|
Wrong Diskette..(wxripper problems)
|
|
|
staticxmi
Newbie
|
31. March 2009 @ 20:20 |
Link to this message
|
I used Sleepy Hollow, which is 7.69 GB, and swapped it out with Prince of Persia. Before I swapped it, with the movie in, I got the magic number, saved layout, edited layout, swapped game in, opened layout, and dumped.
Everything seemed to be going fine, until it got to the second video partition (1783936, the second one). There, I got this error.
"Error @ 0 : The wrong diskette is in the drive.
Insert %2 (Volume Serial Number: %3) into drive %1."
Can anyone explain what this means or how I might go about fixing it? I've found almost zero other people with this problem and no helpful suggestions so far.
Mmmhmm.
|
|
Advertisement
|
|
|
|
Senior Member
|
31. March 2009 @ 22:44 |
Link to this message
|
swapping the dvd with the game and then get the layout from the game not the movie and then edit the first 3 lines in the layout to be D as the first letter of the line. Some tuts do say to get layout from the movie but with my drive that didnt work and doing the other way worked.
If you send me questions on Live about modding or anything related i will block you. Dont be an idiot.
|
|
staticxmi
Newbie
|
31. March 2009 @ 22:48 |
Link to this message
|
So you suggest I take my magic number from my game, not the DVD. Also, this is what you suggest it should look like, correct? I knew you do the 2nd and 3rd line as dummy, didn't know about the first though. The first isn't important?
D19408
D1072
D109344
C1783936
J265216
C1783936
J0
Mmmhmm.
|
Senior Member
|
31. March 2009 @ 22:49 |
Link to this message
|
|
thats how i do mine and they work fine. never had an issue doing it that way.
If you send me questions on Live about modding or anything related i will block you. Dont be an idiot.
|
|
staticxmi
Newbie
|
31. March 2009 @ 22:51 |
Link to this message
|
|
Well I'm going to give it a go with your suggestion. I'll let you know how it goes!
*crosses fingers*
Mmmhmm.
|
|
uhf2
Junior Member
|
1. April 2009 @ 00:10 |
Link to this message
|
|
I do my like this
C19408
D1072
C89344
D20000
C1783936
J265216
C1783936
J0
I don,t know if it makes any diffrence but more info
The 3rd & 4th line added together make 109344 which is the size of the orginal copy.
I do all mine this way
Like I said I don,t know if it makes any difference
It,s only imposable if you give up
|
|
staticxmi
Newbie
|
1. April 2009 @ 09:12 |
Link to this message
|
Well I get to the same point using the first suggestion. It gets to the second video partition and says Wrong Diskette.
I'll try your method too, but I think it's not just what I'm copying. Maybe it's the drive I'm using? What kind of drive do you have to have?
Mmmhmm.
|
Senior Member
|
1. April 2009 @ 12:07 |
Link to this message
|
should work with a dvd rom that reads dual layer. you can also try using a different movie to hotswap with. I had to try a few before i found one that worked. I ended up settling on Chronicles of narnia
If you send me questions on Live about modding or anything related i will block you. Dont be an idiot.
|
|
staticxmi
Newbie
|
1. April 2009 @ 14:00 |
Link to this message
|
Is there a way to verify that the drive reads DL? The one I'm using is pretty hold, since I didn't wanna bust open an actual good new drive. I tried the emergency eject method and got a different error message on a different drive too, not worried about that much though.
I have a drive that for sure would work, external, but I can't find the emergency eject button on it. It's a Sony drx-820u. The only holes I can find that look like they could be it are 2 on the back bottom left and the back bottom right. Also, another drive I used seems to use power during the emergency eject which is strange, it's doing essentially what would be done if I just hit the eject button. So, my questions have expanded to this.
1. How can I tell if my drive reads DL.
2. Where might the emergency eject holes be in an external Sony DRX-820u
3. The emergency eject on my new drive has to be held in for a few seconds, then with power it's pushed out. Is there a way to open this drive for hotswap without ripping it apart?
Mmmhmm.
|
Senior Member
|
1. April 2009 @ 14:42 |
Link to this message
|
|
1. look up the drive model online to see what type of media it reads.
2. dont use emergency eject. it is the #1 way to ruin a drive cause it is forcing the gears to push the tray out and it strips them when done too much and then the tray will not open anymore. Thats why its called emergency eject.
If you send me questions on Live about modding or anything related i will block you. Dont be an idiot.
|
|
staticxmi
Newbie
|
1. April 2009 @ 15:48 |
Link to this message
|
I looked and didn't find anywhere that really told me what media it reads, but I found some firmware that's supposed to make it more compatible with DL I think. I tried it but it didn't work still, same error (Wrong diskette). The model number of the drive is xj-hd166s.
Mmmhmm.
|
|
Advertisement
|
|
|
|
staticxmi
Newbie
|
1. April 2009 @ 15:52 |
Link to this message
|
Mmmhmm.
|
