|
The Official Cooling Thread!
|
|
|
ddp
Moderator
|
8. May 2005 @ 15:19 |
Link to this message
|
|
that is also to attach a monitor to or use an adapter to attach a regular vga 15pin connector to
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
8. May 2005 @ 15:24 |
Link to this message
|
|
Is the white socket shown not the DVI output? You can also fit an adapter to enable you to run a second monitor off. I do with mine!
Gif by Phantom69
 |
|
Repoman89
Junior Member
|
7. June 2005 @ 14:48 |
Link to this message
|
|
Well this thread seems a bit old but I'll try to get an answer anyway...
I'm going to be building a computer with these components:
Antec solution atx case
antec smartpower 500watt psu
asus a8n-sli motherboard
amd athlon64 3800+ venice retail
msi geforce 6800gt
corsair valueselect 1gb ddr
250gb maxtor diamondmax (7200, 16mb)
floppy, dvd burner, dvd drive
audigy2
gigabyte wireless network pci card
speakers, keyboard, monitor etc etc.
The case comes with 2 120 mm fans, one back and one front. The PSU has 2 80mm: one intake and one exhaust. My questions:
1. Will stock Athlon64 cooling be fine? I won't be doing any overclocking (not for now). Or do I need to get a separate HSF?
2. Will this cooling configuration be alright in general? The case fans are 38 cfm. I'm new to building computers so any cooling input would be great! ;)
edit: By the way, quiet is best for me, I want to be able to hear my music and games at lower volumes over the noise!
This message has been edited since posting. Last time this message was edited on 7. June 2005 @ 14:50
|
|
bklyn1028
Member
|
14. June 2005 @ 09:49 |
Link to this message
|
|
Just got an Asus a8n-sli deluxe,,,,,should i change the chipset fan, have a gigabyte geforce 6800gt....can't play Medal of Honor Pacific Assault, it lags terribly....even did it with an radeon X800 Pro....wondering if the cooler on the chipset should be changed or is the stock one fine? I snuck in 2 questions there...lol
garlic and olive oil.....makes a person sound...maybe a little mayo too...forget the mayo...had a stint put in.....
EVGA 680i....Intel E6600......2 hitachi 120GB sata...striped nvidia raid 0..2 GB Corsair DDR2 1066...NZXT Lexa case....EVGA 8800GTX ...NEC 3550 dvdrw, Toshiba dvd rombof DEll 2405fpw
|
|
ddp
Moderator
|
14. June 2005 @ 11:22 |
Link to this message
|
|
how hot does the chipset heatsink get, if possible try a digital thermomenter
|
|
bklyn1028
Member
|
14. June 2005 @ 16:32 |
Link to this message
|
|
the case i got (mge titanium) has 3 temp probes....good question....i'll hook one of the probes on it...and let you know
garlic and olive oil.....makes a person sound...maybe a little mayo too...forget the mayo...had a stint put in.....
EVGA 680i....Intel E6600......2 hitachi 120GB sata...striped nvidia raid 0..2 GB Corsair DDR2 1066...NZXT Lexa case....EVGA 8800GTX ...NEC 3550 dvdrw, Toshiba dvd rombof DEll 2405fpw
|
|
bklyn1028
Member
|
15. June 2005 @ 15:53 |
Link to this message
|
|
repoman .....according to AMD....if you change their stock HSF...the 3 yr warranty is voided...the consensus is...from what i've read is their HSF is fine....does the job.....but...............
garlic and olive oil.....makes a person sound...maybe a little mayo too...forget the mayo...had a stint put in.....
