|
Guide: How To Burn XBox360 Games
|
|
Senior Member
|
23. September 2009 @ 22:29 |
Link to this message
|
|
Looks like you are forgetting to go to drive tools and unlock drive before doing the backup. This is not a one time setting, You must do this for each backup.
|
|
Advertisement
|
|
|
|
Senior Member
|
23. September 2009 @ 22:36 |
Link to this message
|
There's nothing wrong with that burn mate.
Every Xbox 360 game has a video partition on it which contains a short video that displays the message "To play this disc, put it in an Xbox 360 console" in various languages. There are 3 different types of video parition, referred to as wave 1, wave 2 and wave 3. Wave 3 also contains the $SystemUpdate folder which contains files to update the Xbox 360 to the latest dashboard version (should it need to be updated). You're burning a newer wave 3 game, while your son has obviously burned an older game that contains either the wave 1 or wave 2 video partition.
Have you actually tried playing the game in the 360? Is the console flashed with the latest firmware? Older firmware won't play the latest wave 3 games (pretty much every game released in the last few months, with a handful of exceptions). If you've got iXtreme 1.51 or 1.6 installed on the console and the game still doesn't play, then it must be a bad burn, because you seem to be doing everything else right.
|
Senior Member
|
23. September 2009 @ 22:57 |
Link to this message
|
Yeah listen to funk. Disregard my last post. I was thinking you where talking about xbc screen. After looking at the pix I see there of properties of the disk in in pc.
|
|
bigwill68
Suspended permanently
|
23. September 2009 @ 23:10 |
Link to this message
|
Originally posted by funksoulb:
Have you actually tried playing the game in the 360? Is the console flashed with the latest firmware? Older firmware won't play the latest wave 3 games (pretty much every game released in the last few months, with a handful of exceptions). If you've got iXtreme 1.51 or 1.6 installed on the console and the game still doesn't play, then it must be a bad burn, because you seem to be doing everything else right.
I have tryed all 5 wasted disc in the console it trys to read it then after awhile it saids open tray,the console has been flashed.i don't know what version he had it flashed by somebody,,Question can I find out what firmware or flashed version it has on it?it plays Batman Arkham Asylum flawless that's a backup and that just came out in Aug 25 in north America...I believe it's something i'm not doin right..i'll try my Sony Optiarc ad7200S burner maybe it's the burner
but the File size are totally different did you see that?
Done out of Here!
This message has been edited since posting. Last time this message was edited on 24. September 2009 @ 00:32
|
|
jgofett
Suspended due to non-functional email address
|
25. September 2009 @ 16:55 |
Link to this message
|
Hopefully someone here can help me out, I have been burning games for a year with IMGburn using my mad dog md-16x3dvd9-8x drive after running the iso's through agbx, I recently had to format my PC HD and now when I try to burn games imgburn locks up anywhere from 6-18% complete, i have had only one game come through complete since the format. I am using Verbatim 2.4 from sing. I have tried flashing my burner with different firmware and same results, please help i dont know what the heck it could be.
|
|
Sonora77
Suspended due to non-functional email address
|
16. November 2009 @ 23:34 |
Link to this message
|
On this do I have yo also connect my Xbox 360 to my computer, just like it said for the regular xbox
|
|
Cortizone
Newbie
|
27. November 2009 @ 12:52 |
Link to this message
|
I seem to be having trouble setting my booktype to DVD-Rom with DVDInfoPro, my DVD re-writer is an LG GH22LP2, which is supposed to support bitsetting changes, however when I attempt it with DVDInfo it says it is not supported.
