1- Drive was flashed with LT-Plus 1.1
2- I tried to flash it with LT-Plus 2.0 using JungleFlasher
3- Drive became undetectable by JungleFlasher
4- When i do "Intro/Device ID" drive gets into vendor mode
5- I press read .it reads all banks and i get the following
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Lite-On Dump file saved to Lite-OFW.bin
Loading firmware from buffer
Parse Failed !
Loading MTK_Flash source file
6- when i try to flash the drive i get the following
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data copied from Source to Target
Sending Chip Erase to Port 0xD000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !
Hi
i have done what you said and got this far any help appriciated
if you could please explain to me how to update the drive with a usb flash stick or newer game title update,
Loading firmware file C:\orig-93450C.bin
MD5 hash: d4927445d0dd3523bccb6585fc30bd28
Drive key @ n/a 77777777777777777777777777777777
Firmware Osig: [PLDS DG-16D2S 9345]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Inquiry string copied to Target
Identify string copied to Target
Serial data copied from Source to Target
Getting Status from port 0xFC00
SPi flash found with Status 0x72
Sending Chip Erase to Port 0xFC00
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !
Originally posted by antom: Hi
i have done what you said and got this far any help appriciated
if you could please explain to me how to update the drive with a usb flash stick or newer game title update,
Loading firmware file C:\orig-93450C.bin
MD5 hash: d4927445d0dd3523bccb6585fc30bd28
Drive key @ n/a 77777777777777777777777777777777
Firmware Osig: [PLDS DG-16D2S 9345]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Inquiry string copied to Target
Identify string copied to Target
Serial data copied from Source to Target
Getting Status from port 0xFC00
SPi flash found with Status 0x72
Sending Chip Erase to Port 0xFC00
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !
Download the $systemupdate from microsoft's website. Copy the file directly to the root of a USB thumbdrive. Make sure the folder is not compressed (zipped, rar'd, 7zip, etc.. Put the USB drive in the 360 and then turn it on. It should prompt you for a system update. The alternative is to take a retail copy of a new game that has the current dashboard update. When you try to play the game, it will update the dashboard. Until LT3 is out, I would stay offline just in case.
Originally posted by antom: Hi
i have done what you said and got this far any help appriciated
if you could please explain to me how to update the drive with a usb flash stick or newer game title update,
Loading firmware file C:\orig-93450C.bin
MD5 hash: d4927445d0dd3523bccb6585fc30bd28
Drive key @ n/a 77777777777777777777777777777777
Firmware Osig: [PLDS DG-16D2S 9345]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Inquiry string copied to Target
Identify string copied to Target
Serial data copied from Source to Target
Getting Status from port 0xFC00
SPi flash found with Status 0x72
Sending Chip Erase to Port 0xFC00
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !
Download the $systemupdate from microsoft's website. Copy the file directly to the root of a USB thumbdrive. Make sure the folder is not compressed (zipped, rar'd, 7zip, etc.. Put the USB drive in the 360 and then turn it on. It should prompt you for a system update. The alternative is to take a retail copy of a new game that has the current dashboard update. When you try to play the game, it will update the dashboard. Until LT3 is out, I would stay offline just in case.
Hi
i have done everything you said but i got this error
system error
contact xbox customer support
E64 www.xbox.com/support
any help please
Originally posted by antom: Hi
i have done what you said and got this far any help appriciated
if you could please explain to me how to update the drive with a usb flash stick or newer game title update,
Loading firmware file C:\orig-93450C.bin
MD5 hash: d4927445d0dd3523bccb6585fc30bd28
Drive key @ n/a 77777777777777777777777777777777
Firmware Osig: [PLDS DG-16D2S 9345]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Inquiry string copied to Target
Identify string copied to Target
Serial data copied from Source to Target
Getting Status from port 0xFC00
SPi flash found with Status 0x72
Sending Chip Erase to Port 0xFC00
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !
Download the $systemupdate from microsoft's website. Copy the file directly to the root of a USB thumbdrive. Make sure the folder is not compressed (zipped, rar'd, 7zip, etc.. Put the USB drive in the 360 and then turn it on. It should prompt you for a system update. The alternative is to take a retail copy of a new game that has the current dashboard update. When you try to play the game, it will update the dashboard. Until LT3 is out, I would stay offline just in case.
Hi
i have done everything you said but i got this error
system error
contact xbox customer support
E64 www.xbox.com/support
any help please
many thanks
did you flash the drive to stock before you updated? I believe that's why your getting the error..
