|
|
|
unable to burn svcd bin file
|
|
|
caucano
Member
|
28. July 2004 @ 13:34 |
Link to this message
|
|
Hello,
I have searched the forums and learned how to burn the cue/bin files using alcohol 120% and nero 6. I have tried both softwares to no avail. I think maybe the bin file is corrupt but I dont know how to find this out. I have the error logs of both alcohol 120% and of nero 6, if they would help in any diagnostic, let me know and i'll post them.
Thank you
|
|
aldaco12
AfterDawn Addict
|
29. July 2004 @ 01:59 |
Link to this message
|
|
It can only be corrupt. Use CDMage and 'scan for corruption' the image. It happens, sometimes...or maybe the .CUE specifies the "C:\strange_directory\image.BIN" and not only "image.BIN" that, by default, makes Nero/Alcohol 120%/CDRWin search the .BIN in the same directory of the .CUE (then correct it with Notepad).
CDMage prevents to burn 'coasters' but the software could at least 'burn' it, without giving errors (what happened?). More, if you can 'mount' a correct image and scan it with Clony XXL you can detect its protection, if any (but some protection will need .SUB, .MDS formats, not simple .CUE/.BIN sets).
|
|
caucano
Member
|
29. July 2004 @ 07:26 |
Link to this message
|
Hey aldaco12,
Thanks for the reply! I scanned the .bin file for errors as you suggested and CDMage found none. I then checked the .cue file for an incorrect path name; I found "image" instead of "image.BIN". I changed it retried the burning and again it failed. I even tried extracting the mpg file from the bin file using isobuster, then tried burning the mpg file (~800MB) using Nero and the same error occurred. Are there some sort of system requirements for burning an image? I also re-downloaded the image file and still same problem. I'll post the log file for Nero and alcohol to see if it helps.
*******************************************************
********************** Nero LOG FILE ******************
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 3:25:04 PM
Nero version: 6.0.0.23 (Nero Express)
Recorder: <PLEXTOR CD-R PX-W8432T>Version: 1.09 - HA 1 TA 0 - 6.0.0.23
Adapter driver: <atapi> HA 1
Drive buffer : 4096kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PLEXTOR CD-R PX-W8432T>Version: 1.09 - HA 1 TA 0 - 6.0.0.23
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : PLEXTOR CD-R PX-W8432T atapi Port 1 ID 0 DMA: On
CdRomPeripheral : COMPAQ CD-ROM CDU701-Q atapi Port 1 ID 1 DMA: Off
DiskPeripheral : COMPAQ HB00441AA2 5541 symc8xx Port 2 ID 0 DMA: Off
DiskPeripheral : COMPAQPCDDRS-34560W S99C symc8xx Port 2 ID 4 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a axwhisky Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR CD-R PX-W8432T E: CDRom0
COMPAQ CD-ROM CDU701-Q F: CDRom1
AXV CD/DVD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 127MB (130608kB)
Free physical memory: 23MB (24124kB)
Memory in use : 81 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.7.2004
CueSheet
4:05:07 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
4:05:07 PM #2 Text 0 File Writer.cpp, Line 124
Writer PLEXTOR CD-R PX-W8432T running
4:05:07 PM #3 Text 0 File Burncd.cpp, Line 3218
Turn on Disc-at-once, using CD-R/RW media
4:05:07 PM #4 Text 0 File DlgWaitCD.cpp, Line 233
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 355153 (78:57.28)
4:05:07 PM #5 Text 0 File DlgWaitCD.cpp, Line 238
Write in overburning mode: FALSE
4:05:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 1997
Recorder: PLEXTOR CD-R PX-W8432T;
CDRW code: 00 97 26 65; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
4:05:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 398
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:05:07 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 773
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 506 (506) = #506/0:6.56
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 506 blocks [PLEXTOR CD-R PX-W8432T]
1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (0) provided
