A8 88 85
4x Write Strategy field 5 89 AC 88 80 00 00
4x Write Strategy field 6 00 00 D0 00 00
Data area starting sector 30000h
Linear Density 0.267um/bit
Track Density 0.74um/track
Number of Layers 1
|
|
dplant123
Account closed as per user's own request
|
17. March 2004 @ 07:14 |
Link to this message
|
|
I have also tried to burn these disks using
Nero
RecordNow
Copy to DVD
and even Windows!!!!!!
but have still not beenn sucessful.
Ta
|
|
drchips
Senior Member
|
17. March 2004 @ 07:18 |
Link to this message
|
OK,
Now we might be getting somewhere.
The drive is recognising the disks (it is the drive BIOS/electronics that reports details & status back to requesting program).
As dvdinfo pro reports the disks correctly, it tends to point the finger at Nero (and possibly ASPI).
Maybe even Windows (we all know how stable Windows is: Blue Screen Of Death anyone??)
Life is just more of the same:
|
|
dplant123
Account closed as per user's own request
|
18. March 2004 @ 01:42 |
Link to this message
|
|
Hi DrChips,
Could you recommend any tests or software I can use to analise my machine and see where the problem is?
thanks
D
|
Moderator
3 product reviews
|
19. March 2004 @ 10:56 |
Link to this message
|
|
Dave , I have a Pioneer 104 f/w 1.40 RPC1 & Ritek G04 are excellent media .
If you want a link to the firmware I will try & find it (again) for you !: ]-~
|
|
dplant123
Account closed as per user's own request
|
19. March 2004 @ 11:04 |
Link to this message
|
|
Hi
Yea, I know the media seem really good. I wrote to Pioneer tech support but they simply says it sounds like the writer is broken and I should buy a new one (very helpful,not!)
I have tried firmware 1.31 and 1.41 and neither of them will allow me to burn @ 2x or write to DVD-RW's. Very Annoying
If anyone else has any other ideas I would love to hear them.
D
|
Moderator
3 product reviews
|
19. March 2004 @ 11:08 |
Link to this message
|
|
firmware versions 1.31 & 1.41 are known to be problematic for some...
That's why I use 1.40 : )
|
Moderator
3 product reviews
|
19. March 2004 @ 11:13 |
Link to this message
|
|
P.S. - Even Bulkpaq Orange X4 DVD-R (ProDisc code) burn at X2 using f/w 1.40
|
|
dplant123
Account closed as per user's own request
|
19. March 2004 @ 11:37 |
Link to this message
|
HI
Thanks just tried 1.40 but still would not burn the DVD-RW even with the latest download to Nero 5. Please see below for the log file
PS Thanks you to LeeFields, drchips & herbsman for all your help, really appriciated - pity it hasn't worked just yet. I shall keep trying though.
Dave Plant
5502-0453-8009-5417-0564-1091
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21/12/2003 03:26:59
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 21:37:36
Nero Version: 5.5.10.56
Recorder: <PIONEER DVD-RW DVR-104> Version: 1.40 - HA 1 TA 0 - 5.5.10.56
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DV-5800A> Version: 1.0A - HA 1 TA 1 - 5.5.10.56
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD600BB-75CCB0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1200BB-00DWA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DV-5800A atapi Port 1 ID 1 DMA: On
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523276kB)
Free physical memory: 234MB (239712kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On
19.3.2004
ISO compilation
21:34:01 #1 Text 0 File Isodoc.cpp, Line 7604
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
21:34:01 #2 Text 0 File Reader.cpp, Line 115
Reader running
21:34:01 #3 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)
21:34:01 #4 Text 0 File Burncd.cpp, Line 3773
Turn on Disc-At-Once, using DVD media
21:34:01 #5 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 608 (608) = #608/0:8.8
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
21:34:03 #6 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 607 ( 0:08.07)
21:34:03 #7 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE
21:34:03 #8 Text 0 File DlgWaitCD.cpp, Line 1703
Recorder: PIONEER DVD-RW DVR-104, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
21:34:03 #9 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder PIONEER DVD-RW DVR-104 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD not fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 1552384
21:34:03 #10 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 608 (608) = #608/0:8.8
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [PIONEER DVD-RW DVR-104 ]
--------------------------------------------------------------
21:34:03 #11 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
21:34:04 #12 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
21:34:04 #13 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 1x (1,380 KB/s)
21:34:04 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
21:34:04 #15 Text 0 File DVDMinusRW.cpp, Line 225
Perform 'Quick Format' (type 15h) to set disc in 'Restricted Overwrite Mode'.
