|
|
|
Computer Temp.
|
|
|
Enigma346
Junior Member
|
12. June 2012 @ 10:19 |
Link to this message
|
So I am curious as to what the running temps of a computer should be. I have a Q6600 overclocked to 3.2GHz. I have the Tuniq Tower 120 below half for its fan speed. I would like to know safe operating ranges for my computer so I don't cause damage to it. Here is where it is as it stands right now.
CPUID HWMonitor Report
-------------------------------------------------------------------------
Binaries
-------------------------------------------------------------------------
HWMonitor version 1.1.9.0
Monitoring
-------------------------------------------------------------------------
Mainboard Model EP45-UD3P (0x00000247 - 0x02D9A9F8)
LPCIO
-------------------------------------------------------------------------
LPCIO Vendor ITE
LPCIO Model IT8718
LPCIO Vendor ID 0x90
LPCIO Chip ID 0x8718
LPCIO Revision ID 0x5
Config Mode I/O address 0x2E
Config Mode LDN 0x4
Config Mode registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 87 18 05 40 00 01 FF 3F 01 88 01 00 01 00 00 00
30 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 02 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 02 00 00 04 04 00 00 00 00 00 00 00 00 00 00
Register space LPC, base address = 0x0290
Hardware Monitors
-------------------------------------------------------------------------
Hardware monitor ITE IT87
Voltage 0 1.42 Volts [0x59] (CPU VCORE)
Voltage 1 2.08 Volts [0x82] (DDR)
Voltage 2 3.33 Volts [0xD0] (+3.3V)
Voltage 3 4.92 Volts [0xB7] (+5V)
Voltage 7 12.10 Volts [0xBD] (+12V)
Voltage 8 3.15 Volts [0xC5] (VBAT)
Temperature 0 48°C (118°F) [0x30] (System)
Temperature 1 45°C (112°F) [0x2D] (CPU)
Fan 0 1834 RPM [0x170] (FANIN0)
Fan PWM 0 0 pc [0x0] (FANPWM0)
Fan PWM 1 0 pc [0x0] (FANPWM1)
Fan PWM 2 0 pc [0x0] (FANPWM2)
Register space LPC, base address = 0x0290
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 13 10 00 00 FF FF 00 37 FF 87 54 09 17 70 FF FF
10 FF FF FF 76 D7 FD FC FD 01 FF FF FF FF FF FF FF
20 59 82 D0 B7 20 07 06 BD C5 30 2D FE 80 82 CC CC
30 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00
40 7F 7F 7F 7F 7F 7F 5F 74 2D 40 9C 22 FF FF FF FF
50 FF 2A 7F 7F 7F 50 F9 F9 90 F9 07 12 60 00 00 00
60 00 14 41 23 90 03 FF FF 00 14 41 23 90 03 FF FF
70 00 14 41 23 90 03 FF FF FF FF FF FF FF FF FF FF
80 FF FF 00 00 FF FF 00 00 00 00 00 00 00 00 02 02
90 FF 00 00 00 FF 00 00 00 FF FF FF FF FF FF FF FF
A0 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF FF
B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Hardware monitor AMD ADL
Voltage 0 0.95 Volts [0x3B5] (VIN0)
Temperature 0 50°C (121°F) [0x32] (TMPIN0)
Processors
-------------------------------------------------------------------------
Number of processors 1
Number of threads 4
APICs
-------------------------------------------------------------------------
Processor 0
-- Core 0
-- Thread 0 0
-- Core 2
-- Thread 0 2
-- Core 3
-- Thread 0 3
-- Core 1
-- Thread 0 1
Processors Information
-------------------------------------------------------------------------
Processor 1 ID = 0
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core 2 Quad Q6600
Codename Kentsfield
Specification Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Package (platform ID) Socket 775 LGA (0x4)
CPUID 6.F.B
Extended CPUID 6.F
Core Stepping G0
Technology 65 nm
Core Speed 2400.1 MHz
Multiplier x FSB 6.0 x 400.0 MHz
Rated Bus speed 1600.0 MHz
Stock frequency 2400 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T, VT-x
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 4096 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 9.0x
