|
Burning GTA4 problem need help needed urgently
|
|
tck_2006
Junior Member
|
19. May 2009 @ 13:07 |
Link to this message
|
im trying to burn GTA4 using imgburn ive tried 6 different disks so i know its not the disk, ive used img burn to burn 10+ of my games with no problem, the iso file is fine and passes abgx360 checks.
the img burn output dump is below
I 17:58:15 ImgBurn Version 2.4.4.0 started!
I 17:58:15 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1)
I 17:58:15 Total Physical Memory: 1,037,632 KB - Available: 428,372 KB
I 17:58:15 Initialising SPTI...
I 17:58:15 Searching for SCSI / ATAPI devices...
I 17:58:15 Found 1 DVD±RW/RAM!
I 18:01:44 Operation Started!
I 18:01:44 Source File: C:\Users\mark\Desktop\gta4-digi\gta4-icon.dvd
I 18:01:44 Source File Sectors: 3,825,924 (MODE1/2048)
I 18:01:44 Source File Size: 7,835,492,352 bytes
I 18:01:44 Source File Volume Identifier: XGD2DVD_NTSC
I 18:01:44 Source File Volume Set Identifier: 34672923
I 18:01:44 Source File Implementation Identifier: Sonic Scenarist 3.1
I 18:01:44 Source File File System(s): ISO9660, UDF (1.02)
I 18:01:44 Destination Device: [1:0:0] HL-DT-ST DVDRAM GMA-4082N PT06 (D:) (ATA)
I 18:01:44 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x)
I 18:01:44 Destination Media Sectors: 4,173,824
I 18:01:44 Write Mode: DVD
I 18:01:44 Write Type: DAO
I 18:01:44 Write Speed: 1x
I 18:01:44 Link Size: Auto
I 18:01:44 Lock Volume: Yes
I 18:01:44 Test Mode: No
I 18:01:44 OPC: No
I 18:01:44 BURN-Proof: Enabled
I 18:01:45 Book Type Setting: N/A
I 18:01:45 Optimal L0 Data Zone Capacity: 1,913,760
I 18:01:45 Optimal L0 Data Zone Method: Copied From Original Disc
I 18:02:45 Set L0 Data Zone Capacity Succeeded!
I 18:02:46 Filling Buffer... (40 MB)
I 18:02:47 Writing LeadIn...
I 18:03:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)
I 18:03:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)
I 18:03:11 Writing Layer 0... (LBA: 0 - 1913759)
W 18:03:13 Failed to Write Sectors 992 - 1023 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90)
W 18:03:13 Retrying (1 of 20)...
W 18:03:13 Retry Failed - Reason: Invalid Address For Write
W 18:03:13 Retrying (2 of 20)...
W 18:03:13 Retry Failed - Reason: Invalid Address For Write
W 18:03:13 Retrying (3 of 20)...
W 18:03:13 Retry Failed - Reason: Invalid Address For Write
W 18:03:13 Retrying (4 of 20)...
W 18:03:13 Retry Failed - Reason: Invalid Address For Write
W 18:03:13 Retrying (5 of 20)...
W 18:03:13 Retry Failed - Reason: Invalid Address For Write
W 18:03:13 Retrying (6 of 20)...
W 18:03:13 Retry Failed - Reason: Invalid Address For Write
W 18:03:13 Retrying (7 of 20)...
W 18:03:13 Retry Failed - Reason: Invalid Address For Write
W 18:03:13 Retrying (8 of 20)...
W 18:03:13 Retry Failed - Reason: Invalid Address For Write
W 18:03:13 Retrying (9 of 20)...
W 18:03:14 Retry Failed - Reason: Invalid Address For Write
W 18:03:14 Retrying (10 of 20)...
W 18:03:14 Retry Failed - Reason: Invalid Address For Write
W 18:03:14 Retrying (11 of 20)...
W 18:03:14 Retry Failed - Reason: Invalid Address For Write
W 18:03:14 Retrying (12 of 20)...
