|
|
|
Problem burning DVDs - the files get burned, but the files seem to get deleted afterwards.
|
|
|
h9e68mhh
Newbie
|
19. May 2009 @ 18:12 |
Link to this message
|
Okay, I need to burn a video I have onto a blank DVD. I've tried several programs to burn the DVD, but none have worked. I tried using Nero Burning ROM, for example, but it doesn't seem to work. Basically, the DVD will either burn or just won't burn at all. The video is ~4.2GB large, and the disc is ~4.7GB large, so I don't think it's a size issue. Now, in order for the disc to burn, I need to write it at 1x. Anything higher than that seems to produce an error as soon as the file starts getting burnt. Some errors I get include: "Power Calibration Area Error", and "Invalid Address For Write".
HOWEVER, if I do manage to burn the disc at 1x, the disc will usually burn. After I burn the disc, I look at the disk in "My Computer", and it'll show me the name of the video on the DVD - when I right click it and see the options, it'll actually say it's ~4.2GB full, which meant the burn was successful. However, as soon as I remove the disk, and put it back into the drive, the files seem to get wiped out. The name of the disk will change from the proper name of the video to the generic, "DVD-Drive", and when I right click that, it'll say "0GB full, 0GB empty", implying the disk was somehow corrupted. However, it only happens as soon as I take the disk out of my computer - it'll be perfectly fine while it's in my computer, it seems.
Thinking it was a problem with my burner, I took the video to my father's laptop, and tried burning the file from there. The results were even worse. I tried burning it at 1x, but as soon as I attempted burning the disk, I got a power calibration error, and had to cancel the operation.
For reference, my DVD burner is "PIONEER DVD-RW DVR-106D". The firmware's been updated to its latest version, 1.80. The two brands of DVD I tried to use were "Ritek F1" and "RITEKG05". I did some research, and heard they weren't exactly the "best brand", however, I just need to burn this video for a presentation - not for storage purposes, so I just need the video to work once. I also did some research on the power calibration issue, and tried "setting the option for my DVD burner" to "disabled" (forgot what the setting was called), but it basically didn't work, and I still got the errors.
Anyways, if anyone could help me, I would really appreciate it. I find it really weird that my burner is able to burn the files, but then the files get deleted, as well as the power calibration error. I tried searching it on the forum, but I was still unable to fix my problem. If anyone is able to suggest any solutions to the problem I'm having, I would really appreciate it. Thank you in advance.
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
19. May 2009 @ 19:24 |
Link to this message
|
|
Post your burn log.
99% of all problems are between the computer and the chair.
|
|
h9e68mhh
Newbie
|
19. May 2009 @ 19:41 |
Link to this message
|
Alrighty then, here's a log for a Nero burn I just did. (However, this time I was burning at 1x, and it still failed.) I hope this doesn't take up too much space.
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 9.2.6.100
Internal Version: 9, 2, 6, 100
Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 9.2.6.100
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : via Inquiry data
CD-ROM: <HU7303E JOG835V >Version: 1.0 - HA 1 TA 1 - 9.2.6.100
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00JJC0 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HU7303E JOG835V 1.0 abchvq46 Port 3 ID 0 DMA: Off
CdRomPeripheral : HU7303E JOG835V 1.0 abchvq46 Port 3 ID 1 DMA: Off
CdRomPeripheral : HU7303E JOG835V 1.0 abchvq46 Port 3 ID 2 DMA: Off
CdRomPeripheral : HU7303E JOG835V 1.0 abchvq46 Port 3 ID 3 DMA: Off
=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-106D E: CdRom0
HU7303E JOG835V D: CdRom1
HU7303E JOG835V F: CdRom2
HU7303E JOG835V G: CdRom3
HU7303E JOG835V H: CdRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1470MB (1505776kB)
Free physical memory: 655MB (671704kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.5.2009
Burn DVD Image
7:37:40 PM #1 Text 0 File SCSIPTICommands.cpp, Line 452
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
7:37:41 PM #2 Text 0 File Burncd.cpp, Line 3587
Turn on Disc-At-Once, using DVD media
7:37:41 PM #3 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 2298495
Last address to be written: 2201279
7:37:41 PM #4 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD)
7:37:41 PM #5 Text 0 File DlgWaitCD.cpp, Line 2882
Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R
Disc Manufacturer ID: <RITEKG> <05>
Disc Application Code: 64, Disc Physical Code: 193
7:37:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:37:41 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 744
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2201280 (2201280) = #2201280/489:10.30
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2201280 blocks [E: PIONEER DVD-RW DVR-106D]
--------------------------------------------------------------
7:37:41 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 946
Prepare [E: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4508221440, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2201280 | 2201280 | 0x00
2201280 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
7:37:41 PM #9 Text 0 File SCSIPTICommands.cpp, Line 242
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
7:37:41 PM #10 Text 0 File Burncd.cpp, Line 4320
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
7:37:41 PM #11 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
7:37:41 PM #12 Text 0 File Burncd.cpp, Line 4442
Cache writing successful.