Any ideas?
|
|
bontiguel
Suspended permanently
|
1. December 2009 @ 12:47 |
Link to this message
|
|
spammer kicked to the curb by binkie
This message has been edited since posting. Last time this message was edited on 1. December 2009 @ 13:31
|
|
wab6
Newbie
|
3. December 2009 @ 23:54 |
Link to this message
|
Hi guys, I am getting soo confused. there are so many tutorials online and each of them states something different.
so here's the deal (bear in mind i'm a noob in this), I "backed up" my 360 game and using and then I checked from xdvdmulleter that it's not stealth packed and when i tried to patch it using ss merger 1.6 i get the following error
[img]
http://img686.imageshack.us/i/360error.jpg/[/img]
so i don't know what that means
so can you please guide me the right way?
thank you
|
AfterDawn Addict
|
4. December 2009 @ 00:12 |
Link to this message
|
get rid of mulleter, and ssmerger. buy yourself a benq, sammy, or lite-on drive from ebay. flash it with iextreme 1.6 0800 firmware. use it to back up your games. then you can just burn them.
however, if you insist on doing it your way *sounds like you are using winxripper method to me* then after you copy the game, run it through abgx and it will patch it for you, so then all you have to do is burn the game.
Come talk with us on efnet at #elitemods !!! or just click ME
ALSO, DO NOT SEND ME MESSAGES ON LIVE REGARDING MODDING CONSOLES, OR HOW I PLAYED A CERTAIN GAME EARLY. I WILL NOT RESPOND. I WILL INSTEAD DELETE YOUR MESSAGE, AND BLOCK ALL COMMUNICATION FROM YOU. JUST SEND ME A PM ON HERE. |
|
wab6
Newbie
|
4. December 2009 @ 00:18 |
Link to this message
|
thanks for replying but i just got even more confused, sorry.
I should have been more clearer, when I said "backed up" my games i actually meant I.. you know.. downloaded them so i dont see how the first thing applies here.
and also, i really don't want to spend more money on all this, this whole xbox has xost me a lot already and im broke now :(.
And, I didn not use winxripper, however i do have agbx, maybe i should try to use that to see if i have a better result...
thanks for your reply
|
|
wab6
Newbie
|
4. December 2009 @ 00:35 |
Link to this message
|
this is what ABGX gives me:
-------------------------------------------------------------------------------
\\//\\//\\//\\// _ |_ _ \ \/ /_ _ _ \\//\\//\\//\\//\\//\\//\\//\\//\\//\\
//\\//\\//\\//\\ (_||_)(_|/ /\ \_||_ | | //\\//\\//\\//\\//\\//\\//\\//\\//\\//
------------------------_|------_||_||_|--v0.9.4-------[http://abgx360.net]----
D:\Games\Assassins_Creed_II_NTSC_XBOX360-GameStop\Assassins Creed II\gs-ac2.dvd is valid
Checking Game
ISO: "D:\Games\Assassins_Creed_II_NTSC_XBOX360-GameStop\Assassins Creed II\gs-ac2.iso"
Size: 7838695424 bytes (larger than normal)
Files in ISO: 31, Folders in ISO: 0
Total bytes used: 2857156608 (39.10%)
ISO appears to have random padding
XEX Media ID: E398896F1EB0F47C080355F9-6EA4A69F
XEX CRC = D924F099
Region Code: 0xFFFFFFFF
Region Free!
Checking SS
Timestamp of Authoring: 2009/10/22 00:00:00
Timestamp of Mastering: 2009/10/26 02:00:16
SS CRC = 2CFF38ED (RawSS = 5A4FFCDB)
SS Media ID: E398896F1EB0F47C080355F9-6EA4A69F (matches game)
SS looks valid
Checking DMI
Timestamp of Authoring: 2009/10/22 00:00:00 (matches SS)
DMI CRC = 48AB4CEA
DMI Media ID: E398896F1EB0F47C080355F9-6EA4A69F (matches game)
DMI looks valid
Checking PFI
PFI CRC = 05C6C409
PFI does not match known data (could be corrupt or a new wave not seen before)
Displaying suspicious PFI in hex and ascii:
OFFSET 0 1 2 3 4 5 6 7 8 9 A B C D E F
0x0000 01 02 31 10 00 03 00 00 00 FC FF DF 00 03 AD 7F 1 . ...üÿß.