Max VID 1.325 V
Thread dumps
-------------------------------------------------------------------------
CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Type 01008005h
Max CPUID level 0000000Ah
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 1 thread(s)
Cache descriptor Level 1, I, 32 KB, 1 thread(s)
Cache descriptor Level 2, U, 4 MB, 2 thread(s)
CPU Thread 1
APIC ID 2
Topology Processor ID 0, Core ID 2, Thread ID 0
Type 01008005h
Max CPUID level 0000000Ah
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 1 thread(s)
Cache descriptor Level 1, I, 32 KB, 1 thread(s)
Cache descriptor Level 2, U, 4 MB, 2 thread(s)
CPU Thread 2
APIC ID 3
Topology Processor ID 0, Core ID 3, Thread ID 0
Type 01008005h
Max CPUID level 0000000Ah
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 1 thread(s)
Cache descriptor Level 1, I, 32 KB, 1 thread(s)
Cache descriptor Level 2, U, 4 MB, 2 thread(s)
MSR 0x00000199 0x00000000 0x0000061B
CPU Thread 3
APIC ID 1
Topology Processor ID 0, Core ID 1, Thread ID 0
Type 01008005h
Max CPUID level 0000000Ah
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 1 thread(s)
Cache descriptor Level 1, I, 32 KB, 1 thread(s)
Cache descriptor Level 2, U, 4 MB, 2 thread(s)
Storage
-------------------------------------------------------------------------
USB Device USB Composite Device, class=0x00, subclass=0x00, vendor=0x1532, product=0x0109
USB Device USB Input Device, class=0x00, subclass=0x00, vendor=0x046D, product=0xC069
USB Device USB Composite Device, class=0x00, subclass=0x00, vendor=0x04B8, product=0x0870
Graphic APIs
-------------------------------------------------------------------------
API ATI I/O
API ADL SDK
Display Adapters
-------------------------------------------------------------------------
Display adapter 0
Name Radeon HD 6850
Codename Barts
Technology 40 nm
Memory type GDDR5
GPU ref clock 27000
PCI device bus 1 (0x1), device 0 (0x0), function 0 (0x0)
Vendor ID 0x1002 (0x1458)
Model ID 0x6739 (0x21F8)
|
|
Advertisement
|
 |
|
|
|
ddp
Moderator
|
12. June 2012 @ 11:29 |
Link to this message
|
|
your temp is alright. if in the 60's or higher then start worrying.
|
|
Enigma346
Junior Member
|
12. June 2012 @ 11:46 |
Link to this message
|
|
Thank for the quick reply.
|
|
ddp
Moderator
|
12. June 2012 @ 11:47 |
Link to this message
|
|
no problem.
|
|
Enigma346
Junior Member
|
12. June 2012 @ 15:58 |
Link to this message
|
So I set my comp back to default because when I ran the prime95 Blend test my computer crashed less than 2 minutes into it....Not sure if I was supposed to run that test or not. I set my overclock back to default which is 2.4GHz for my processor. I ran Prime95 again, this time on In-place large FFTs. Supposed to cause maximum heat, power consumption and some RAM. My Build is this. Keep in mind I only ran the Prime95 test for 10 minutes.
Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Quad-Core Processor
CORSAIR DOMINATOR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500)
Western Digital Caviar Blue WD5000AAJS 500GB 7200 RPM SATA 3.0Gb/s 3.5" Hard Drive -Bare Drive
Tuniq Tower 120 Universal CPU Cooler 120mm Cooling Fan and Fan Controller/Heatsink
PC Power and Cooling S75CF 750W EPS12V SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply
GIGABYTE GA-EP45-UD3P LGA 775 Intel P45 ATX Intel Motherboard
SAPPHIRE 100245L Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card
NZXT Guardian 921 CS-NT-GD921-B Black Steel ATX Mid Tower Computer Case
It seems to me I should be able to overclock and keep cooler temps that what I am getting.