EVGA 680i....Intel E6600......2 hitachi 120GB sata...striped nvidia raid 0..2 GB Corsair DDR2 1066...NZXT Lexa case....EVGA 8800GTX ...NEC 3550 dvdrw, Toshiba dvd rombof DEll 2405fpw
|
|
Bartlome
Newbie
|
12. December 2005 @ 20:57 |
Link to this message
|
|
my computer runs at 41-46c at idle at gets up to 60c when playing games and thats with all fans running full speed
intel P4 3.2 GHZ
intel 915GAV
Cooler Master HYPER48
MSI Nvidia GeForce 6600GT
1 x Kingston 256MB PC3200 + 1 x Kingston 512MB PC3200
SB Audigy 2
A-POWER 480w
Lite-On DVD-ROM
I/O Magic DVD-RW
WD 160GB SATA
is this a problem?
This message has been edited since posting. Last time this message was edited on 22. December 2005 @ 14:18
|
Member
|
11. February 2006 @ 16:31 |
Link to this message
|
|
bartlome is that a lga 775 skt p4??
man that cooler look that can do better than that.
have you try it with artic silver 5 thermal grease
Dr.xp
Pentium D 805 2.66ghz
Foxconn 8400 GS 512 GDDR2 PCI-EX
2gb DDR2 Pc2-5300
|
AfterDawn Addict
1 product review
|
17. February 2006 @ 17:16 |
Link to this message
|
|
bklyn1028
I just happended to have used that same spec (board, CPU, vid card, and AMD 3500+) that you use. If the fan on the chipset is working fine then you shouldn't need to change it, although the stock chipset fan fails regularly on that board (you can call Asus and they'll send a replacement for free). I was able to overclock the AMD to 2.72 Ghz stable which can speed things up. That should correct some of your speed problems. The quality of your memory was not mentioned but that too can affect vid game performance. You might also want to drop some of the high quality settings such as anistrophic and anti aliasing along with a a resolution drop.
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
Member
|
7. April 2006 @ 16:23 |
Link to this message
|
I have a brand new system (AMD x2 3800+) all in sig, and my CPU keeps overheating. It was running at around 70C just right aftr startup, I turned cool n quiet on, and it didn't help at all. I took the side of my case of and put a floor fan beside my case, and it still did not help. I'm buying this.
http://www.newegg.com/Product/Product.asp?Item=N82E16835193002
and artic silver 5. Will this be substantial enough to cool down my processor? Also, my fans in my computer: One 120mm inlet fan below PSU, one 80mm inlet fan on the side (like 4 inches away from my HSF), one 80mm vent fan on top, PSU fan vent of course. Does the HSF on the AMD blow out away from the HS?? If my side vent had been blowing at it, would that have caused a problem causing my CPU to overheat??? I'm lost and too scared to work on my computer because it shuts off on me after short, non demanding use.
|
AfterDawn Addict
1 product review
|
7. April 2006 @ 16:38 |
Link to this message
|
|
byron02
Artic silver or any good thermal paste will help, but not if you're having serious heating problems. I look at thermal paste as "hedging my bet." I think that you might want to look at your room temps, check to see if your Case is well ventilated, check to make sure that your heatsink/fan is seated properly and then worry about thermal paste.:)
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
Member
|
7. April 2006 @ 17:12 |
Link to this message
|
|
You mean my HSF might not be seated correctly. Well that would make alot of sense. I always hate installing those things. I figured if it was locked on, and the latch was where it should be then it was on right. I'll check it out and let you know if that did it.
|
Member
|
7. April 2006 @ 17:30 |
Link to this message
|
OMG that was it. Thank you thank you thank you Sophocles. Only one side was locked down. CPU running at 35 right now (quite an improvement from mid 70's at startup. Now I just have my video card right. I made a post in the main forum, here...
http://forums.afterdawn.com/thread_view.cfm/327422
Last time I booted up and saw your message about the HSF, it booted up fine. Full res, full 32-bit color. Now, it's back to 640x480 at 4 bit.
Geeze. Well at least I can work on it without my PC shutting down.
