|
DVD Cloner 11 copies but not like original?
|
|
|
finepics
Newbie
|
12. May 2004 @ 14:22 |
Link to this message
|
|
Until recently I have been happily using X-Copy Express. I have read the various negative remarks on the forums about it - but I have to say the backups I have made (about 40-50) have all been perfect. However, having read a glowing review of DVD Cloner 11, thoght I'd give it a try. The read and copy took 40 mins (One Hour Photo) but the copied disc starts with a blank screen. The title and lead in to the main menu do not seem to follow each other, so to play the film I had to manually select the Title and Chapter. Any ideas anyone? Perhaps better the devil I know but X-Copy Xpress now throws up an I/O error when it starts to write but then copies ok anyway!!
|
|
Advertisement
|
|
|
|
Moderator
|
12. May 2004 @ 16:03 |
Link to this message
|
|
Hi,
I've heard nothing but bad stuff about DVD Cloner. If you can, get your money back.
My killer sig came courtesy of bb "El Jefe" mayo.
The Forum Rules You Agreed To! http://forums.afterdawn.com/thread_view.cfm/2487
"And there we saw the giants, and we were in our own sight as grasshoppers, and so we were in their sight" - Numbers 13:33 |
|
rick5446
Suspended due to non-functional email address
|
12. May 2004 @ 16:14 |
Link to this message
|
|
|
|
finepics
Newbie
|
13. May 2004 @ 15:05 |
Link to this message
|
|
Thanks for that. Just tried Shrink. Very quick to rip (about 20mins) and on a par with XPress and Cloner. During the burn process it froze at 99% and I had to power off/reboot to free up the DVD drive. Movie was fine though, so this could be a Nero problem I guess. I like the flexibility of shrink - but I have to say for simplicity, and no difference in quality, it looks like XPress will still be my choice.
This message has been edited since posting. Last time this message was edited on 13. May 2004 @ 15:07
|
Member
|
15. May 2004 @ 19:27 |
Link to this message
|
|
DVD Cloner 2 would not work for me either. Half the time it would not read the DVD and I got error: Burn failed just about every time. I never made one single copy with it that would play on my stand alone or computer.
I was within my 30 days and after a dozen or more e-mails asking for my money back, I got e-mail that let me download a form to apply for my refund. Suppose to take 10 days and I am just waiting to see if it gives it to me.
I told them that I was blasting it on every forum that I posted on if they did not give me my money back.
Will be blasting it, if they dont's refund me my 59.95.
HP 7975 Pentium 4W/2.0 XP Home
1 GB RAM
Maxtor 80 GB and WD 80 GB (used for movies only)
Pioneer 116 DVD ROM,and BenQ 1640 Combo
|
|
sbajwa
Newbie
|
15. May 2004 @ 22:35 |
Link to this message
|
|
I have same very bad experience with DVD Cloner II. Almost every time reading failed, no burns.Software is deadly slow. No success with long movie. Only once, I got successful burn-Kangaroo Jack-after 1 hr and 45 mins.
After more than a dozen emails(Every time have to explain in detail), I have sent form for refund.
I am unable to understand, the quality of TOP TEN Reviews(DVD Cloner II is on top in that review).
|
Member
|
15. May 2004 @ 22:48 |
Link to this message
|
|
I know it was #1 in reviews. That is why I ordered it. They must be the one that came up with the biggest payoff.
Anyway, I hope they do send me my refund so I won't have to waste my time blasting them on the forum that recommended them.
HP 7975 Pentium 4W/2.0 XP Home
1 GB RAM
Maxtor 80 GB and WD 80 GB (used for movies only)
Pioneer 116 DVD ROM,and BenQ 1640 Combo
|
Moderator
|
16. May 2004 @ 00:05 |
Link to this message
|
|
Out of curiousity, where is this vaunted "Top Ten" where DVD Cloner was rated so high? Anybody have a link?
My killer sig came courtesy of bb "El Jefe" mayo.
The Forum Rules You Agreed To! http://forums.afterdawn.com/thread_view.cfm/2487
"And there we saw the giants, and we were in our own sight as grasshoppers, and so we were in their sight" - Numbers 13:33
|
|
Braxas
Junior Member
|
16. May 2004 @ 00:34 |
Link to this message
|
I've been looking for more flexibility in my backups as well. I've been finding a lot of the time I just simply don't want to keep the menus/extras and have started playing more with Shrink. I just backed up my copy of 2 Fast 2 Furious - that was a fun backup! Just to prove the point - I re-authored the DVD. 2 Fast 2 Furious has a "Prelude" that kind of fits the pieces together between The Fast and The Furious to 2 Fast 2 Furious so I put that first and dropped the movie in right behind it. I cut the credits out of the Prelude so it would jump right to the Universal logo which starts 2 Fast 2 Furious. Works very nicely I must say.
I'm not sure about the option with DVD Shrink that says something about, "Burn at least 30mm for higher DVD+R/RW compatibility" but I've been using it and so far all the backups have played perfectly on a very picky Zenith ABV341 (Allegro VHS/DVD unit) that I've tried it on - this is the most success I've had with Shrink/Nero by far and hope it continues. Using Ritek/Ridata (RICOHJPNR01) DVD+R's with my Liteon LDW-451S. For a free solution (If you already have Nero anyway) it does a fantastic job on par if not better than Nero Recode 2. Problem I had with Nero Recode 2 is it seemed to down-sample the sound since the backups weren't as loud as my originals. I don't have that issue with Shrink. Plus Shrink does not need an external program to rip the files to the hard drive, it does it all on it's own for the encryption/macrovision removing.
