Hey guys I recently received my bundle for usb pro and ck3i and since i got it today i took my 360 apart so i would flash to stock update than flash again with the new LT.
Problem is when i sent that liteon erase and power cycled now the drive is not being detected and i know that that happens because there is no firmware on it( i have my key already ) . Now i been trying to recover my liteon for a day now and nothing. I've tried resending the liteon erase many times, dosflash, l-o-eras and nothing has worked. I keep getting status x80. I even tried pressing ejecting button while the command was sent and with the tray half open if that matters. Even tried on my old pc with the onboard sata and same thing there. Im on windows 7 64
Am i doing something wrong here? I've flashed these before but this never happened
ok start from scratch,reboot the pc,dont turn on the drive,once the pc is up and running turn on the drive,start jungleflasher,and in mtk hit the device intro and it will ask you to do a 1 second power cycle do once or twice that should send the drive into vendor mode,and your ready to flash,,
Originally posted by coorva: any pcs you have are windows xp? try that or us differnet jungleflashers that my help also,,
i use a dos boot disk with the new dosflash v2.0, boot up pc to dos with nothing but the boot disk in, then power on the 360 connected to the pc, should be picked up as no id possible, when it asks for mtk vendor, hit no, ul get no drive properties but select the port and type "liteon e" after erase completes, reboot the 360, type dosflash at prompt and it should go straight to the drive with serial staus 0x72 ready to flash the new firmware. hope this helps as it works everytime for me!. :)
I got it to work. Seems like my ck3i came defected because it is not being detected in Windows.. powered the drive with my 360 and everything works like a charm. Thanks for all the help
