could somebody give me the name of a site to buy kriptview evolution A750 and also what cables I require to download software I have a HP laptop the infomation is probally posted already but im not very good on the pc thanks.
Originally posted by PaDeise: could somebody give me the name of a site to buy kriptview evolution A750 and also what cables I require to download software I have a HP laptop the infomation is probally posted already but im not very good on the pc thanks.
Originally posted by HiTeck:
If you have a PC/Laptop with a 9 pin serial socket then all you need is a Null Modem Cable, see pic below.
If you have a PC/Laptop that doesn't have the 9 pin serial socket you will need a Null Modem Cable and a USB adapter, See pic below.
If you have a PC and you are struggling with the usb adapter or you have Vista like me you could install a PCI serial card which is easily added to you PC and with this all you need is the null modem cable which gives you a direct link from your box to the pc.
Problems with your PC/Laptop not recognising your box.
To see which port your USB adapter is connected to, connect your USB adapter and follow the following instructions:
1. Go to the Start Menu
2. Right click on "My Computer"
3. Select "Properties"
4. Click on the "Hardware" tab
5. Click on "Device Manager"
6. Click the + sign next to "Ports (COM & LPT)"
7. One of the listed ports should indicate which port your USB adapter is connected to (e.g. COM1, COM2, COM3, etc.)
8. Go back to your map software program that you use to transfer data and make sure it is looking at the correct port.
9. You should be able to transfer data once the correct port is selected
Follow my advice to step 7. Locate your USB Adapter (port *)
Right click on that port and select properties. Then select port settings, then select advanced. At the bottom of that tab will be a drop down box with the port selected (port * in your case). Use the drop down to select another port (eg 1, 2 or 3). If the port you want to use is already allocated to something else, you can use the same procedure to reassign that port after you have finished.
Save the selections in the usual way. The USB converter will be permanently assigned to the port you selected.
Originally posted by HiTeck:
For the Kryptview you will need the Loader which is Here.
Then you will need to download the Bin file which you can get Here.
Download both the loader and Bin file and save them to your Desktop.
Open the Loader , once opened you will have a box load like this.
Click on the green download button,
Once you have pressed the download button you will see another box load like below,
Press open and select the Bin file that you saved to your desktop earlier highlighted in yellow,
Press open then the box will load like below with the Bin file selected.
Now turn off your Kryptview, press Start then turn the Kryptview back on. You should now see the firmware starting to load,
Once done you will see this message,
Once finished let the box reboot and then your done, congratulations.
Whatever you say, say nothing when you talk about you know what for if you know who might hear you, you know what youll get. Youll be sent off to you know where for you would not know how long. Maybe I could search through the threads so you dont have to ??
