2) Using EJECT EXPLOIT insert AR MAX EVO DVD and hit X
3) Make sure you scroll down on the Black and White screen to the
option entitled RESET IOP. Change this to always. Hit X to run
DVDLOADER
4) At the DVDLOADER screen hit X and you will have a menu. Select
AR MAX and hit X to load AR MAX EVO
5) Enter Expert Mode to find your desired codes and hit START
6) At this point AR MAX EVO Will prompt you to eject and insert game
Disc - DO NOT EJECT, just hit start game with codes then X and wait for
the Black and White screen to load. Dont worry about the IOP option just
hit X and let DVDLOADER load up.
6) To Stop your disc from spinning in the disc tray you will need to hit
the Triangle button.
7) The Screen will lose a few words and and this is when you will need to
use whatever EJECT EXPLOIT you use to insert the SWAP MAGIC DVD Disc
8) Now hit Triangle once again and the disc will start to spin and the
screen will reload. Now hit the X Button.
9) a red screen should come up prompting you to swap dvd with EA method,
Don't worry as all you need to do is use your EJECT EXPLOIT and insert the
DVD game backup you want to run with codes. HIT X
VOILA!!
You are now running your DVD BACKUP game with codes from a BACKUP AR MAX.
My Problem is with Number 6.
Instead of stopping the disc, after I press Triangle my PS2 actually Ejects the Ar Max disc automatically. The blue button on my ps2 lights up and it ejects the disc tray.
This ruins all further steps.
I followed the above rules verbatim but I keep ending up with the same results at number 6.. it just ejects everytime.. And I can't use the EJECT EXPLOIT as a bypass at number six because the disc is still spinning.
Is there another way to stop the disc from spinning at number 6?
What am I doing wrong?
thanks for your help
edit 1 : I should note that I'm using an AR Max found at
h t t p : / / t h e p i r a t e b a y . o r g /torrent/3496935/AR_Max_EVO_-_Swap_Magic_Edition
The Swap Magic Edition of AR Max.
edit 2 : I'm attempting to play a backup of God of War. It works with the Swap Disc method but the point here is to get it to work with AR Max Codes.
OKay, I'll explain for any others getting the same problem.
Follow the rules up to number 6.
In the notes it says to use the EJECT EXPLOIT method for number 6, but when I (you) press Triangle it ejects the disc. It's okay because ***You DO NOT have to use the EJECT EXPLOIT method here**
So after pressing Triangle, when the tray opens, Just put your Swap Magic disc in and press Triangle once more.
Now it'll most likely say Invalid ps2 Disc on the bottom left hand corner of the screen.. the error message telling you it doesn't recognize your Swap Disc.
Fine, this is what you want.
Now press Triangle twice quickly. Your disc tray should open half ways and then close.
NOW it will read PS2 Disc on the bottom left hand screen.
If it doesn't work on your first try, keep pressing Triangle twice till it reads the Swap Disc as a PS2 Disc. Don't worry, it won't erase your codes.
You'll end up at Step Number 9. Follow the rules given and This Will WOrk. I'm about to Destroy God of War.. FINALLY
edit 1 : explained method a little clearer. if you need further help plz post here and I'll attempt to help out as much as possible