This message has been edited since posting. Last time this message was edited on 7. April 2006 @ 17:32
|
|
Red_Maw
Senior Member
|
23. May 2006 @ 12:00 |
Link to this message
|
|
I'm going to be building a computer with these components:
AMD Athlon 64 4000+
Asus A8n32-Sli deluxe
VisionTek XTASY Radeon X850 XT 256mb PCIE
OCZ Titanium (2x1gb)
Maxtor DiamondMax 10 6V250F0 250GB 7200 RPM SATA 3.0Gb/s Hard Drive
2xCD drives
DVD drive
I will be overclocking the cpu and gpu so I expect to have a significant amount of heat. What should I get to keep it properly cooled?
thanks
edit: I will be using only one gpu at first, but hopefully will have another in 6 months.
This message has been edited since posting. Last time this message was edited on 23. May 2006 @ 16:35
|
AfterDawn Addict
1 product review
|
23. May 2006 @ 14:31 |
Link to this message
|
|
byron02
Isn't great when plan comes together? LOL
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
AfterDawn Addict
1 product review
|
23. May 2006 @ 14:32 |
Link to this message
|
|
eparker89
Could you post the rest of the stuff that you're going to be using? Do you intend to use SLI?
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. |
|
Red_Maw
Senior Member
|
29. May 2006 @ 16:18 |
Link to this message
|
|
Here is the full system.
AMD Athlon 64 4000+
Asus A8n32-Sli deluxe
VisionTek XTASY Radeon X850 XT 256mb PCIE ( I am not getting two to start with, but will buy another when I have more money)
OCZ Titanium (2x1gb)
Maxtor DiamondMax 10 6V250F0 250GB 7200 RPM SATA 3.0Gb/s Hard Drive
2xCD drives
DVD drive
I will be overclocking the cpu and gpu so I expect to have a significant amount of heat. What should I get to keep it properly cooled?
thanks
|
AfterDawn Addict
|
29. May 2006 @ 19:16 |
Link to this message
|
|
Deleted
 GO VOLS !This message has been edited since posting. Last time this message was edited on 30. May 2006 @ 08:52
|
AfterDawn Addict
1 product review
|
29. May 2006 @ 19:18 |
Link to this message
|
|
Hey bigo, long time no see.
When are you going to buy the stuff?
" Please Read!!! Post your questions only in This Thread or they will go unanswered:
Help with development of BD RB: Donations at: http://www.jdobbs.com/. This message has been edited since posting. Last time this message was edited on 29. May 2006 @ 20:05
|
|
Bartlome
Newbie
|
9. June 2006 @ 10:53 |
Link to this message
|
|
nevermind people no one wants to help
This message has been edited since posting. Last time this message was edited on 12. June 2006 @ 05:46
|
Senior Member
5 product reviews
|
26. June 2006 @ 09:39 |
Link to this message
|
|
Just thought id mention bit off topic for the current convo however.
Im running an Amd-San diego core 3700+ at 2.8Ghz at under load just below 45 degrees. Thats a good overclock and even better cooling. I have an Evo 33 Akasa and it really rocks. Especially the fan dial which comes with it.
Just thought id put in a small little review. If your thinking of getting it or want more just pm me!
|
|
FIHSNERD
Suspended permanently
|
27. June 2006 @ 03:36 |
Link to this message
|
|
yeah i can run myne a 2.68 stable.. but y take the chance??
i have an aftermarket cooler.. but my dad puts a **** load of Antec Silver on it..
it is an thermaltake silent cooler.. copper bottom.. and 4 heat pipes..
|
|
chappy89
Suspended due to non-functional email address
|
1. July 2006 @ 21:20 |
Link to this message
|
|
hey can u add extra fans to your computer
?????
|
|
Advertisement
|
|
|
|
Blu3water
Newbie
|
2. July 2006 @ 13:59 |
Link to this message
|
|
Back to first writer here :)
I have the same problem with Frozen throne, and i actually think its my Powersupply that is the problem :O/
Can i have an update on how you are working with the problem?
in advance - thx :)
:O
|
