|
HELP GETTING BENQ INTO VENDOR MODE
|
|
|
Motedog
Newbie
|
26. April 2009 @ 03:01 |
Link to this message
|
Hey guys i am trying to flash my benq drive using 1.51 and jungleflasher. I have installed the PortIO32 driver and installed .net 2.0.....I am not using a chipset at the moment i just have a standard sata cable plugged into my xbox drive and into one of the sata ports on my computer. I turn on my 360 and start jungleflasher....When i go to MTKflash i see in device properties it shows my xbox under name and PBDS next to properties. When i try to unlock the drive by clicking benq unlock it says Sending Vendor Intro and then Vendor intro failed....if i try to click the intro/device id it says Sending Vendor intro and then status 0.51 than i get the message to resend and try to unhook the power to my drive and plug it back in real quick but get the Device intro failed message....I am thinking this is happening because i am not using a chipset and i guess the on on my computer just doesnt work???? What do you guys Think?
|
|
Advertisement
|
|
|
|
|
Motedog
Newbie
|
26. April 2009 @ 03:12 |
Link to this message
|
|
EDIT: When i click the Intro/device id it gives me status 0x51 not 0.51
|
AfterDawn Addict
|
26. April 2009 @ 15:08 |
Link to this message
|
|
just spend the 15 dollars on the pci card and it will work fine.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
|
Motedog
Newbie
|
26. April 2009 @ 16:10 |
Link to this message
|
|
Yeah thats what i pretty much figured. well ive already bought the card just gotta wait for it to get here. thanks though
|
AfterDawn Addict
|
26. April 2009 @ 16:27 |
Link to this message
|
You could have also tried using Dosflash32. It has got some more options on getting a BenQ into vendor mode than JF.
Xbox 360: Slim untouched with a faked 320 GB harddrive for XBL, phat with LT 3.0, played Halo early, so going on live would be an instand ban, also with a faked 320 GB harddrive
PS3: Untouched 160 GB Slim, 60 GB Fat with latest Rogero and 160 GB internal harddrive.
PSVita: hardly ever play it
GameCube: Black with a Viper chip installed. With gameboy player. Trying to get a Wavebird controller.
|
|
Motedog
Newbie
|
29. April 2009 @ 22:07 |
Link to this message
|
Ok so i go the via chipset and plugged it into the computer and turned my computer on and installed it. I then plug my drive into the sata card turn on the xbox and run jungleflasher. I click the mtk section and choose the via 6421 port that shows my xbox in the device thing. first i tried the just click the benq unlock and that gives me some benq error message and freezes my computer...i have to restart my computer and unplug the via card for it to even restart and then turn it back off and re install the card. that really sucked. then i tried to do the power the drive on with the tray half out. choose my the port that shows my drive in the device and hit intro id.....it gives me the vendor device failed or whatever and i still cant get the damn thing into unlock mode....what am i doing wrong?????
|
|
gameover9
Suspended permanently
|
29. April 2009 @ 22:37 |
Link to this message
|
Originally posted by Motedog:
Ok so i go the via chipset and plugged it into the computer and turned my computer on and installed it. I then plug my drive into the sata card turn on the xbox and run jungleflasher. I click the mtk section and choose the via 6421 port that shows my xbox in the device thing. first i tried the just click the benq unlock and that gives me some benq error message and freezes my computer...i have to restart my computer and unplug the via card for it to even restart and then turn it back off and re install the card. that really sucked. then i tried to do the power the drive on with the tray half out. choose my the port that shows my drive in the device and hit intro id.....it gives me the vendor device failed or whatever and i still cant get the damn thing into unlock mode....what am i doing wrong?????
