|
|
|
Problem with burning discs using ImgBurn
|
|
|
hwalsh01
Junior Member
|
21. May 2011 @ 10:34 |
Link to this message
|
I recently flashed my lite-on drive to xtreme 1.61 i then downloaded fable 3 and created the .dvd file with the layerbreak value before burning it with imgburn, this played perfectly, i then burnt dynasty warriors 7 and foolishly it asked me to update my xbox software, i agreeded.
Now however fable 3 doesnt work at all, it boots up to a black screen, i tried using the activation iso disk but this didnt help either.
after some reading it lead me to believe it was to do with AP25 as i hadnt patched it through abgx360. i then did this and tried to reburn the .dvd with ImgBurn but then i get a write error(log below). This is also the same error which i got when i tried to burn F1 2010. any ideas? much appreciated.
Quote:
I 14:01:43 ImgBurn Version 2.5.5.0 started!
I 14:01:43 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 2)
I 14:01:43 Total Physical Memory: 3,125,312 KB - Available: 2,263,540 KB
W 14:01:43 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 14:01:43 Initialising SPTI...
I 14:01:43 Searching for SCSI / ATAPI devices...
I 14:01:43 -> Drive 1 - Info: HL-DT-ST DVDRWBD GBC-H20N C102 (I:) (ATA)
I 14:01:43 -> Drive 2 - Info: MagicISO Virtual DVD-ROM 1.0A (L:) (Unknown)
I 14:01:43 -> Drive 3 - Info: XIN NOLIBWX 1.03 (K:) (SCSI)
I 14:01:43 Found 1 DVD-ROM, 1 BD-ROM/HD DVD-ROM and 1 BD-ROM/DVD±RW!
W 14:02:48 User accepted disc space warning and is attempting to underburn!
I 14:02:48 Operation Started!
I 14:02:48 Source File: D:\Documents and Settings\Administrator\Desktop\activate\activate.iso
I 14:02:48 Source File Sectors: 129,824 (MODE1/2048)
I 14:02:48 Source File Size: 265,879,552 bytes
I 14:02:48 Source File Volume Identifier: XBOX360
I 14:02:48 Source File Volume Set Identifier: 33479a57
I 14:02:48 Source File Implementation Identifier: Daikin U.S. Comtec Lab
I 14:02:48 Source File File System(s): ISO9660, UDF (1.02)
I 14:02:48 Destination Device: [1:0:0] HL-DT-ST DVDRWBD GBC-H20N C102 (I:) (ATA)
I 14:02:48 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x)
I 14:02:48 Destination Media Sectors: 4,173,824
I 14:02:48 Write Mode: DVD
I 14:02:48 Write Type: DAO
I 14:02:48 Write Speed: 4x
I 14:02:48 Link Size: Auto
I 14:02:48 Lock Volume: Yes
I 14:02:48 Test Mode: No
I 14:02:48 OPC: No
I 14:02:48 BURN-Proof: Enabled
I 14:02:48 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 14:02:48 Book Type Setting: N/A (Reason: Invalid Command Operation Code)
W 14:03:00 User specified layer break position is such that L0 < L1.
W 14:03:00 Image Size: 129,824
W 14:03:00 User Specified L0 Sectors: 1,913,760
W 14:03:00 Calculated L1 Sectors: 4,293,183,360
W 14:03:07 User specified layer break position is such that all data will be written on L0.
W 14:03:07 Image Size: 129,824
W 14:03:07 User Specified L0 Sectors: 1,913,760
I 14:03:07 User Specified L0 Data Zone Capacity: 1,913,760
I 14:03:07 Filling Buffer... (40 MB)
I 14:03:09 Writing LeadIn...
I 14:03:40 Writing Session 1 of 1... (1 Track, LBA: 0 - 129823)
I 14:03:40 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 129823)
I 14:04:28 Synchronising Cache...
I 14:04:29 Closing Track...
I 14:04:31 Finalising Disc...
I 14:07:46 Exporting Graph Data...
I 14:07:46 Graph Data File: D:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRWBD_GBC-H20N_C102_21-MAY-2011_14-02_RICOHJPN-D01-67_4x.ibg
I 14:07:46 Export Successfully Completed!
I 14:07:46 Operation Successfully Completed! - Duration: 00:04:57
I 14:07:46 Average Write Rate: 5,409 KB/s (3.9x) - Maximum Write Rate: 5,592 KB/s (4.0x)
I 15:05:38 Operation Started!