CPUID HWMonitor Report
-------------------------------------------------------------------------
Binaries
-------------------------------------------------------------------------
HWMonitor version 1.1.9.0
Monitoring
-------------------------------------------------------------------------
Mainboard Model EP45-UD3P (0x00000247 - 0x02D9A9F8)
LPCIO
-------------------------------------------------------------------------
LPCIO Vendor ITE
LPCIO Model IT8718
LPCIO Vendor ID 0x90
LPCIO Chip ID 0x8718
LPCIO Revision ID 0x5
Config Mode I/O address 0x2E
Config Mode LDN 0x4
Config Mode registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 87 18 05 40 00 01 FF 3F 01 88 01 00 01 00 00 00
30 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 02 90 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 02 00 00 04 04 00 00 00 00 00 00 00 00 00 00
Register space LPC, base address = 0x0290
Hardware Monitors
-------------------------------------------------------------------------
Hardware monitor ITE IT87
Voltage 0 1.26 Volts [0x4F] (CPU VCORE)
Voltage 1 2.08 Volts [0x82] (DDR)
Voltage 2 3.33 Volts [0xD0] (+3.3V)
Voltage 3 4.92 Volts [0xB7] (+5V)
Voltage 7 12.10 Volts [0xBD] (+12V)
Voltage 8 3.15 Volts [0xC5] (VBAT)
Temperature 0 52°C (125°F) [0x34] (System)
Temperature 1 49°C (120°F) [0x31] (CPU)
Fan 0 1979 RPM [0x155] (FANIN0)
Fan 3 33 RPM [0x4EFF] (FANIN3)
Fan PWM 0 0 pc [0x0] (FANPWM0)
Fan PWM 1 0 pc [0x0] (FANPWM1)
Fan PWM 2 0 pc [0x0] (FANPWM2)
Register space LPC, base address = 0x0290
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 13 10 00 00 FF FF 00 37 FF 87 54 09 17 56 FF FF
10 FF FF FF 76 D7 FD FC FD 01 FF FF FF FF FF FF FF
20 4F 82 D0 B7 0D 03 06 BD C5 34 31 FE 80 D7 9A 9A
30 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00 FF 00
40 7F 7F 7F 7F 7F 7F 5F 74 2D 40 9C 22 FF FF FF FF
50 FF 2A 7F 7F 7F 50 F9 F9 90 F9 07 12 60 00 00 00
60 00 14 41 23 90 03 FF FF 00 14 41 23 90 03 FF FF
70 00 14 41 23 90 03 FF FF FF FF FF FF FF FF FF FF
80 FF FF 00 00 FF FF 00 00 00 00 00 00 00 00 02 02
90 FF 00 00 00 FF 00 00 00 FF FF FF FF FF FF FF FF
A0 00 00 00 00 00 00 00 FF FF FF FF FF FF FF FF FF
B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Hardware monitor AMD ADL
Voltage 0 0.95 Volts [0x3B5] (VIN0)
Temperature 0 53°C (127°F) [0x35] (TMPIN0)
Processors
-------------------------------------------------------------------------
Number of processors 1
Number of threads 4
APICs
-------------------------------------------------------------------------
Processor 0
-- Core 0
-- Thread 0 0
-- Core 3
-- Thread 0 3
-- Core 1
-- Thread 0 1
-- Core 2
-- Thread 0 2
Processors Information
-------------------------------------------------------------------------
Processor 1 ID = 0
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name Intel Core 2 Quad Q6600
Codename Kentsfield
Specification Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Package (platform ID) Socket 775 LGA (0x4)
CPUID 6.F.B
Extended CPUID 6.F
Core Stepping G0
Technology 65 nm
Core Speed 1600.1 MHz
Multiplier x FSB 6.0 x 266.7 MHz
Rated Bus speed 1066.7 MHz
Stock frequency 2400 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T, VT-x
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 2 x 4096 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 9.0x
Max VID 1.325 V
Thread dumps
-------------------------------------------------------------------------
CPU Thread 0
APIC ID 0
Topology Processor ID 0, Core ID 0, Thread ID 0
Type 01008005h
Max CPUID level 0000000Ah
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 1 thread(s)
Cache descriptor Level 1, I, 32 KB, 1 thread(s)
Cache descriptor Level 2, U, 4 MB, 2 thread(s)
CPU Thread 1