Follow the guide. You need to remove the windows driver which cause the crash. I've flashed benQ's and they are by far the easiest to do. Have tray half open and power cycle, click into, then read, then save the files, and then write. That easy. If intro fails, you don't have it setup right. Kill the driver in the c:\windows\system32 folder and you should have a yellow explanation by your via card in device manager if it's setup right.
|
|
leerock
Suspended permanently
|
30. April 2009 @ 04:45 |
Link to this message
|
benq is the easiest to do just use iprep 1.06 verison i always found that 1 to be the most fool proof, just run i prep with your usb key plugged in, select the 1.51 firmware, select your drive letter for your usb key.when it finishes making your usb key bootable, boot your pc from your usb flash key and follow the onscreen instructions. make sure your benq drive is plugged into the sata 6421 via card when you boot from the usb key and make sure you have it powered off before you start and voila thats it.should take you 5 mins max
|
|
gameover9
Suspended permanently
|
30. April 2009 @ 08:17 |
Link to this message
|
Originally posted by leerock:
benq is the easiest to do just use iprep 1.06 verison i always found that 1 to be the most fool proof, just run i prep with your usb key plugged in, select the 1.51 firmware, select your drive letter for your usb key.when it finishes making your usb key bootable, boot your pc from your usb flash key and follow the onscreen instructions. make sure your benq drive is plugged into the sata 6421 via card when you boot from the usb key and make sure you have it powered off before you start and voila thats it.should take you 5 mins max
wow, you made this sound alot harder than it is. Just make sure you download jungle flasher 1.55. NO USB keys, or CD's, etc are needed. Make sure you have the Via 6421 chipset card and it takes like 3 minutes to do.
|
|
Motedog
Newbie
|
30. April 2009 @ 18:44 |
Link to this message
|
Man i wish it was working that easy.....i went to the c/window/system32/drivers and deleted the viamraid file went back and enabled my via card and had the yellow exclamation....i rebooted my computer and still saw the exclamation and thought i was good to go....bring up jungleflasher click the I/O to choose the one with my xbox and freeze up happend again...i tried it over and over uninstalling my via card and reinstalling it and doin the whole process over and it just keeps freezing...i have read the tutorial numerous times and i just cant figure out what im doing wrong...anyways im just gonna try and do it using iprep now cuz im going crazy
|
AfterDawn Addict
|
30. April 2009 @ 18:52 |
Link to this message
|
First off, since it's a BENQ, just install the via drivers from viaarena.com
Plug the BENQ to the primary SATA port on the VIA and turn on. If windows freezes, reboot windows with the BENQ drive already connected.
Then flash with jungle flasher.
|
|
gameover9
Suspended permanently
|
30. April 2009 @ 20:07 |
Link to this message
|
Originally posted by PS2Menace:
First off, since it's a BENQ, just install the via drivers from viaarena.com
Plug the BENQ to the primary SATA port on the VIA and turn on. If windows freezes, reboot windows with the BENQ drive already connected.
Then flash with jungle flasher.
I just removed the driver and it works every time for me. I even hot swap, no reboots.
|
|
Motedog
Newbie
|
30. April 2009 @ 21:15 |
Link to this message
|
well fellas i think maybe its just not meant to be for me...i tried iprep and when i boot from my usb and do the dben 1234567 12345 and than click y and turn my xbox on it just stays at 0x7f i try to turn the xbox off and on again and it just stays at that....i tried jungleflasher one more time and no luck with that either it just freezes up whenever i try to select my drive....i feel like im doin everything right damnit
|
|
Advertisement
|
|
|
|
gameover9
Suspended permanently
|
30. April 2009 @ 21:22 |
Link to this message
|
Originally posted by Motedog:
well fellas i think maybe its just not meant to be for me...i tried iprep and when i boot from my usb and do the dben 1234567 12345 and than click y and turn my xbox on it just stays at 0x7f i try to turn the xbox off and on again and it just stays at that....i tried jungleflasher one more time and no luck with that either it just freezes up whenever i try to select my drive....i feel like im doin everything right damnit
You need a Via 6421 and it will work. PM me and I'll do it for you...LOL
|