0x0010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
*
Video partition found
Video volume space size and size of PFI data area do not match!
Cannot check padding due to invalid or uncertain PFI/Video
Video CRC = B78772C8 (V0 & V1 skipped due to non-matching or absent PFI)
Video partition does not match known data but neither did PFI
Stealth status is uncertain
Verifying this game against the online database...
One or more CRC requirements for Verification were not met, cannot continue
Verification failed
Starting AutoFix
Failed to find a verified ini file for this Xex
Attempting to fix PFI based on SS
Unwilling to automatically fix PFI because SS is newer than the last known 2nd wave date
AutoFix Failed, Stealth is still uncertain
i'm lost...
|
|
nagorg
Newbie
|
17. December 2009 @ 13:53 |
Link to this message
|
I have a quick question. I have burnered 6 six games successfully but how do i know which wave (1,2,3,or4) to use on my iso?
|
Senior Member
|
17. December 2009 @ 16:31 |
Link to this message
|
|
|
|
blah283
Newbie
|
11. January 2010 @ 07:18 |
Link to this message
|
|
hello guys, im big nob on those stuff, can someone tell me excatly wat is wave 4,3,2,1? or someone have complete guide and new one plz give me link, bc this post kind old 2008.. i dont think old software can work anymore
|
Senior Member
|
11. January 2010 @ 08:39 |
Link to this message
|
Originally posted by blah283:
hello guys, im big nob on those stuff, can someone tell me excatly wat is wave 4,3,2,1? or someone have complete guide and new one plz give me link, bc this post kind old 2008.. i dont think old software can work anymore
360 games have a video partition on them which contains a video that says "To play this disc, put it into an Xbox 360 console". The different types of video partition are the different waves. Starting with wave 3, the video partition also contains an update for the dashboard and this tends to be the reason why we end up with new waves - a new dashboard update is released and they put it into the video partition on a game disc, hence a new wave appears on the scene.
Some firmware has strict compliance with certain waves, so it may only boot games if they are waves 1, 2, 3 or 4, for example. Strict compliance is good because it means you can't boot a backup that has a missing video partition, or a video partition that doesn't match up with any of the waves that the firmware supports - it's a security thing designed to stop you being detected on Xbox Live. It's bad because it means that when a new wave appears, you can't boot the game without using a workaround such as the activate.iso disc. Personally I just use a non-stealth firmware that boots anything as I'm only playing offline anyway so the risk of a ban is zero.
|
|
xboxqueen
Suspended permanently
|
14. January 2010 @ 21:24 |
Link to this message
|
|
spam edited by ddp
This message has been edited since posting. Last time this message was edited on 14. January 2010 @ 22:21
|
|
Gekkehenk
Newbie
|
23. February 2010 @ 08:07 |
Link to this message
|
|
|
|
nstag8r
Newbie
|
11. March 2010 @ 12:26 |
Link to this message
|
|
Thanks to all of you that contributed to this thread. Greatly appreciate the info. Noob, first post.
The Instigator
|
|
KoRaun
Newbie
|
2. May 2010 @ 08:24 |
Link to this message
|
Hey guys i have a problem...im following the steps of the TUT and i keep getting this error
"I/O Error!
Device:[2:0:0} Optiarc DVD RW AD-7560S SH03 (E:) (ATA)
ScsiStatus: 0x02
Interpretation: Write(10) - Sectors:1947168 - 1947199
Sense Area: 71 00 03 00 00 00 00 0a 00 00 00 00 0C 00 00 00 00 00
Interpretation: Write Error"
And here is a copy of my log
I 16:43:36 ImgBurn Version 2.5.1.0 started!
I 16:43:36 Microsoft Windows Vista Home Basic Edition (6.0, Build 6001 : Service Pack 1)
I 16:43:36 Total Physical Memory: 2,881,220 KB - Available: 1,422,228 KB
W 16:43:36 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 16:43:36 Initialising SPTI...