I 15:05:38 Source File: D:\Downloads\Fable3.tor.xbox360\Archive\Fable 3.dvd
I 15:05:38 Source File Sectors: 3,827,488 (MODE1/2048)
I 15:05:38 Source File Size: 7,838,695,424 bytes
I 15:05:38 Source File Volume Identifier: DVD_ROM
I 15:05:38 Source File Volume Set Identifier: ec67c000MS UDFBridge
I 15:05:38 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 15:05:38 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 15:05:38 Source File File System(s): ISO9660, UDF (1.50)
I 15:05:38 Destination Device: [1:0:0] HL-DT-ST DVDRWBD GBC-H20N C102 (I:) (ATA)
I 15:05:38 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x)
I 15:05:38 Destination Media Sectors: 4,173,824
I 15:05:38 Write Mode: DVD
I 15:05:38 Write Type: DAO
I 15:05:38 Write Speed: 4x
I 15:05:38 Link Size: Auto
I 15:05:38 Lock Volume: Yes
I 15:05:38 Test Mode: No
I 15:05:38 OPC: No
I 15:05:38 BURN-Proof: Enabled
I 15:05:38 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 15:05:38 Book Type Setting: N/A (Reason: Invalid Command Operation Code)
I 15:05:38 User Specified L0 Data Zone Capacity: 1,913,760
I 15:06:12 Set L0 Data Zone Capacity Succeeded!
I 15:06:12 Filling Buffer... (40 MB)
I 15:06:13 Writing LeadIn...
I 15:06:16 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 15:06:16 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 15:06:16 Writing Layer 0... (LBA: 0 - 1913759)
I 15:18:15 Writing Layer 1... (LBA: 1913760 - 3827487)
W 15:20:21 Failed to Write Sectors 2067328 - 2067359 - Reason: No Seek Complete
W 15:20:21 Retrying (1 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (2 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (3 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (4 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (5 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (6 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (7 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (8 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (9 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (10 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (11 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (12 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (13 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (14 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (15 of 20)...
W 15:20:21 Retry Failed - Reason: Invalid Address For Write
W 15:20:21 Retrying (16 of 20)...
W 15:20:22 Retry Failed - Reason: Invalid Address For Write
W 15:20:22 Retrying (17 of 20)...
W 15:20:22 Retry Failed - Reason: Invalid Address For Write
W 15:20:22 Retrying (18 of 20)...
W 15:20:22 Retry Failed - Reason: Invalid Address For Write
W 15:20:22 Retrying (19 of 20)...
W 15:20:22 Retry Failed - Reason: Invalid Address For Write
W 15:20:22 Retrying (20 of 20)...
W 15:20:22 Retry Failed - Reason: Invalid Address For Write
W 15:28:49 Retrying (21)...
W 15:28:49 Retry Failed - Reason: Invalid Address For Write
E 15:28:50 Failed to Write Sectors 2067328 - 2067359 - Reason: No Seek Complete
E 15:28:50 Next Writable Address: 2066016
I 15:28:51 Synchronising Cache...
W 15:28:54 User opted to skip the 'Close Track/Session/Disc' functions.
E 15:28:54 Failed to Write Image!
I 15:28:54 Exporting Graph Data...
I 15:28:54 Graph Data File: D:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRWBD_GBC-H20N_C102_21-MAY-2011_15-05_RICOHJPN-D01-67_4x.ibg
I 15:28:54 Export Successfully Completed!
E 15:28:54 Operation Failed! - Duration: 00:23:16
I 15:28:54 Average Write Rate: 3,053 KB/s (2.2x) - Maximum Write Rate: 5,566 KB/s (4.0x)
[\quote]
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
21. May 2011 @ 12:23 |
Link to this message
|
|
|
Member
|
21. May 2011 @ 12:24 |
Link to this message
|
update your drive to lt+ and run everything through abgx just to be sure. as for the imgburn problems, it could be your DL's. What kind are you using?
|
|
hwalsh01
Junior Member
|
21. May 2011 @ 12:38 |
Link to this message
|
They are called. Aone Plus.
picked them up from my local computer store as i cant seem to find any shops that actually sell a variety of them. I did successfully play fable 3 before i did that update, dynasty warriors still works.
What is lt+ ? is that firmware for my xbox lite-on ? i just follwed the jungleflasher tutorial so just point me towards what i need and ill read up on it. thanks
|
|
scorpNZ
AfterDawn Addict
4 product reviews
|
21. May 2011 @ 13:50 |
Link to this message
|
|
"invalid address to write" means the disc has corrupted sectors basicly what attar has said is correct get better quality media & quit being cheap
|
|
hwalsh01
Junior Member
|
21. May 2011 @ 15:05 |
Link to this message
|
it wasnt so much a choice of being cheap so much as wanting to support a local business. i will attempt to burn another copy of fable 3 that has been patched via abgx360. Hopefully this wont encounter errors
|
|
Advertisement
|
|
|
|
hwalsh01
Junior Member
|
21. May 2011 @ 17:01 |
Link to this message
|
Re-burnt the iso with the patch applied onto another disk with 2.4x speed, this worked fine. Must have been a couple of bad disks in teh stack. However, if by using the unpatched version to boot to a black screen, this apparantly marks you for banning on xbox live, does this thing set a flag ? thus i cant ever connect without fear of being banned, or does it merely ban there and then? thanks all for your help.
jap psp 1000
v2.0 (ahhh i left homebrew)>2.6 >2.72 >2.82(i waited to return)>3.03 >1.50 >3.1 oea (didnt like too much) >3.03 OE-C :)
|
|