21:34:04 #16 Phase 136 File dlgbrnst.cpp, Line 1655
Quick Format DVD-RW
21:35:41 #17 Phase 65 File dlgbrnst.cpp, Line 1655
Burn process started
21:35:41 #18 Text 0 File DVDR.cpp, Line 1323
Recording mode: Sequential Recording Mode for Multisession
21:35:41 #19 Text 0 File Mmc.cpp, Line 19546
Set BUFE: supported -> ON
21:35:41 #20 Text 0 File DVDR.cpp, Line 1437
Start write address at LBA 0
DVD high compatibility mode: Yes
21:35:41 #21 Text 0 File Cdrdrv.cpp, Line 7933
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
21:35:41 #22 SCSI -400 File Cdrdrv.cpp, Line 1243
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0012C0C4
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x31
Sense Qual: 0x00
CDB Data: 0xBF 0x00 0x00 0x00 0x00 0x00 0x00 0x0F 0x00 0x16 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x31 0x00
21:35:41 #23 SCSI -1176 File Cdrdrv.cpp, Line 1243
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x05
21:35:41 #24 DVDR -1176 File ThreadedTransferInterface.cpp, Line 1423
Session fixation error
21:35:41 #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1423
Could not perform start of Disc-At-Once
21:35:41 #26 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 1x (1,380 KB/s)
21:35:41 #27 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21/12/2003 03:26:58
File 'Drivers\PXHELP20.SYS': Ver=2.02.42a, size=17184 bytes, created 11/12/2003 18:33:17 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 08:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
3 product reviews
|
19. March 2004 @ 12:49 |
Link to this message
|
Quote:
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21/12/2003 03:26:58
File 'Drivers\PXHELP20.SYS': Ver=2.02.42a, size=17184 bytes, created 11/12/2003 18:33:17 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 08:27:50 (Adapter driver for rec)
You might wanna get rid of Prassi/Veritas & turn off WinXP rec function...
Might help ;-)
|
|
dplant123
Account closed as per user's own request
|
19. March 2004 @ 12:53 |
Link to this message
|
|
Hi Herbsman
Will do - what do you mean when you say "turn off WinXP rec function" how do I do it?
ta
|
|
drchips
Senior Member
|
19. March 2004 @ 12:59 |
Link to this message
|
Quote:
You might wanna get rid of Prassi/Veritas & turn off WinXP rec function...
Might help ;-)
!LOL!
Life is just more of the same:
|
Moderator
3 product reviews
|
20. March 2004 @ 03:44 |
Link to this message
|
Quote:
what do you mean when you say "turn off WinXP rec function" how do I do it?
Well I've never had to do it , but on a recent thread where drchips & I tried to aide Nero user(s) it was suggested and seemed to help...
Here's a quote from http://www.techzonez.com/forums/showthread.php?t=8478Quote:
If you are using a third party application to burn with,you should also disable the recording function of the CDRW.
Open My Computer and right click the CDRW drive icon.On the recording tab uncheck "Enable CD recording on this drive" click apply and OK.
Although it may sound odd to disable this feature,it actually prevents XP's built in burning software from conflicting with your third party application.
|
|
Advertisement
|
|
|
|
dplant123
Account closed as per user's own request
|
20. March 2004 @ 04:05 |
Link to this message
|
|
Hi
yea I already tried that - no joy unforetunatly. Thanks anyway
|
|