7:37:41 PM #13 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
7:37:41 PM #14 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 1x (1,385 KB/s)
7:37:42 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2676
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:37:42 PM #16 Text 0 File DVDR.cpp, Line 3279
Recording mode: Sequential Recording Mode
7:37:42 PM #17 Text 0 File DVDR.cpp, Line 3433
Start write address at LBA 0
DVD high compatibility mode: Yes
7:37:42 PM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x0489b9c0: Len x648
7:37:42 PM #19 Text 0 File Cdrdrv.cpp, Line 9966
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Transfer Rate: 10,08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 0 h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0, Extended part version: 0
Start PSN of the Extra Border Zone: 0 h
Start PSN of Physical format information blocks in Extra Border Zone: 0 h
Media Specific [16..783]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00
7:37:42 PM #20 Text 0 File DVDR.cpp, Line 3571
Reserved Track size: 2201280 (2196C0h, 4299MB) -> return code 0
7:37:42 PM #21 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
7:37:43 PM #22 Text 0 File Cdrdrv.cpp, Line 1274
19:37:43.312 - E: PIONEER DVD-RW DVR-106D : Queue again later
7:37:47 PM #23 SPTI -1061 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
Sense Area: 0x71 00 04 00 00 00 00 0E 00 00 00 00 44 D9
Buffer x08440640: Len x10000
0x02 00 04 24 01 00 05 24 03 00 06 24 1A C4 06 0C
0x2D 38 40 02 02 00 04 24 2D 28 00 00 2D 30 00 02
0x1A C4 06 0C 2D 38 40 02 2D 38 40 02 02 00 04 24
7:37:47 PM #24 CDR -1061 File Writer.cpp, Line 306
Internal target failure
E: PIONEER DVD-RW DVR-106D
7:37:48 PM #25 Text 0 File DVDR.cpp, Line 3838
EndDAO: Last written address was 767 (2FFh)
7:37:48 PM #26 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0
7:37:48 PM #27 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 1x (1,385 KB/s)
7:37:48 PM #28 Text 0 File SCSIPTICommands.cpp, Line 289
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:37:50 PM #29 Text 0 File Cdrdrv.cpp, Line 11243
DriveLocker: UnLockVolume completed
7:37:50 PM #30 Text 0 File SCSIPTICommands.cpp, Line 452
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
19. May 2009 @ 19:50 |
Link to this message
|
|
Your burner is too old to properly work with today's media.
99% of all problems are between the computer and the chair.
|
|
varnull
Suspended permanently
|
19. May 2009 @ 21:00 |
Link to this message
|
wow.. a pioneer 106 still working .. that's awesome.. haven't seen one actually try to burn in about 4 years.
You could try flashing it to AO4 firmware.. that seems to handle everything but 16x +r's
The ritek G05 disks should be fine.. the pioneer 106 and G05 was the stock combination for xbox copies back in the day.. I have close on 1000 made that way and they are still perfect... unlike my poor old 106 which hit the scrapheap 4 years ago with disk calibration errors and no reading capabilities.
1x is too slow anyway.. 4x is a nice speed for the 106.. is DMA on, and if it reads disks try giving the laser a good clean, but be prepared to go out and invest in a new burner.
This message has been edited since posting. Last time this message was edited on 19. May 2009 @ 21:06
|
|
h9e68mhh
Newbie
|
19. May 2009 @ 21:32 |
Link to this message
|
Your burner is too old to properly work with today's media.
wow.. a pioneer 106 still working .. that's awesome.. haven't seen one actually try to burn in about 4 years.
You could try flashing it to AO4 firmware.. that seems to handle everything but 16x +r's
Wow, well that's interesting. I knew my computer was old (the last firmware update was in 2003), but I didn't think it would be that bad. I suppose you are right - DVDs are quite a new media. Actually - I managed to burn videos fine with my old burner on my old computer (which was, ironically, newer than my "new" computer). Personally, most of the stuff I do on my computer is just schoolwork - no games or anything - so I never really wanted a supercomputer - but I do suppose that technology gets outdated fast for the computer within just a few years. From both of your reactions, I guess I'd better burn my disc on another computer.
What really bothered me, though, was that it would still sometimes burn with 1x, but yeah, half of the time I guess it would just not burn at all. Same with my father's "new" laptop as well. I guess I'll just have to try burning the files on my sister's laptop later, then. She has a new computer, so I guess that's my best chance for getting something burnt.
Hmm, flashing it? Well, I never liked the word "flash" with computers, and I always hear bad things about it. Flashing a computer is like performing open heart surgery. I definitely don't think I'm experienced/have enough knowledge to risk flashing my computer, though I do suppose the results could be good. I'm going to try burning the video on my sister's laptop using Nero. I'll be sure to post the results here. Thank you for the assistance, Dialysis1 and Varnull, I really appreciate it.
|
|
h9e68mhh
Newbie
|
22. May 2009 @ 17:34 |
Link to this message
|
Hmm, something weird kind of happened.
Well, I tested out burning the files on my dad's old laptop - I got nearly the same error (power calibration, etc) and it didn't burn. I tried it on my sister's laptop, which was very new, and it seemed that the burning process worked. After burning the files, I could remove the DVD, and put it back into her laptop, and it would work, which meant that the files were actually burnt. HOWEVER, as soon as I put the DVD into my own computer - the disc doesn't read at all, and my computer just gives me the generic "DVD drive". However, my computer can read the other DVDs (the ones I don't burn) just fine. Why can't my computer read the DVD that was burnt on my sister's laptop? Tell me if you need another log - I forgot to transfer the log to my computer and she currently has her laptop with her.
|
AfterDawn Addict
|
22. May 2009 @ 17:39 |
Link to this message
|
|
Most likely your drive is not compatable with those discs.
99% of all problems are between the computer and the chair.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
23. May 2009 @ 00:29 |
Link to this message
|
|
@TC,
Everyone's analysis is sound and based in fact. Yours is based in "wishcraft".
Just suck it up and get a new drive already.
|
|