If you're having issues with Nero completing the burn, try dropping your speed down some, update firmware for your drive and also check what media you are using. If it's off-brand media try something like Ritek G04's (If you prefer DVD-R) or Ritek/Ridata DVD+R's (My preference). Ritek is pretty much compatible with any burner out there so it's a good solid choice to go with for compatibility purposes to eliminate other things that might be causing you problems.
|
|
clock
Junior Member
|
16. May 2004 @ 01:27 |
Link to this message
|
|
Hi guys
I was using that DVD x copy when I started and now I use Clone DVD and haven"t looked back works every time without fail , Its easy to use and leaves great picture.
cheers
|
Moderator
|
16. May 2004 @ 08:29 |
Link to this message
|
finepics and TMcCallie, I actually have DVDXCOPY Platinum, DVDCloner2 and also use DVDShrink with DVDDecrypter. The problem you are describing of DVDCloner going through the process, burning and ending up with a burned blank disc is easily fixed by updating your aspi layer. Either aspi will work 4.71 or 4.60. Try this.
http://www.afterdawn.com/guides/archive/aspisetup.cfm
|
Moderator
|
16. May 2004 @ 08:31 |
Link to this message
|
|
Also the speed is somewhere around 45min to 1 hour. The quality is great, and like using DVDShrink with DVDDecrypter you don't get the "DVD BACKUP" screen that xcopy gives you. Now don't forget the speed of your computer will affect the speed of the program.
I wouldn't knock dvdcloner2, only thing is that is cost money. Shrink and Decrypter are free.
This message has been edited since posting. Last time this message was edited on 16. May 2004 @ 08:32
|
|
brian100
Suspended due to non-functional email address
|
16. May 2004 @ 09:18 |
Link to this message
|
Quote:
Out of curiousity, where is this vaunted "Top Ten" where DVD Cloner was rated so high? Anybody have a link?
http://www.dvd-copy-software-review.com/dvd-cloner-ii-review.html
No DVD2one, Shrink, Pinnacle IC 7/8. Pathetic effort by this "Site". Makes me wanna hurl chunks.
Quote on Video qulity of CloneDVD:-
"The quality of the DVD copy was great." Tossers!!
Looking for my old AD This message has been edited since posting. Last time this message was edited on 16. May 2004 @ 09:26
|
Moderator
|
16. May 2004 @ 09:27 |
Link to this message
|
|
|
Moderator
|
16. May 2004 @ 09:32 |
Link to this message
|
|
All of you who are having problems with DVDCloner2, again update your aspi layer to v4.71 or v4.60. The program is simple, produces backup quality that matches shrink w/decrypter. Only thing is it's $60 bucks for the one click option.
|
Member
|
16. May 2004 @ 17:06 |
Link to this message
|
|
Flip218....
I have updated my aspi and this did not correct the problem either.
The fact is it just will not work for me. I tried everything that the tech support for DVDCloner 2 told me to do and would not work, period.
I used DVD Decrypter/DVD Shrink/Nero 6.0 and also Clone DVD 2. They work fine for me where DVD Cloner2 did not.
I also use DVDFab / DVD Cloner 2 and it works well also.
If you want to PM me, I will give you the low down on DVDFab.
I will hunt the site where it shows DVD Cloner2 to be #1.
Will put it on this forum when I FIND IT.
HP 7975 Pentium 4W/2.0 XP Home
1 GB RAM
Maxtor 80 GB and WD 80 GB (used for movies only)
Pioneer 116 DVD ROM,and BenQ 1640 Combo
|
Moderator
|
16. May 2004 @ 17:43 |
Link to this message
|
Thanks for the links fellas. What a couple of sorry ass sites. No wonder so many people get swindled into buying garbage. One of the sites listed "DVD Squeeze" which is on the DVD Decrypter website as being nothing more than a collection of free tools that they charge for.
My killer sig came courtesy of bb "El Jefe" mayo.
The Forum Rules You Agreed To! http://forums.afterdawn.com/thread_view.cfm/2487
"And there we saw the giants, and we were in our own sight as grasshoppers, and so we were in their sight" - Numbers 13:33
|
Moderator
|
16. May 2004 @ 18:00 |
Link to this message
|
TMcCallie which aspi layer did you try? If you did v4.71 there is a aspicheck. In XP you only need 2 of the four. Peoples biggest problem in trying to update to aspi 4.71 on XP end up installing the layer for operating systems other than XP. Have you tried ForceASPI? That has worked for some. Now if you did do 4.71 the way you install it is.
1) click start, then run
2) browse, then click local disk c: (that's where most usually unzip the file to)
3) click adaptec, then aspi, then install, then ok
It should look as follows:
C:\adaptec\aspi\install.bat
4) then you need to add xp32
C:\adaptec\aspi\install.bat xp32
5) then click ok.
to see if you've installed it correctly:
click my computer --> c drive --> adaptec folder --> aspi --> then click aspichk.
If you've done it right only these two will say 4.71.2
ASPI32.SYS & WNASPI32.DLL
Then shut down and reboot.
|
|
sbajwa
Newbie
|
16. May 2004 @ 19:04 |
Link to this message
|
TMcCallie
Today I got full refund from DVD ClonerII. Hopfully you will also get refund.Unfortunately I was unable to see any positive thing about DVD ClonnerII- Deadly slow, always failure after long reading time.I also followed every direction given by their support team, even HD option and bought Nero (as according to support team, it was required.
I think Shrink/Decrypter-free, is the best choice.
|
|
Advertisement
|
|
|
|
forkndave
Member
|
16. May 2004 @ 20:45 |
Link to this message
|
|
I notice that the web site that rates DVD Cloner 2 #1 has DVD Wizard Pro as #5. That isn't even a burning program. It is just guides and links to where you can get burning software. They don't give refunds either. They say that they will give a refund only if their software won't run on your computer. Since their software is essentially just text, there's not much chance of that.
|