APIC ID 3
Topology Processor ID 0, Core ID 3, Thread ID 0
Type 01008005h
Max CPUID level 0000000Ah
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 1 thread(s)
Cache descriptor Level 1, I, 32 KB, 1 thread(s)
Cache descriptor Level 2, U, 4 MB, 2 thread(s)
CPU Thread 2
APIC ID 1
Topology Processor ID 0, Core ID 1, Thread ID 0
Type 01008005h
Max CPUID level 0000000Ah
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 1 thread(s)
Cache descriptor Level 1, I, 32 KB, 1 thread(s)
Cache descriptor Level 2, U, 4 MB, 2 thread(s)
CPU Thread 3
APIC ID 2
Topology Processor ID 0, Core ID 2, Thread ID 0
Type 01008005h
Max CPUID level 0000000Ah
Max CPUID ext. level 80000008h
Cache descriptor Level 1, D, 32 KB, 1 thread(s)
Cache descriptor Level 1, I, 32 KB, 1 thread(s)
Cache descriptor Level 2, U, 4 MB, 2 thread(s)
Storage
-------------------------------------------------------------------------
USB Device USB Composite Device, class=0x00, subclass=0x00, vendor=0x1532, product=0x0109
USB Device USB Input Device, class=0x00, subclass=0x00, vendor=0x046D, product=0xC069
USB Device USB Composite Device, class=0x00, subclass=0x00, vendor=0x04B8, product=0x0870
Graphic APIs
-------------------------------------------------------------------------
API ATI I/O
API ADL SDK
Display Adapters
-------------------------------------------------------------------------
Display adapter 0
Name Radeon HD 6850
Codename Barts
Technology 40 nm
Memory type GDDR5
GPU ref clock 27000
PCI device bus 1 (0x1), device 0 (0x0), function 0 (0x0)
Vendor ID 0x1002 (0x1458)
Model ID 0x6739 (0x21F8)
This message has been edited since posting. Last time this message was edited on 12. June 2012 @ 15:59
|
AfterDawn Addict
|
12. June 2012 @ 18:49 |
Link to this message
|
See my reply in your thread here. If your overclock isn't stable then it will indeed crash pretty quickly running something like Prime95 (IIRC, blend test is a mix of CPU/RAM). Around 50 degrees on a stress test with Prime95 for your default clock is fine, probably means you're running normally at 35-40 degrees. Your cooler should be sufficient and I'm presuming you have a reasonably standard airflow going through your case. You don't really want to be getting any hotter than 65 on a stress test when you're overclocked.
How far were you overclocking? From my limited reading, it seems you should be able to get to 3GHz with a small increase in voltage and still keep things stable.
Might want to take a look at this and do some general reading around.
This message has been edited since posting. Last time this message was edited on 12. June 2012 @ 18:50
|
|
Enigma346
Junior Member
|
12. June 2012 @ 18:56 |
Link to this message
|
|
3.2GHz was where I was at.
|
AfterDawn Addict
|
12. June 2012 @ 19:00 |
Link to this message
|
|
Have you overclocked properly before?
|
|
Enigma346
Junior Member
|
12. June 2012 @ 20:01 |
Link to this message
|
|
Yeah. This worked for the longest time. Just now about 2 years later this happens.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
13. June 2012 @ 07:15 |
Link to this message
|
|
Sorry, I see you mentioned your original overclock in the OP. Did you do any stress testing initially when you first built the PC to test stability at higher temperatures/strain?
I'm not entirely sure what the problem is - your PC is running at safe temperatures at standard clock speed, your overclock was running fine (?) until you put it through some actual testing and found it overheats/crashes? What are you trying to achieve?
I mean technically processors can operate up to 100+ degrees but that's obviously not a safe operating temperature for any sort of daily use.
|
|