I 16:43:36 Searching for SCSI / ATAPI devices...
I 16:43:36 -> Drive 1 - Info: Optiarc DVD RW AD-7560S SH03 (E:) (ATA)
I 16:43:36 Found 1 DVD±RW/RAM!
I 16:45:32 Operation Started!
I 16:45:32 Source File: C:\Users\Koraun\Downloads\Splinter.Cell.Conviction.REGION.FREE.XBOX360-HHH.[www.FilmsBT.com]\iso\HHH\SCConviction.dvd
I 16:45:32 Source File Sectors: 3,827,488 (MODE1/2048)
I 16:45:32 Source File Size: 7,838,695,424 bytes
I 16:45:32 Source File Volume Identifier: DVD_ROM
I 16:45:32 Source File Volume Set Identifier: ec67c000MS UDFBridge
I 16:45:32 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 16:45:32 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 16:45:32 Source File File System(s): ISO9660, UDF (1.50)
I 16:45:32 Destination Device: [2:0:0] Optiarc DVD RW AD-7560S SH03 (E:) (ATA)
I 16:45:32 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x)
I 16:45:32 Destination Media Sectors: 4,173,824
I 16:45:32 Write Mode: DVD
I 16:45:32 Write Type: DAO
I 16:45:32 Write Speed: 2.4x
I 16:45:32 Link Size: Auto
I 16:45:32 Lock Volume: Yes
I 16:45:32 Test Mode: No
I 16:45:32 OPC: No
I 16:45:32 BURN-Proof: Enabled
W 16:45:34 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 2,770 KB/s (2x)
I 16:45:34 Book Type Setting: N/A
I 16:45:34 Optimal L0 Data Zone Capacity: 1,913,760
I 16:45:34 Optimal L0 Data Zone Method: Copied From Original Disc
I 16:45:34 Set L0 Data Zone Capacity Succeeded!
I 16:45:35 Filling Buffer... (40 MB)
I 16:45:36 Writing LeadIn...
I 16:46:43 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 16:46:43 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 16:46:43 Writing Layer 0... (LBA: 0 - 1913759)
I 17:06:36 Writing Layer 1... (LBA: 1913760 - 3827487)
W 17:07:06 Failed to Write Sectors 1947168 - 1947199 - Reason: Write Error
W 17:07:06 Retrying (1 of 20)...
W 17:07:06 Retry Failed - Reason: Invalid Address For Write
W 17:07:06 Retrying (2 of 20)...
W 17:07:06 Retry Failed - Reason: Invalid Address For Write
W 17:07:06 Retrying (3 of 20)...
W 17:07:06 Retry Failed - Reason: Invalid Address For Write
W 17:07:06 Retrying (4 of 20)...
W 17:07:06 Retry Failed - Reason: Invalid Address For Write
W 17:07:06 Retrying (5 of 20)...
W 17:07:06 Retry Failed - Reason: Invalid Address For Write
W 17:07:06 Retrying (6 of 20)...
W 17:07:06 Retry Failed - Reason: Invalid Address For Write
W 17:07:06 Retrying (7 of 20)...
W 17:07:06 Retry Failed - Reason: Invalid Address For Write
W 17:07:06 Retrying (8 of 20)...
W 17:07:06 Retry Failed - Reason: Invalid Address For Write
W 17:07:06 Retrying (9 of 20)...
W 17:07:06 Retry Failed - Reason: Invalid Address For Write
My drive is the Optiarc DVD RW AD-7560S
....also ... i know it said use verbatim but im using memorex...is that a problem??
the guy i usually buy these games from uses memorex so i was trying them...They are DVD+R DL
any help would be appreciated
|
|
Advertisement
|
|
|
Senior Member
2 product reviews
|
3. September 2010 @ 16:07 |
Link to this message
|
|
Apologies wrong thread please delete
This message has been edited since posting. Last time this message was edited on 3. September 2010 @ 16:09
|