W 18:03:14 Retry Failed - Reason: Invalid Address For Write
W 18:03:14 Retrying (13 of 20)...
W 18:03:14 Retry Failed - Reason: Invalid Address For Write
W 18:03:14 Retrying (14 of 20)...
W 18:03:14 Retry Failed - Reason: Invalid Address For Write
W 18:03:14 Retrying (15 of 20)...
W 18:03:14 Retry Failed - Reason: Invalid Address For Write
W 18:03:14 Retrying (16 of 20)...
W 18:03:14 Retry Failed - Reason: Invalid Address For Write
W 18:03:14 Retrying (17 of 20)...
W 18:03:14 Retry Failed - Reason: Invalid Address For Write
W 18:03:14 Retrying (18 of 20)...
W 18:03:14 Retry Failed - Reason: Invalid Address For Write
W 18:03:14 Retrying (19 of 20)...
W 18:03:14 Retry Failed - Reason: Invalid Address For Write
W 18:03:14 Retrying (20 of 20)...
W 18:03:14 Retry Failed - Reason: Invalid Address For Write
E 18:03:28 Failed to Write Sectors 992 - 1023 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90)
E 18:03:28 Next Writable Address: 464
I 18:03:28 Synchronising Cache...
W 18:03:30 User opted to skip the 'Close Track/Session/Disc' functions.
E 18:03:30 Failed to Write Image!
I 18:03:30 Exporting Graph Data...
I 18:03:30 Graph Data File: C:\Users\mark\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GMA-4082N_PT06_19-MAY-2009_18-01_RICOHJPN-D01-67_1x.ibg
I 18:03:30 Export Successfully Completed!
E 18:03:30 Operation Failed! - Duration: 00:01:45
I 18:03:30 Average Write Rate: 124 KB/s (0.1x) - Maximum Write Rate: 124 KB/s (0.1x)
can some one please help me
|
Advertisement
|
  |
|
Majininu
Newbie
|
19. May 2009 @ 13:46 |
Link to this message
|
Just check but did you burn from the .dvd file?
Also ABGX360 should create one for you and make sure ABGX360 is updated...i believe it's now 1.01 ver.
Make sure IMGBURN is updated.
Also, make sure the .dvd is set to the correct the layer break in notepad and must be at 1,913,760 sectors which it looks like it is on your LOG.
If everything checks, then try using Xbox Backup creator v2.8.
But check you Computer an all the normal protocols: reboot, burn something else, ect...
If all else fails, get a new back-up or change the DVD-Burner
~~~~~~~~~~~~~~~~~~~~~~
Been there, done that
|
AfterDawn Addict
|
19. May 2009 @ 14:03 |
Link to this message
|
Dude, didyou even look at his log? He did burn the .DVD file. And I am pretty sure 2.4.4.0 is the latest version of imgburn. And the layerbreak was correctly set.
Honestly I would try another drive. See if you can use a friend's external or so.
need jtag help? Xbox 360 console repair? PM me or chat
|
tck_2006
Junior Member
|
19. May 2009 @ 14:32 |
Link to this message
|
i tried it in my mums pc and i still get the same result
|
Majininu
Newbie
|
19. May 2009 @ 14:40 |
Link to this message
|
Yes guessswho you are right.
i was just making sure to double check everything, LOGs are not always right.
I did already suggested a different dvd-burner
sorry for any inconvenience
~~~~~~~~~~~~~~~~~~~~~~
Been there, done that
|
tck_2006
Junior Member
|
19. May 2009 @ 14:44 |
Link to this message
|
i tried it in another burner and i still get the same result
|
AfterDawn Addict
|
19. May 2009 @ 15:07 |
Link to this message
|
If I read your log correctly you try to burn at 1x speed and your media only supports 2.4x and 4x.
By the way, what brand is your media, it's not verbatim, is it?
