I have this one movie that's 7.8 gigs in size and that I'm trying to burn onto a DVD+R DL. I'm using Verbatim Made In India brand DVD+Rs, as I bought them online and the seller didn't say if the DVD+Rs DL were made in India or Singapore. I've heard Singapore ones are better.
Anyway, I don't know if it's because it's a bad rip, but I'm having trouble burning a good copy. The files are in a folder, which I renamed VIDEO_TS. I use ImgBurn.
The first few times I tried, it kept telling me I had a Power Calibration Error, so I converted the folder to an ISO using Folder2Iso. I burned, but when I put it in my DVD player, instead of playing as a DVD, I see a list of the files that were included in the folder.
Second time burning, I was able to burn it completely as folder, but there's a problem when trying to get to the second layer. The DVD freezes. I can jump to the next chapter, but I don't consider having to do so a successful burn.
Anyway, when I try to burn, ImgBurn shows me box where I have to choose something about break layer. I figure this has to do with the passage to the second layer. Anyway, I don't have the options in front of me, but it's like, there are two options. When I select one, it gives me the option of clicking OK, of clicking Remove UDF (or was it IDF) info, of clicking Ignore Break Layer, and some other options. When I try to click on Ignore Break Layer, it says that this will make it impossible to burn on DL media and if I'm sure. Of course, I say no. If I say Remove UDF Info, it says that I should click this only if I'm sure my player does not need it or something.
But anyway, I just have a problem. Anybody know what I could do to make it burn correctly? DVD+R DLs are very expensive, and I've already wasted a bunch. Thanks.
I burned another one, but forgot to save the log. It was a failed burn as well. But I redid the verification check. There's an error. Here's the verification log:
I 16:10:41 ImgBurn Version 2.4.2.0 started!
I 16:10:41 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)
I 16:10:41 Total Physical Memory: 523 564 KB - Available: 125 980 KB
W 16:10:41 Drive D:\ (FAT32) does not support single files > 4 GB in size.
I 16:10:41 Initialising SPTI...
I 16:10:41 Searching for SCSI / ATAPI devices...
I 16:10:41 Found 1 DVD-ROM, 1 DVD±RW and 1 DVD±RW/RAM!
I 16:11:32 Operation Started!
I 16:11:32 Source Device: [0:0:0] PHILIPS SPD3400CC JP03 (K:) (USB)
I 16:11:32 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x)
I 16:11:32 Image File: C:\Documents and Settings\HP_Administrateur\Mes documents\Mes vidéos\Outlander.mds
I 16:11:32 Image File Sectors: 3 997 472 (MODE1/2048)
I 16:11:32 Image File Size: 8 186 822 656 bytes
I 16:11:32 Image File Volume Identifier: OUTLANDER
I 16:11:32 Image File Volume Set Identifier: 3A897879003CFF1F
I 16:11:32 Image File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER!
I 16:11:32 Image File Implementation Identifier: ImgBurn I 16:11:32 Image File File System(s): ISO9660; UDF (1.02)
I 16:11:32 Read Speed (Data/Audio): MAX / MAX
I 16:11:58 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3997471)
I 16:11:58 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3997471)
I 16:11:58 Verifying Layer 0... (LBA: 0 - 1998735)
I 16:17:48 Verifying Layer 1... (LBA: 1998736 - 3997471)
E 16:48:41 Failed to Read Sector 2000288 - Reason: L-EC Uncorrectable Error
E 16:48:41 Sector 2000288 maps to File: \VIDEO_TS\VTS_14_3.VOB
E 16:48:41 Failed to Verify Sectors!
I 16:48:41 Exporting Graph Data...
I 16:48:42 Graph Data File: C:\Documents and Settings\HP_Administrateur\Application Data\ImgBurn\Graph Data Files\PHILIPS_SPD3400CC_JP03_JEUDI-9-AVRIL-2009_16-11_MKM-003-00.ibg
I 16:48:42 Export Successfully Completed!
E 16:48:42 Operation Failed! - Duration: 00:37:09
I 16:48:42 Average Verify Rate: 1 816 KB/s (1.3x) - Maximum Verify Rate: 16 718 KB/s (12.1x)
Yeah, the DVD keeps freezing when trying to change to the second layer.
Here's what I was talking about earlier. When I try to burn, it makes me choose a layer break position:
Here's when I choose "Ignore Break Options"
Here's when I choose "Seamless"
And here's when I choose "Don't update IFO/BUP info"
Quote:Anyway, I don't know if it's because it's a bad rip, but I'm having trouble burning a good copy. The files are in a folder, which I renamed VIDEO_TS. I use ImgBurn.
See if the files will open in DVD Shrink, this will help determine if there is a problem with them.
You need to choose a layer break, you can preview where it will fall. Seeing as there will be a slight pause there pick one based on what you see (definitely not during any important action). You could also try the seamless option once to see if in fact your players can handle it... some can't.