original disc pos #0 + 354648 (354648) = #354648/78:48.48
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 354648 blocks [PLEXTOR CD-R PX-W8432T]
--------------------------------------------------------------
4:05:07 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 942
Prepare recorder [PLEXTOR CD-R PX-W8432T] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 1542912, ISRC ""
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1542912 1542912 835675008, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
506 | 2 | 0 | 0x00 | 0x41
506 | 2 | 1 | 0x00 | 0x41
355154 | lead-out | 1 | 0x00 | 0x41
4:05:10 PM #10 Phase 24 File dlgbrnst.cpp, Line 1803
Caching of files started
4:05:10 PM #11 Phase 25 File dlgbrnst.cpp, Line 1803
Caching of files completed
4:05:10 PM #12 Phase 36 File dlgbrnst.cpp, Line 1803
Burn process started at 4x (600 KB/s)
4:05:10 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2146
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
4:05:10 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2146
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #506
4:05:10 PM #15 Text 0 File Mmc.cpp, Line 14897
StartDAO : CD-Text - Off
4:05:10 PM #16 Text 0 File Mmc.cpp, Line 15217
CueData, Len=40
41 00 00 34 00 00 00 00
41 01 00 21 00 00 00 00
41 01 01 21 00 00 02 00
41 02 01 21 00 00 08 38
41 aa 01 34 00 4e 39 1d
4:05:13 PM #17 SCSI -400 File Cdrdrv.cpp, Line 1427
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A80000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00
4:05:13 PM #18 CDR -400 File Writer.cpp, Line 301
Unspecified target error
4:05:13 PM #19 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
4:05:13 PM #20 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
4:05:13 PM #21 Text 0 File dlgbrnst.cpp, Line 1661
Set remaining time: 0:00,000 (0ms) -> OK
4:05:13 PM #22 Phase 38 File dlgbrnst.cpp, Line 1803
Burn process failed at 4x (600 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 4:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
*******************************************************
****************** ALCOHOL LOG FILE *******************
###################### Source Disc/Image Information ######################
Type: CDRWIN Image file
Path: D:\
Name: ctp-f911a.cue
ctp-f911a.bin
Size: 796.62 MB
Session: 1
Track: 2
Session 01:
Track 01: Mode 2 Form 1, Length: 000356(712 KB), Address: 000000
Track 02: Mode 2 Form 2, Length: 354648(692.7 MB), Address: 000506
#############################################################################
####################### Dumping/Recording Progress Log #######################
PM 04:09:24 Processor info: Pentium III (0.25 um) (498MHz)
PM 04:09:24 Memory Available to Windows: 130,608 KB
PM 04:09:24 Not enough Memory! Adjust memory buffer size to 36 MB.
PM 04:09:25 Image file loading: D:\ctp-f911a.cue
PM 04:09:25 Source Info: Session: 1, Track: 2, Length: 693.7 MB / 078:55:29
PM 04:09:29 (E:) PLEXTOR CD-R PX-W8432T (1:0): Recording Method/Speed
PM 04:09:29 Recording - DAO / SAO - 2X (300 KB/Sec)
PM 04:09:30 (E:) PLEXTOR CD-R PX-W8432T (1:0) - [Write PREGAP area ERROR]: -0000150 - 00000000
S:KEY - 05/27/00 - "Undocumented Error Message!"
PM 04:09:30 (E:) PLEXTOR CD-R PX-W8432T (1:0): Recording failed!
PM 04:09:30 Error message: [05/27/00] - Undocumented Error Message!
PM 04:09:30 (E:) PLEXTOR CD-R PX-W8432T (1:0): Recording failed!
PM 04:09:30 Image file loading aborted!
PM 04:09:36 Something is wrong with the recording procedure!
Please check the log file and report any errors to Technical Support.
##############################################################################
|
|
Advertisement
|
|
|
|
caucano
Member
|
29. July 2004 @ 08:06 |
Link to this message
|
|
I tried simulating the burn with a regular cd-r 80Min and it seemed to work. I am trying to burn the bin file to a cdrw 80Min and I think that is the problem. I have updated the firmware of my plexwriter 8/4/32 but nothing changes. Any suggestions? I'll try the plextor support forums also.
|
|