Xbox 360: Slim untouched with a faked 320 GB harddrive for XBL, phat with LT 3.0, played Halo early, so going on live would be an instand ban, also with a faked 320 GB harddrive
PS3: Untouched 160 GB Slim, 60 GB Fat with latest Rogero and 160 GB internal harddrive.
PSVita: hardly ever play it
GameCube: Black with a Viper chip installed. With gameboy player. Trying to get a Wavebird controller.
|
tck_2006
Junior Member
|
19. May 2009 @ 15:13 |
Link to this message
|
my 360 reads unbranded media perfectly ive been using aone media since i flashed the drive that was well over a year ago and i havent had any problems using them. ive always burnt at 1x could that be the problem?
|
AfterDawn Addict
4 product reviews
|
19. May 2009 @ 19:12 |
Link to this message
|
umm.. yea. and it could also be a bad iso. and why is this urgent?
|
tck_2006
Junior Member
|
19. May 2009 @ 19:22 |
Link to this message
|
sorry home sick i managed to damage my original disk during a move and im eager to finish the game
|
tck_2006
Junior Member
|
20. May 2009 @ 07:33 |
Link to this message
|
ok i chekced the iso using abgx 360 and it passes evrything, so i dont think its a bad iso, what elce can it be?
|
AfterDawn Addict
|
20. May 2009 @ 08:16 |
Link to this message
|
Try burning at 2.4x or 4x. Could also be the disks, so get better media (Verbatim), but these won't work at 1x too.
Xbox 360: Slim untouched with a faked 320 GB harddrive for XBL, phat with LT 3.0, played Halo early, so going on live would be an instand ban, also with a faked 320 GB harddrive
PS3: Untouched 160 GB Slim, 60 GB Fat with latest Rogero and 160 GB internal harddrive.
PSVita: hardly ever play it
GameCube: Black with a Viper chip installed. With gameboy player. Trying to get a Wavebird controller.
|
tck_2006
Junior Member
|
20. May 2009 @ 08:49 |
Link to this message
|
ill give burning them at 4x a go
|
tck_2006
Junior Member
|
20. May 2009 @ 09:53 |
Link to this message
|
fixed it burnt at 4x and worked perfectly :D
|
AfterDawn Addict
|
20. May 2009 @ 11:38 |
Link to this message
|
Originally posted by tck_2006: ive tried 6 different disks so i know its not the disk,
I 18:01:44 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x)
This media is junk.
I did read that burning faster worked this time, but chances are good you'll run in to problems later. This media is right there with Memorex. The problem isn't that every single disc is junk, it's that the quality varies greatly from disc to disc. Even going through the same spindle. You'll have a few good burns then bam, all of the sudden you get burn errors out the waa-hoo.
You then spend countless hours pulling out your hair, trying to troubleshoot the problem with your pc because you've already dismissed the notion of it being the discs because a few already burn fine.
Just Google that media id for more insite. Want to actually test each burnt disc to check it's quality? Try Nero CD-DVD Speed.
Edit
Now it's called Nero DiscSpeed.
This message has been edited since posting. Last time this message was edited on 20. May 2009 @ 11:42
|
tck_2006
Junior Member
|
20. May 2009 @ 12:07 |
Link to this message
|
for me it all comes down to the price of the media, the disc's car £1 per disk how much are the verberti's prer disk now?
|
AfterDawn Addict
|
20. May 2009 @ 15:37 |
Link to this message
|
Xbox 360: Slim untouched with a faked 320 GB harddrive for XBL, phat with LT 3.0, played Halo early, so going on live would be an instand ban, also with a faked 320 GB harddrive
PS3: Untouched 160 GB Slim, 60 GB Fat with latest Rogero and 160 GB internal harddrive.
PSVita: hardly ever play it
GameCube: Black with a Viper chip installed. With gameboy player. Trying to get a Wavebird controller.
|
Advertisement
|
  |
|
Moderator
|
21. May 2009 @ 06:29 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
|